Date: Fri, 02 Jan 2015 21:45:18 +0000 From: Steven Hartland <killing@multiplay.co.uk> To: freebsd-stable@freebsd.org Subject: Re: I need some swap partion help on new 10.1 install Message-ID: <54A7116E.5070704@multiplay.co.uk> In-Reply-To: <20150102210855.GE867@rancor.immure.com> References: <20150102210855.GE867@rancor.immure.com>
next in thread | previous in thread | raw e-mail | index | archive | help
It did you just have disk idents enabled, which IMO are a PITA.
Add this to /boot/loader.conf and you'll see the normal device names again.
kern.geom.label.disk_ident.enable="0"
If you also don't want gpt's or gptid's you can also add:
kern.geom.label.gpt.enable="0"
kern.geom.label.gptid.enable="0"
Regards
Steve
On 02/01/2015 21:08, Bob Willcox wrote:
> I just installed 10.1-release on a Samaung EVO 250 SSD using the guided ZFS
> install steps. Unfortunately, the swap device (it partition does exist on the
> drive) isn't being created:
>
> # cat /etc/fstab
> # Device Mountpoint FStype Options Dump Pass#
> /dev/ada0p2 none swap sw 0 0
>
> # ls -l /dev/ada0*
> crw-r----- 1 root operator 0x57 Jan 2 14:29 /dev/ada0
>
> # swapinfo
> Device 1K-blocks Used Avail Capacity
>
> # gpart list
> Geom name: diskid/DISK-S21NNSAFC51114F
> modified: false
> state: OK
> fwheads: 16
> fwsectors: 63
> last: 488397134
> first: 34
> entries: 128
> scheme: GPT
> Providers:
> 1. Name: diskid/DISK-S21NNSAFC51114Fp1
> Mediasize: 524288 (512K)
> Sectorsize: 512
> Stripesize: 0
> Stripeoffset: 17408
> Mode: r0w0e0
> rawuuid: ed197570-92ff-11e4-a9cb-6805ca13097a
> rawtype: 83bd6b9d-7f41-11dc-be0b-001560b84f0f
> label: gptboot0
> length: 524288
> offset: 17408
> type: freebsd-boot
> index: 1
> end: 1057
> start: 34
> 2. Name: diskid/DISK-S21NNSAFC51114Fp2
> Mediasize: 8589934592 (8.0G)
> Sectorsize: 512
> Stripesize: 0
> Stripeoffset: 541696
> Mode: r0w0e0
> rawuuid: ed35488d-92ff-11e4-a9cb-6805ca13097a
> rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
> label: swap0
> length: 8589934592
> offset: 541696
> type: freebsd-swap
> index: 2
> end: 16778273
> start: 1058
> 3. Name: diskid/DISK-S21NNSAFC51114Fp3
> Mediasize: 241468856832 (225G)
> Sectorsize: 512
> Stripesize: 0
> Stripeoffset: 541696
> Mode: r1w1e1
> rawuuid: ed38d5f9-92ff-11e4-a9cb-6805ca13097a
> rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
> label: zfs0
> length: 241468856832
> offset: 8590476288
> type: freebsd-zfs
> index: 3
> end: 488397134
> start: 16778274
> Consumers:
> 1. Name: diskid/DISK-S21NNSAFC51114F
> Mediasize: 250059350016 (233G)
> Sectorsize: 512
> Mode: r1w1e2
>
> So, what did I miss? Why isn't the /dev/ada0p2 device getting created?
>
> Thanks for any help!
>
> Bob
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?54A7116E.5070704>