Date: Sun, 08 Aug 2004 16:09:54 +0200 From: Roland van Laar <the_mip_rvl@myrealbox.com> To: Mike <mspam@www.ideaway.net> Cc: freebsd-current@freebsd.org Subject: Re: "BTX Halted" on Toshiba Portege 3010 Message-ID: <41163432.2060905@myrealbox.com> In-Reply-To: <20040807080046.M43382@www.ideaway.net> References: <20040807080046.M43382@www.ideaway.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Mike wrote: >Taking a hard drive from a working install of almost -current >and placing it into the Portege 3010 shows a dump of reg >values and the message "BTX Halted". This happens shortly >after typing /boot/loader <enter> at the boot: prompt; >moments later the machine reboots. >Googling points at playing with DMA/PIO options in the BIOS >until the message goes away - there are no such options in >the Portege's BIOS, but I've pretty much tweaked every >setting that there is, and the results are exactly the same. >I've also found some posts of freebsd 3.x supposedly working >with this machine. So... was something broken along the >way, was support removed, or is there something I am missing >which will allow me to boot this machine into 5-current? >Mike > > > I had a 3020 which died 2 months ago, haven't had a current on it since februari, so at least 5.2.1 should work fine. regards, Roland ps. This is more an e-mail for mobile@
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41163432.2060905>