Date: Wed, 22 Oct 1997 14:37:49 -0700 (PDT) From: sarge@metapsy.org (User SargeFrank A. Gerbode) To: freebsd-questions@FreeBSD.ORG, phillips@best.com Subject: Error messages running rc.network Message-ID: <199710222137.OAA02498@metapsy.org>
index | next in thread | raw e-mail
On startup, I get error messages:
writing to routing socket: File exists
add net default: gateway 206.184.243.169 - file exists
writing to routing socket: Invalid argument
add net: invalid argument
All of this happens while the machine is running rc.network, the
following section thereof:
if [ "x$defaultrouter" != "xNO" ] ; then
static_routes="default ${static_routes}"
route_default="default ${defaultrouter}"
fi
# NOTE: after the above:
#
# static_routes is "default loopback"
# route_default is "default 206.184.243.169"
#
# END of NOTE
# Set up any static routes. This should be done before router discovery.
if [ "x${static_routes}" != "x" ]; then
for i in ${static_routes}; do
eval route_args=\$route_${i}
route add ${route_args}
done
fi
I imagine the problem may be in the rc.conf file (I just upgraded
from 2.1.6 to 2.2.0).
Here is the networking section of rc.conf, as I have configured it:
##############################################################
### Network configuration sub-section ######################
##############################################################
### Basic network options: ###
hostname="zim" # Set this!
nisdomainname="metapsy.org" # Set to NIS domain if using NIS (or NO).
firewall="NO" # Set to firewall type or NO for none.
tcp_extensions="YES" # Allow RFC1323 & RFC1544 extensions (or NO).
network_interfaces="ep0 lo0" # List of network interfaces (lo0 is loopback).
ifconfig_ep0="inet 206.184.243.174 netmask 255.255.255.248"
ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
### Network daemon (miscellaneous) & NFS options: ###
syslogd_enable="YES" # Run syslog daemon (or NO).
syslogd_flags="" # Flags to syslogd (if enabled).
inetd_flags="" # Optional flags to inetd (always enabled).
named_enable="YES" # Run named, the DNS server (or NO).
named_flags="-b /etc/namedb/named.boot" # Flags to named (if enabled).
kerberos_server_enable="YES" # Run a kerberos master server (or NO).
rwhod_enable="YES" # Run the rwho daemon (or NO).
amd_enable="NO" # Run amd service with $amd_flags (or NO).
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
nfs_client_enable="NO" # This host is an NFS client (or NO).
nfs_server_enable="NO" # This host is an NFS server (or NO).
weak_mountd_authentication="NO" # Running PCNFSD / other non-root nfsd (or NO).
nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server.
rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO).
portmap_enable="YES" # Run the portmapper service (or NO).
portmap_flags="" # Flags to portmap (if enabled).
xtend_enable="NO" # Run the X-10 power controller daemon.
xtend_flags="" # Flags to xtend (if enabled).
### Network Time Services options: ###
timed_enabled="NO" # Run the time daemon (or NO).
timed_flags="" # Flags to timed (if enabled).
ntpdate_enable="NO" # Run the ntpdate to sync time (or NO).
ntpdate_flags="" # Flags to ntpdate (if enabled).
xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO).
xntpd_flags="" # Flags to xntpd (if enabled).
tickadj_enable="NO" # Run tickadj (or NO).
tickadj_flags="-Aq" # Flags to tickadj (if enabled).
# Network Information Services (NIS) options: ###
nis_client_enable="NO" # We're an NIS client (or NO)
nis_client_flags="" # Flags to ypbind (if enabled).
nis_ypset_enable="NO" # Run ypset at boot time (or NO).
nis_ypset_flags="" # Flags to ypset (if enabled).
nis_server_enable="YES" # We're an NIS server (or NO)
nis_server_flags="" # Flags to ypserv (if enabled).
nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
### Network routing options: ###
defaultrouter="206.184.243.169" # Set to default gateway (or NO).
static_routes="loopback" # Set to static route list (or leave empty).
gateway_enable="NO" # Set to YES if this host will be a gateway.
router_enable="NO" # Set to YES to enable a routing daemon.
router="routed" # Name of routing daemon to use if enabled.
router_flags="-q" # Flags for routing daemon.
mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf)
ipxgateway_enable="NO" # Set to YES to enable IPX routing.
ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
ipxrouted_flags="" # Flags for IPX routing daemon.
arpproxy_all="" # obsolete kernel option ARP_PROXY_ALL equiv.
************
Please help!!
--
Frank A. Gerbode, M.D. (frank@metapsy.org)
737 Addison St.; Palo Alto, CA 94301-3302
Work: 650-325-7961 Home phone: 650-325-0117 Fax: 650-325-7924
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199710222137.OAA02498>