Date: Sat, 12 May 2007 11:26:29 -1000 From: Richard Puga <puga@mauibuilt.com> To: freebsd-stable@freebsd.org Subject: Re:Intel ICH5 UDMA100 controller TIMEOUT - READ_DMA Message-ID: <46463105.A3C8B7BD@mauibuilt.com>
next in thread | raw e-mail | index | archive | help
6.2 appeared to fix the problem.. I successfully wrote a large group of
files with bonnie but 20 minutes after it was done...
ad2: TIMEOUT - READ_DMA retrying (1 retry left) LBA=14607
It seems to hang more while sitting idle... pounding on the drive seems
ok, then again I could be hallucinating..
Here is the dmesg from this box..
Richard.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Feb 2 01:54:30 HST 2007
root@pele:/usr/src/sys/i386/compile/PELE
ACPI APIC Table: <PTLTD APIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS
,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20100000<NX,LM>
Logical CPUs per core: 2
real memory = 536281088 (511 MB)
avail memory = 515350528 (491 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
bge0: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xd0100000-0xd010ffff
irq 16 at device 0.0 on pci1
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:14:5e:c9:2b:f2
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pci2: <base peripheral, interrupt controller> at device 0.1 (no driver
attached)
pcib4: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pci4: <ACPI PCI bus> on pcib4
pci2: <base peripheral, interrupt controller> at device 0.3 (no driver
attached)
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1400-0x141f
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1420-0x143f
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1440-0x145f
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1460-0x147f
irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem
0xd0000000-0xd00003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
atapci0: <Promise PDC20375 SATA150 controller> port
0x2480-0x24bf,0x24c0-0x24cf,0x2400-0x247f mem
0xd0310000-0xd0310fff,0xd0320000-
0xd033ffff irq 16 at device 1.0 on pci6
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
pci6: <display, VGA> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14b0-0x14bf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq
4 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xca7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounter "TSC" frequency 2800109459 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <LITE-ON DVDRW SHW-160P6S/PS0B> at ata0-slave UDMA66
ad2: 476940MB <Hitachi HDT725050VLA360 V56OA73A> at ata1-master SATA150
ad3: 476940MB <Hitachi HDT725050VLA360 V56OA73A> at ata1-slave SATA150
Trying to mount root from ufs:/dev/ad2s1a
cd0 at ata0 bus 0 target 1 lun 0
cd0: <LITE-ON DVDRW SHW-160P6S PS0B> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
bge0: link state changed to UP
ad2: TIMEOUT - READ_DMA retrying (1 retry left) LBA=14607
ad2: TIMEOUT - READ_DMA48 retrying (1 retry left) LBA=401677055
ad2: TIMEOUT - READ_DMA48 retrying (0 retries left) LBA=401677055
ad2: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED>
LBA=401677055
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46463105.A3C8B7BD>