Date: Sun, 26 Feb 2006 21:29:47 -0500 (EST) From: "Mikhail T." <mi@aldan.algebra.com> To: current@FreeBSD.org, multimedia@FreeBSD.org, re@FreeBSD.org Subject: today's 6.1 would not boot here Message-ID: <200602270229.k1R2TlKm000883@aldan.algebra.com>
next in thread | raw e-mail | index | archive | help
--ELM1141007387-826-0_
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=US-ASCII
Hello!
My amd64 system was running:
6.0-STABLE FreeBSD 6.0-STABLE #5: Sun Nov 20 20:06:48 EST 2005
since the above date quite happily. I've rebuilt world and kernel today
and tried rebooting.
The 6.1-PRERELEASE boot hangs solid (not even Scroll Lock/Page Up is
possible) after printing (in verbose mode):
pcm0: measured ac97 link rate at 48161 Hz, will use 48000 Hz
I'm attaching the 6.0's dmesg.boot -- in it, the above message is
followed by the ciss-driver messages, but I have no idea, where the
hang is.
I don't think, ciss was modified much in the last 3 months, but the
audio drivers underwent some work, apparently...
This obviously is a show-stopper for me -- probably, for some others
too... Thanks!
Yours,
-mi
--ELM1141007387-826-0_
Content-Transfer-Encoding: 7bit
Content-Type: text/plain
Content-Disposition: attachment; filename=dmesg.boot
Content-Description:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #5: Sun Nov 20 20:06:48 EST 2005
mi@aldan.algebra.com:/var/src/sys/amd64/compile/GENERIC-aldan
Preloaded elf kernel "boot/kernel.old/kernel" at 0xffffffff80706000.
Calibrating clock(s) ... i8254 clock: 1193417 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2205020279 Hz
CPU: Dual Core AMD Opteron(tm) Processor 275 (2205.02-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
HTT bit cleared - FreeBSD does not have licenseing issues requiring it.
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 5905580032 (5632 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000805000 - 0x0000000095abffff, 2502668288 bytes (611003 pages)
0x0000000100000000 - 0x000000015ffeffff, 1610547200 bytes (393200 pages)
avail memory = 4102893568 (3912 MB)
ACPI APIC Table: <A M I OEMAPIC >
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 3, Interrupt 24 at 0xbe8ff000
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)
MADT: Found IO APIC ID 4, Interrupt 28 at 0xbe8fe000
ioapic2: intpin 0 -> PCI IRQ 28 (level, low)
ioapic2: intpin 1 -> PCI IRQ 29 (level, low)
ioapic2: intpin 2 -> PCI IRQ 30 (level, low)
ioapic2: intpin 3 -> PCI IRQ 31 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x0001000f pcm: 0x00010000
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80022814
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=74541022)
AcpiOsDerivePciId: bus 0 dev 7 func 1
AcpiOsDerivePciId: bus 0 dev 7 func 3
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: <ACPI PCI Link LNKD> irq 9 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x5010
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1022, dev=0x7454, revid=0x13
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x1022, dev=0x7455, revid=0x13
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0106, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7460, revid=0x07
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7468, revid=0x05
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7469, revid=0x03
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x1022, dev=0x746a, revid=0x02
bus=0, slot=7, func=2
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
map[10]: type 4, range 32, base 0000c480, size 5, enabled
pcib0: matched entry for 0.7.INTD
pcib0: slot 7 INTD hardwired to IRQ 19
found-> vendor=0x1022, dev=0x746b, revid=0x05
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x746d, revid=0x03
bus=0, slot=7, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type 4, range 32, base 0000c800, size 8, enabled
map[14]: type 4, range 32, base 0000cc00, size 6, enabled
pcib0: matched entry for 0.7.INTB
pcib0: slot 7 INTB hardwired to IRQ 17
found-> vendor=0x1022, dev=0x7450, revid=0x12
bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=0, slot=10, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 64, base be8ff000, size 12, enabled
found-> vendor=0x1022, dev=0x7450, revid=0x12
bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=0, slot=11, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 64, base be8fe000, size 12, enabled
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
agp0: <AMD 8151 AGP graphics tunnel> mem 0xe0000000-0xefffffff at device 0.0 on pci0
agp0: 1 Miscellaneous Control unit(s) found.
agp0: Aperture Base[0]: 0x00000050
agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x7000-0x9fff
pcib2: memory decode 0xbe300000-0xbe3fffff
pcib2: prefetched decode 0xbe900000-0xde8fffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x1022, dev=0x7464, revid=0x0b
bus=2, slot=0, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=9
map[10]: type 1, range 32, base be3ed000, size 12, enabled
pcib2: (null) requested memory range 0xbe3ed000-0xbe3edfff: good
pcib2: matched entry for 2.0.INTD
pcib2: slot 0 INTD hardwired to IRQ 19
found-> vendor=0x1022, dev=0x7464, revid=0x0b
bus=2, slot=0, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=9
map[10]: type 1, range 32, base be3ee000, size 12, enabled
pcib2: (null) requested memory range 0xbe3ee000-0xbe3eefff: good
pcib2: matched entry for 2.0.INTD
pcib2: slot 0 INTD hardwired to IRQ 19
found-> vendor=0x9004, dev=0x8178, revid=0x01
bus=2, slot=4, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 00009800, size 8, enabled
pcib2: (null) requested I/O range 0x9800-0x98ff: in range
map[14]: type 1, range 32, base be3ef000, size 12, enabled
pcib2: (null) requested memory range 0xbe3ef000-0xbe3effff: good
pcib2: matched entry for 2.4.INTA
pcib2: slot 4 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x5964, revid=0x01
bus=2, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base c0000000, size 28, enabled
pcib2: (null) requested memory range 0xc0000000-0xcfffffff: good
map[14]: type 4, range 32, base 00009000, size 8, enabled
pcib2: (null) requested I/O range 0x9000-0x90ff: in range
map[18]: type 1, range 32, base be3f0000, size 16, enabled
pcib2: (null) requested memory range 0xbe3f0000-0xbe3fffff: good
pcib2: matched entry for 2.5.INTA
pcib2: slot 5 INTA hardwired to IRQ 17
found-> vendor=0x104c, dev=0x8023, revid=0x00
bus=2, slot=6, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base be3ec800, size 11, enabled
pcib2: (null) requested memory range 0xbe3ec800-0xbe3ecfff: good
map[14]: type 1, range 32, base be3e8000, size 14, enabled
pcib2: (null) requested memory range 0xbe3e8000-0xbe3ebfff: good
pcib2: matched entry for 2.6.INTA
pcib2: slot 6 INTA hardwired to IRQ 18
found-> vendor=0x1033, dev=0x0035, revid=0x43
bus=2, slot=7, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base be3e6000, size 12, enabled
pcib2: (null) requested memory range 0xbe3e6000-0xbe3e6fff: good
pcib2: matched entry for 2.7.INTA
pcib2: slot 7 INTA hardwired to IRQ 19
found-> vendor=0x1033, dev=0x0035, revid=0x43
bus=2, slot=7, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base be3e7000, size 12, enabled
pcib2: (null) requested memory range 0xbe3e7000-0xbe3e7fff: good
pcib2: matched entry for 2.7.INTB
pcib2: slot 7 INTB hardwired to IRQ 16
found-> vendor=0x1033, dev=0x00e0, revid=0x04
bus=2, slot=7, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
intpin=c, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base be3ec400, size 8, enabled
pcib2: (null) requested memory range 0xbe3ec400-0xbe3ec4ff: good
pcib2: matched entry for 2.7.INTC
pcib2: slot 7 INTC hardwired to IRQ 17
ohci0: <OHCI (generic) USB controller> mem 0xbe3ed000-0xbe3edfff irq 19 at device 0.0 on pci2
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xbe3ed000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xbe3ee000-0xbe3eefff irq 19 at device 0.1 on pci2
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xbe3ee000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x9800-0x98ff mem 0xbe3ef000-0xbe3effff irq 16 at device 4.0 on pci2
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9800
ahc0: Enabling 39Bit Addressing
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable is present, internal 68 cable not present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 449 instructions downloaded
ahc0: Features 0x10005, Bugs 0x11, Flags 0x29485440
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
drm0: <ATI Radeon RV280 9200 SE> port 0x9000-0x90ff mem 0xc0000000-0xcfffffff,0xbe3f0000-0xbe3fffff irq 17 at device 5.0 on pci2
info: [drm] Initialized radeon 1.16.0 20050311 on minor 0
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xbe3ec800-0xbe3ecfff,0xbe3e8000-0xbe3ebfff irq 18 at device 6.0 on pci2
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xbe3ec800
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:00:00:00:00:f0:12
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:00:00:f0:12
fwe0: bpf attached
fwe0: Ethernet address: 02:00:00:00:f0:12
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ohci2: <NEC uPD 9210 USB controller> mem 0xbe3e6000-0xbe3e6fff irq 19 at device 7.0 on pci2
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xbe3e6000
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ohci3: <NEC uPD 9210 USB controller> mem 0xbe3e7000-0xbe3e7fff irq 16 at device 7.1 on pci2
ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xbe3e7000
ohci3: [GIANT-LOCKED]
usb3: OHCI version 1.0
usb3: <NEC uPD 9210 USB controller> on ohci3
usb3: USB revision 1.0
uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xbe3ec400-0xbe3ec4ff irq 17 at device 7.2 on pci2
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xbe3ec400
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 3 ports each: usb2 usb3
usb4: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 5 ports with 5 removable, self powered
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
amdpm0: <AMD 756/766/768/8111 Power Management Controller> port 0x50e0-0x50ff at device 7.3 on pci0
smbus0: <System Management Bus> on amdpm0
smb0: <SMBus generic I/O> on smbus0
pcm0: <AMD-8111> port 0xc800-0xc8ff,0xcc00-0xcc3f irq 17 at device 7.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc800
pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xcc00
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC655 AC97 Codec (id = 0x414c4760)>
pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features reserved 1, center DAC, surround DAC, LFE DAC, reserved 5
pcm0: sndbuf_setmap 957bc000, 4000; 0xffffffffb3b85000 -> 957bc000
pcm0: sndbuf_setmap 957b8000, 4000; 0xffffffffb3b89000 -> 957b8000
pcib3: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xa000-0xafff
pcib3: memory decode 0xbe400000-0xbe5fffff
pcib3: prefetched decode 0xde900000-0xde9fffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x14e4, dev=0x1645, revid=0x15
bus=3, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base be5f0000, size 16, enabled
pcib3: (null) requested memory range 0xbe5f0000-0xbe5fffff: good
pcib3: matched entry for 3.1.INTA
pcib3: slot 1 INTA hardwired to IRQ 25
found-> vendor=0x1095, dev=0x3114, revid=0x02
bus=3, slot=5, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000ac00, size 3, enabled
pcib3: (null) requested I/O range 0xac00-0xac07: in range
map[14]: type 4, range 32, base 0000a880, size 2, enabled
pcib3: (null) requested I/O range 0xa880-0xa883: in range
map[18]: type 4, range 32, base 0000a800, size 3, enabled
pcib3: (null) requested I/O range 0xa800-0xa807: in range
map[1c]: type 4, range 32, base 0000a480, size 2, enabled
pcib3: (null) requested I/O range 0xa480-0xa483: in range
map[20]: type 4, range 32, base 0000a400, size 4, enabled
pcib3: (null) requested I/O range 0xa400-0xa40f: in range
map[24]: type 1, range 32, base be5dfc00, size 10, enabled
pcib3: (null) requested memory range 0xbe5dfc00-0xbe5dffff: good
pcib3: matched entry for 3.5.INTA
pcib3: slot 5 INTA hardwired to IRQ 25
bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xbe5f0000-0xbe5fffff irq 25 at device 1.0 on pci3
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xbe5f0000
miibus0: <MII bus> on bge0
brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:0a:5e:51:8c:f8
bge0: [MPSAFE]
atapci1: <SiI 3114 SATA150 controller> port 0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f mem 0xbe5dfc00-0xbe5dffff irq 25 at device 5.0 on pci3
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa400
atapci1: [MPSAFE]
atapci1: Reserved 0x400 bytes for rid 0x24 type 3 at 0xbe5dfc00
ata2: <ATA channel 0> on atapci1
ata2: SATA connect status=00000000
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata4: <ATA channel 2> on atapci1
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata5: <ATA channel 3> on atapci1
ata5: SATA connect status=00000000
ata5: [MPSAFE]
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xb000-0xbfff
pcib4: memory decode 0xbe600000-0xbe7fffff
pcib4: prefetched decode 0xdea00000-0xdeafffff
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
found-> vendor=0x0e11, dev=0x0046, revid=0x01
bus=4, slot=1, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D3 current D0
map[10]: type 1, range 64, base be7fe000, size 13, enabled
pcib4: (null) requested memory range 0xbe7fe000-0xbe7fffff: good
map[18]: type 4, range 32, base 0000b800, size 8, enabled
pcib4: (null) requested I/O range 0xb800-0xb8ff: in range
map[1c]: type 1, range 64, base be780000, size 18, enabled
pcib4: (null) requested memory range 0xbe780000-0xbe7bffff: good
pcib4: matched entry for 4.1.INTA
pcib4: slot 1 INTA hardwired to IRQ 29
ciss0: <HP Smart Array 642> port 0xb800-0xb8ff mem 0xbe7fe000-0xbe7fffff,0xbe780000-0xbe7bffff irq 29 at device 1.0 on pci4
ciss0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xbe7fe000
ciss0: [GIANT-LOCKED]
ciss0: using 256 of 1024 available commands
ciss0: firmware 2.34
ciss0: 2 SCSI channels
ciss0: signature 'CISS'
ciss0: valence 1
ciss0: supported I/O methods 0x80000006<simple,performant>
ciss0: active I/O method 0x3<simple>
ciss0: 4G page base 0x00000000
ciss0: interrupt coalesce delay 1000us
ciss0: interrupt coalesce count 16
ciss0: max outstanding commands 1024
ciss0: bus types 0x2<ultra3>
ciss0: server name ''
ciss0: heartbeat 0x1000008d
ciss0: 3 physical devices
ciss0: 2 logical drives
ciss0: logical drive (b0t0): RAID 0, 69120MB online
ciss0: logical drive (b0t1): RAID 0, 69632MB online
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
sio0: irq maps: 0x8001 0x8011 0x8001 0x8001
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0x8001 0x8009 0x8001 0x8001
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcd7ff,0xcd800-0xcdfff,0xce000-0xd1fff,0xd2000-0xd2fff on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ulpt0: hp photosmart 7350, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
Device configuration finished.
Reducing kern.maxvnodes 233016 -> 100000
linprocfs registered
procfs registered
lapic: Divisor 2, Frequency 100227548 hz
Timecounter "TSC" frequency 2205020279 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
acd0: setting PIO4 on AMD 8111 chip
acd0: setting UDMA66 on AMD 8111 chip
acd0: <MATSHITADVD-RAM SW-9585/B100> DVDR drive at ata1 as master
acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA66
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
pcm0: measured ac97 link rate at 48161 Hz, will use 48000 Hz
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
(probe0:ciss0:0:0:0): error 22
(probe0:ciss0:0:0:0): Unretryable Error
(probe1:ciss0:0:1:0): error 22
(probe1:ciss0:0:1:0): Unretryable Error
(probe66:sbp0:0:6:0): error 22
(probe66:sbp0:0:6:0): Unretryable Error
(probe60:sbp0:0:0:0): error 22
(probe60:sbp0:0:0:0): Unretryable Error
(probe61:sbp0:0:1:0): error 22
(probe61:sbp0:0:1:0): Unretryable Error
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
(probe0:ciss0:0:0:0): error 22
(probe0:ciss0:0:0:0): Unretryable Error
(probe1:ciss0:0:1:0): error 22
(probe1:ciss0:0:1:0): Unretryable Error
(probe62:sbp0:0:2:0): error 22
(probe62:sbp0:0:2:0): Unretryable Error
(probe63:sbp0:0:3:0): error 22
(probe63:sbp0:0:3:0): Unretryable Error
(probe64:sbp0:0:4:0): error 22
(probe64:sbp0:0:4:0): Unretryable Error
(probe65:sbp0:0:5:0): error 22
(probe65:sbp0:0:5:0): Unretryable Error
ahc0: Selection Timeout on A:4. 0 SCBs aborted
ahc0: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Selection Timeout on A:8. 0 SCBs aborted
ahc0: Selection Timeout on A:9. 0 SCBs aborted
ahc0: Selection Timeout on A:10. 0 SCBs aborted
ahc0: Selection Timeout on A:0. 0 SCBs aborted
ahc0: Selection Timeout on A:1. 0 SCBs aborted
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Selection Timeout on A:11. 0 SCBs aborted
ahc0: Selection Timeout on A:12. 0 SCBs aborted
ahc0: Selection Timeout on A:13. 0 SCBs aborted
ahc0: Selection Timeout on A:14. 0 SCBs aborted
ahc0: Selection Timeout on A:15. 0 SCBs aborted
(probe50:ahc0:0:5:0): error 22
(probe50:ahc0:0:5:0): Unretryable Error
(probe47:ahc0:0:2:0): error 22
(probe47:ahc0:0:2:0): Unretryable Error
(ahc0:A:5:0): Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period c, offset f
Filtered to period c, offset f
ahc0: target 5 synchronous at 20.0MHz, offset = 0xf
(ahc0:A:2:0): Sending SDTR period c, offset f
(ahc0:A:2:0): Received SDTR period 1e, offset f
Filtered to period 1e, offset f
ahc0: target 2 synchronous at 8.0MHz, offset = 0xf
(ahc0:A:5:0): Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period c, offset f
Filtered to period c, offset f
(ahc0:A:2:0): Sending SDTR period 1e, offset f
(ahc0:A:2:0): Received SDTR period 1e, offset f
Filtered to period 1e, offset f
pass0 at ahc0 bus 0 target 2 lun 0
pass0: <YAMAHA CRW4416S 1.0g> Removable CD-ROM SCSI-2 device
pass0: 8.333MB/s transfers (8.333MHz, offset 15)
pass1 at ahc0 bus 0 target 5 lun 0
pass1: <NEC CD-ROM DRIVE:465 1.13> Removable CD-ROM SCSI-2 device
pass1: 20.000MB/s transfers (20.000MHz, offset 15)
pass2 at ciss0 bus 0 target 0 lun 0
pass2: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device
pass2: 135.168MB/s transfers
pass3 at ciss0 bus 0 target 1 lun 0
pass3: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device
pass3: 135.168MB/s transfers
Gda0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 69419MB (142171680 512 byte sectors: 255H 32S/T 17423C)
da1 at ciss0 bus 0 target 1 lun 0
da1: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device
da1: 135.168MB/s transfers
da1: 70001MB (143363040 512 byte sectors: 255H 32S/T 17569C)
EOM: new disk cd0(ahc0:A:2:0): Sending SDTR period 1e, offset f
GEOM: new disk cd1
GEOM: new disk da0(ahc0:A:2:0): Received SDTR period 1e, offset f
Filtered to period 1e, offset f
GEOM: new disk da1
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic1: routing intpin 1 (PCI IRQ 25) to cluster 0
ioapic2: routing intpin 1 (PCI IRQ 29) to cluster 0
(cd0:ahc0:0:2:0): error 6
(cd0:ahc0:0:2:0): Unretryable Error
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <YAMAHA CRW4416S 1.0g> Removable CD-ROM SCSI-2 device
cd0: 8.333MB/s transfers (8.333MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
(ahc0:A:5:0): Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period c, offset f
Filtered to period c, offset f
(cd1:ahc0:0:5:0): error 6
(cd1:ahc0:0:5:0): Unretryable Error
cd1 at ahc0 bus 0 target 5 lun 0
cd1: <NEC CD-ROM DRIVE:465 1.13> Removable CD-ROM SCSI-2 device
cd1: 20.000MB/s transfers (20.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
(ahc0:A:2:0): Sending SDTR period 1e, offset f
(ahc0:A:2:0): Received SDTR period 1e, offset f
Filtered to period 1e, offset f
(cd0:ahc0:0:2:0): error 6
(cd0:ahc0:0:2:0): Unretryable Error
(ahc0:A:2:0): Sending SDTR period 1e, offset f
(ahc0:A:2:0): Received SDTR period 1e, offset f
Filtered to period 1e, offset f
(cd0:ahc0:0:2:0): error 6
(cd0:ahc0:0:2:0): Unretryable Error
(ahc0:A:2:0): Sending SDTR period 1e, offset f
(ahc0:A:2:0): Received SDTR period 1e, offset f
Filtered to period 1e, offset f
(cd0:ahc0:0:2:0): error 6
(cd0:ahc0:0:2:0): Unretryable Error
(ahc0:A:2:0): Sending SDTR period 1e, offset f
(ahc0:A:2:0): Received SDTR period 1e, offset f
Filtered to period 1e, offset f
(cd0:ahc0:0:2:0): error 6
(cd0:ahc0:0:2:0): Unretryable Error
(ahc0:A:5:0): Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period c, offset f
Filtered to period c, offset f
(cd1:ahc0:0:5:0): error 6
(cd1:ahc0:0:5:0): Unretryable Error
(ahc0:A:5:0): Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period c, offset f
Filtered to period c, offset f
(cd1:ahc0:0:5:0): error 6
(cd1:ahc0:0:5:0): Unretryable Error
Trying to mount root from ufs:/dev/da0s1a
start_init: trying /sbin/init
bge0: link state changed to UP
--ELM1141007387-826-0_--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200602270229.k1R2TlKm000883>