Date: Sat, 23 Jan 2021 18:54:37 +0100 From: Stefan Bethke <stb@lassitu.de> To: freebsd-stable <freebsd-stable@freebsd.org> Subject: Re: APU3 ethernet can't transmit Message-ID: <52C90CB8-76DD-47EB-8C30-435920FF0B79@lassitu.de> In-Reply-To: <BB6576BD-9E6B-470B-B010-1844DC68F37A@lassitu.de> References: <94989F4E-73D8-4938-A4B5-4677C3D7531B@lassitu.de> <bfa51dac-bed1-ba1d-bac1-59bf71e21d0e@menhennitt.com.au> <68042FF6-679F-42A5-B23E-A594F02EB8E2@gid.co.uk> <BB6576BD-9E6B-470B-B010-1844DC68F37A@lassitu.de>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --] Argh! It was my el cheapo desktop switch. I tried two ports and two cables, they were working with my laptop, but not with the APU. Only when I hooked up a different device this evening and couldn't talk to it did I think of the switch. Powercycling "fixed" it. Time for an upgrade, I think. Stefan > Am 23.01.2021 um 12:50 schrieb Stefan Bethke <stb@lassitu.de>: > > > I've tried one more time with this in rc.conf: > > network_interfaces="igb0" > ifconfig_igb0="-lro -vlanhwtso -tso4 -vlanhwfilter -rxcsum -txcsum -vlanhwtag -vlanmtu -vlanhwcsum -tso6 -txcsum6" > > Whick produces this: options=802020<JUMBO_MTU,WOL_MAGIC> > > No joy. What's interesting is that the left LED on the plug in blinking with about 2Hz, so clearly the PHY or controller is unhappy about something. The i210 datasheet has a table with all modes the LEDs support, but it doesn't mention this fast blinking. The right LED is on constantly, which should indicate a link. This is the same on all three ports, irrespective of configuration. > > I also just tried netbooting, and that doesn't seem to be working either. So I guess it's time to RMA it. > > Stefan > >> Am 23.01.2021 um 11:28 schrieb Bob Bishop <rb@gid.co.uk>: >> >> Hi, >> >> FWIW I found that applying -lro didn’t work retrospectively, it had to be done when the interface was first configured. Might apply to other options too. >> >> -- >> Bob Bishop >> rb@gid.co.uk >> >>> On 22 Jan 2021, at 23:42, Graham Menhennitt <graham@menhennitt.com.au> wrote: >>> >>> Try "ifconfig $ifname -rxcsum -txcsum" and possibly " -vlanhwtso -tso4" as well. >>> >>> Graham >>> >>> On 23/01/2021 8:10 am, Stefan Bethke wrote: >>>> I have a weird situation with an PCEngines APU3, where I can't seem to be able to transmit packets through either of the igb interfaces. With tcpdump, I can see packets arriving, and the interface flags appear to be just fine: >>>> options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> >>>> ether 00:0d:b9:58:xx:xx >>>> inet6 fe80::20d:b9ff:xxxx:xxxx%igb0 prefixlen 64 scopeid 0x1 >>>> inet6 2a02:8108:4840:xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 autoconf >>>> inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 >>>> media: Ethernet autoselect (1000baseT <full-duplex>) >>>> status: active >>>> nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> >>>> >>>> dhclient is running on that interfaces, and I got an IPv6 address through RA. >>>> >>>> Assigning an address manually doesn't change anything. >>>> >>>> igb0@pci0:1:0:0: class=0x020000 card=0x00008086 chip=0x157b8086 rev=0x03 hdr=0x00 >>>> vendor = 'Intel Corporation' >>>> device = 'I210 Gigabit Network Connection' >>>> class = network >>>> subclass = ethernet >>>> >>>> # freebsd-version >>>> 12.2-RELEASE >>>> >>>> I installed 12.2-REL a couple of weeks ago, and haven't done anything since. >>>> >>>> Tried the three different port with different cables on different switch ports, which are working fine with other machines. >>>> >>>> I'm installing updates now via a USB adapter. >>>> >>>> Any suggestions? >>>> >>>> >>>> Stefan >>>> >>>> -- >>>> Stefan Bethke <stb@lassitu.de> Fon +49 151 14070811 >>>> >>> _______________________________________________ >>> freebsd-stable@freebsd.org mailing list >>> https://lists.freebsd.org/mailman/listinfo/freebsd-stable >>> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >>> >> >> _______________________________________________ >> freebsd-stable@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" > > -- > Stefan Bethke <stb@lassitu.de> Fon +49 151 14070811 > -- Stefan Bethke <stb@lassitu.de> Fon +49 151 14070811 [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- iQEzBAEBCgAdFiEEJ+hF98o4r3eU/HiPD885WK4W4sEFAmAMYt0ACgkQD885WK4W 4sFzrAf/cZwwgJaXP5kNLNHVCgXyTYilmocMZeJHo7RSPTOUqnYN7r4HA/zmO+Vz lhVfwV7zUMFRzY7+zO+7NXrqY3h7HJiRVmRu1VePuaLIqE7mVLaNjunNEulZ5ehF h1c4uTNEJlZoP1ZVAJWA2mYikrfqLbl7SnU17t9OX7+lF8f6lSMAECchoUpStr/6 jtPeV5CMuyzrRsX2MGFLyH0sqXZFN09XGt/NGA81tHaCcdhQW/M4QlWjTRCqueen amuXi9wCzIVKmimri6TqhVGHxusouhSgM4IqYXmvxTVbmz3fIEGdtNl5fuqyo+MA OADwjL2wNRKR4+DFY2tamtVSmi2PtA== =NFQZ -----END PGP SIGNATURE-----help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52C90CB8-76DD-47EB-8C30-435920FF0B79>