Date: Thu, 24 Nov 2011 17:47:49 +0100 From: bsd <bsd@todoo.biz> To: Liste FreeBSD <freebsd-questions@freebsd.org> Subject: Problem with uart interfaces Message-ID: <E622F877-69D5-4597-88A6-71AC3DFACA6F@todoo.biz>
next in thread | raw e-mail | index | archive | help
Hello,=20 I have a serious problem with LAN bypass.=20 I am configuring a new appliance which embeddeds a LAN bypass on four = ethernet cards.=20 When the system boots, it freezes at the stage of uart interface = detection :=20 > Consoles: internal video/keyboard serial port > BIOS drive C: is disk0 > BIOS 631kB/2085632kB available memory >=20 > FreeBSD/i386 bootstrap loader, Revision 1.1 > (root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org, Sat Sep 3 19:36:15 = EDT 2011) > Loading /boot/defaults/loader.conf > /boot/kernel/kernel text=3D0x8a1d58 data=3D0x3c9e94+0x9b6a0 = syms=3D[0x4+0x94100+0x4+0xcaf47] > \ >=20 >=20 > ZDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD? > 3 3 > 3 3 > 3 3 > 3 Welcome to pfSense! 3 > 3 3 ______ > 3 3 / \ > 3 1. Boot pfSense [default] 3 _____/ f \ > 3 2. Boot pfSense with ACPI disabled 3 / \ / > 3 3. Boot pfSense using USB device 3 / p \______/ = Sense > 3 4. Boot pfSense in Safe Mode 3 \ / \ > 3 5. Boot pfSense in single user mode 3 \_____/ \ > 3 6. Boot pfSense with verbose logging 3 \ / > 3 7. Escape to loader prompt 3 \______/ > 3 8. Reboot 3 > 3 3 > 3 3 > 3 3 > 3 Select option, [Enter] for default 3 > 3 or [Space] to pause timer 0 3 > @DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDY >=20 >=20 > Copyright (c) 1992-2010 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 > The Regents of the University of California. All rights = reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 8.1-RELEASE-p4 #0: Sat Sep 3 20:00:14 EDT 2011 > = root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj./usr/pfSensesrc/sr= c/sys/pfSense_wrap.8.i386 i386 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1795.51-MHz 686-class = CPU) > Origin =3D "GenuineIntel" Id =3D 0x106ca Family =3D 6 Model =3D = 1c Stepping =3D 10 > = Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > = Features2=3D0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE= > > AMD Features=3D0x20100000<NX,LM> > AMD Features2=3D0x1<LAHF> > TSC: P-state invariant > real memory =3D 2147483648 (2048 MB) > avail memory =3D 2076377088 (1980 MB) > ACPI APIC Table: <PTLTD APIC > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads > cpu0 (BSP): APIC ID: 0 > cpu1 (AP/HT): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP/HT): APIC ID: 3 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device = polling > wlan: mac acl policy registered > ipw_bss: You need to read the LICENSE file in = /usr/share/doc/legal/intel_ipw/. > ipw_bss: If you agree with the license, set = legal.intel_ipw.license_ack=3D1 in /boot/loader.conf. > module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0710010, 0) error 1 > ipw_ibss: You need to read the LICENSE file in = /usr/share/doc/legal/intel_ipw/. > ipw_ibss: If you agree with the license, set = legal.intel_ipw.license_ack=3D1 in /boot/loader.conf. > module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07100b0, 0) error 1 > wpi: You need to read the LICENSE file in = /usr/share/doc/legal/intel_wpi/. > wpi: If you agree with the license, set legal.intel_wpi.license_ack=3D1 = in /boot/loader.conf. > module_register_init: MOD_LOAD (wpi_fw, 0xc0883050, 0) error 1 > ipw_monitor: You need to read the LICENSE file in = /usr/share/doc/legal/intel_ipw/. > ipw_monitor: If you agree with the license, set = legal.intel_ipw.license_ack=3D1 in /boot/loader.conf. > module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0710150, 0) error 1 > cryptosoft0: <software crypto> on motherboard > padlock0: No ACE support. > acpi0: <PTLTD XSDT> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > vgapci0: <VGA-compatible display> port 0x1c10-0x1c17 mem = 0xf0700000-0xf077ffff,0xd0000000-0xdfffffff,0xf0000000-0xf00fffff irq 16 = at device 2.0 on pci0 > vgapci1: <VGA-compatible display> mem 0xf0780000-0xf07fffff at device = 2.1 on pci0 > uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1820-0x183f = irq 16 at device 26.0 on pci0 > uhci0: [ITHREAD] > usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0 > uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1840-0x185f = irq 21 at device 26.1 on pci0 > uhci1: [ITHREAD] > usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1 > ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem = 0xf0a01000-0xf0a013ff irq 18 at device 26.7 on pci0 > ehci0: [ITHREAD] > usbus2: EHCI version 1.0 > usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci5: <ACPI PCI bus> on pcib1 > em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x2000-0x201f = mem 0xf0120000-0xf013ffff,0xf0100000-0xf0103fff irq 16 at device 0.0 on = pci5 > em0: Using an MSI interrupt > em0: [FILTER] > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 > pci7: <ACPI PCI bus> on pcib2 > em1: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x3000-0x301f = mem 0xf0200000-0xf021ffff,0xf0220000-0xf0223fff irq 17 at device 0.0 on = pci7 > em1: Using an MSI interrupt > em1: [FILTER] > pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 > pci9: <ACPI PCI bus> on pcib3 > em2: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x4000-0x401f = mem 0xf0320000-0xf033ffff,0xf0300000-0xf0303fff irq 18 at device 0.0 on = pci9 > em2: Using an MSI interrupt > em2: [FILTER] > pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 > pci11: <ACPI PCI bus> on pcib4 > em3: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x5000-0x501f = mem 0xf0400000-0xf041ffff,0xf0420000-0xf0423fff irq 19 at device 0.0 on = pci11 > em3: Using an MSI interrupt > em3: [FILTER] > pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 > pci12: <ACPI PCI bus> on pcib5 > em4: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x6000-0x601f = mem 0xf0520000-0xf053ffff,0xf0500000-0xf0503fff irq 16 at device 0.0 on = pci12 > em4: Using an MSI interrupt > em4: [FILTER] > pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 > pci13: <ACPI PCI bus> on pcib6 > em5: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x7000-0x701f = mem 0xf0600000-0xf061ffff,0xf0620000-0xf0623fff irq 17 at device 0.0 on = pci13 > em5: Using an MSI interrupt > em5: [FILTER] > uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x1860-0x187f = irq 23 at device 29.0 on pci0 > uhci2: [ITHREAD] > usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2 > uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x1880-0x189f = irq 19 at device 29.1 on pci0 > uhci3: [ITHREAD] > usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3 > uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18a0-0x18bf = irq 18 at device 29.2 on pci0 > uhci4: [ITHREAD] > usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4 > ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem = 0xf0a01400-0xf0a017ff irq 23 at device 29.7 on pci0 > ehci1: [ITHREAD] > usbus6: EHCI version 1.0 > usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1 > pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci17: <ACPI PCI bus> on pcib7 > em6: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port = 0x8000-0x803f mem 0xf0b20000-0xf0b3ffff,0xf0b00000-0xf0b1ffff irq 18 at = device 6.0 on pci17 > em6: Memory Access and/or Bus Master bits were not set! > em6: [FILTER] > em7: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port = 0x8040-0x807f mem 0xf0b60000-0xf0b7ffff,0xf0b40000-0xf0b5ffff irq 19 at = device 7.0 on pci17 > em7: Memory Access and/or Bus Master bits were not set! > em7: [FILTER] > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH8M UDMA100 controller> port = 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > atapci1: <Intel ICH8M SATA300 controller> port = 0x1c40-0x1c47,0x1c34-0x1c37,0x1c38-0x1c3f,0x1c30-0x1c33,0x1c00-0x1c0f,0x18= f0-0x18ff irq 19 at device 31.2 on pci0 > atapci1: [ITHREAD] > ata2: <ATA channel 0> on atapci1 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci1 > ata3: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > pci0: <dasp> at device 31.6 (no driver attached) > acpi_tz0: <Thermal Zone> on acpi0 > ACPI Warning for \_TZ_.TZ01._AL0: Return Package type mismatch at = index 0 - found [NULL Object Descriptor], expected Reference = (20100331/nspredef-1197) > acpi_button0: <Power Button> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on = acpi0 > uart0: [FILTER] > uart0: console (9600,n,8,1) > uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 > uart1: [FILTER] > uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 on acpi0 > uart2: [FILTER] > uart3: <16550 or compatible> port 0x2e8-0x2ef irq 7 on acpi0 > uart3: [FILTER] After nothing, the system is frozen with no option to act on It.=20 Reboot necessary !=20 I am using pfSense v.2.0-Release which is based on 8.1 version of FBSD.=20= =20 Hardware is as follow :=20 Processor: =E2=80=A7 Intel Dual- Core D525 1.8 GHz Processor Memory: =E2=80=A7 2x 204- pin SO-DIMM sockets, up to 4GB of DDR-3 Ethernet: =E2=80=A7 6x PCI- E I/F LAN ports (Intel 82583 v GbE controller) =E2=80=A7 2x PCI I/F LAN ports ( Intel 82541 PI GbE controller) LAN By-Pass Function: =E2=80=A7 2x pairs of PCI-E GbE ports support =E2=80=A7 By- pass Enable/ Disable option =E2=80=A7 By- pass Preset option =E2=80=A7 By- pass Setup option Any advise on how to solve this issue will be=E2=80=A6 most welcome !!!=20= Thanks=20 = =E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2= =80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80= =93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93= =E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2= =80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80= =93=E2=80=93=E2=80=93=E2=80=93=E2=80=93 ---------> Gr=C3=A9gory Bernard Director <--------- ---------------> www.osnet.eu <--------------- --> Your provider of OpenSource appliances <-- = =E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2= =80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80= =93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93= =E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2= =80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80= =93=E2=80=93=E2=80=93=E2=80=93=E2=80=93 OSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetO
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E622F877-69D5-4597-88A6-71AC3DFACA6F>