Date: Wed, 13 Dec 2006 16:16:46 +0200 From: Ian FREISLICH <if@hetzner.co.za> To: Mike Tancsa <mike@sentex.net> Cc: FreeBSD current mailing list <Current@freebsd.org> Subject: Re: PCI sio card Message-ID: <E1GuUuc-0000dh-Aj@hetzner.co.za> In-Reply-To: Message from Mike Tancsa <mike@sentex.net> of "Wed, 13 Dec 2006 07:18:44 EST." <200612131220.kBDCK1Sh034054@lava.sentex.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
Mike Tancsa wrote:
> At 01:36 AM 12/13/2006, Ian FREISLICH wrote:
> > > used to be an issue of loading puc as a kld. Try statically compiling
> > > it in the kernel along with device uart (not sio) and see if
> > > /dev/cuau# devices come up.
> >
> >I've tried compiling puc+scc+uart into the kernel. I've tried this
> >with and without sio and scc in all the permutations. It detects the
> >puc, but I get no cuad devices.
>
> It should come up as /dev/cuau# not cuad. With puc and uart in the
> kernel, what does the dmesg show ?
With:
device puc
device uart
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #6: Wed Dec 13 08:16:00 SAST 2006
ianf@ipacct1.cpt2.host-h.net:/usr/obj/usr/src/sys/FIREWALL
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz (1861.97-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,XTPR,<b15>>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1072300032 (1022 MB)
avail memory = 1040420864 (992 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x7000-0x7007 mem 0xcfe00000-0xcfe7ffff,0
xd0000000-0xdfffffff,0xcfe80000-0xcfebffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: detected 764k stolen memory
agp0: aperture size is 256M
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection Version - 6.1.4 - TSO> port 0xd800-0x
d81f mem 0xcffe0000-0xcfffffff irq 17 at device 0.0 on pci2
em0: Ethernet address: 00:17:31:59:67:70
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.3 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib3
puc0: <Timedia technology 2 Port Serial> port 0xc800-0xc81f irq 21 at device 9.0
on pci1
puc0: [FAST]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0xa000-0xa007,0x9800-0x9803,0x9400
-0x9407,0x9000-0x9003,0x8800-0x880f irq 18 at device 31.1 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0xb800-0xb807,0xb400-0xb403,0xb000
-0xb007,0xa800-0xa803,0xa400-0xa40f irq 17 at device 31.2 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
ichsmb0: <SMBus controller> port 0x400-0x41f at device 31.3 on pci0
device_attach: ichsmb0 attach returned 6
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi
0
fdc0: [FAST]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
Timecounters tick every 1.000 msec
ipfw2 initialized, divert loadable, rule-based forwarding enabled, default to de
ny, logging unlimited
ad8: 305245MB <Seagate ST3320620AS 3.AAC> at ata4-master SATA150
ad10: 305245MB <Seagate ST3320620AS 3.AAC> at ata5-master SATA150
ar0: 305245MB <Intel MatrixRAID RAID1> status: READY
ar0: disk0 READY (master) using ad10 at ata5-master
ar0: disk1 READY (mirror) using ad8 at ata4-master
SMP: AP CPU #1 Launched!
[ipacct1.cpt2] ~ $ ls /dev/cu*
ls: /dev/cu*: No such file or directory
Ian
--
Ian Freislich
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1GuUuc-0000dh-Aj>