Date: Wed, 26 Dec 2001 15:15:26 -0700 From: Matthew Gilbert <agilbertm@earthlink.net> To: Matthew Dillon <dillon@apollo.backplane.com> Cc: <freebsd-stable@FreeBSD.ORG>, <freebsd-hackers@FreeBSD.ORG> Subject: Re: 4.4-STABLE crashes - suspects new ata-driver over wd-drivers Message-ID: <E16JMEx-0000FM-00@scaup.prod.itd.earthlink.net> In-Reply-To: <200112262015.fBQKFHi47418@apollo.backplane.com> References: <200112202333.fBKNXZ679605@apollo.backplane.com> <200112261924.fBQJORF47150@apollo.backplane.com> <200112262015.fBQKFHi47418@apollo.backplane.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> So, general question to everyone having crashes during heavy
> IDE workloads: Please post your /var/run/dmesg.boot
> output.
This is after a second reboot (that is why the disks come up clean). -Matt
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-PRERELEASE #0: Sat Dec 22 12:13:13 MST 2001
root@string:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (736.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 536870912 (524288K bytes)
config> en sio3
config> po sio3 0x2e8
config> ir sio3 9
config> f sio3 0
config> en sio2
config> po sio2 0x3e8
config> ir sio2 5
config> f sio2 0
config> q
avail memory = 518303744 (506156K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc045c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc045c09c.
Preloaded elf module "agp.ko" at 0xc045c0ec.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdb80
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 9 -> irq 2
IOAPIC #0 intpin 11 -> irq 9
pci0: <PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd0000000-0xd3ffffff
at device 0.0 on pci0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 2 at device 7.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 2 at device 7.3 on
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip0: <VIA 82C686 ACPI interface> at device 7.4 on pci0
pcm0: <AudioPCI ES1373-8> port 0xe000-0xe03f irq 9 at device 9.0 on pci0
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 11.0 irq 2
bktr0: <BrookTree 848A> mem 0xdc101000-0xdc101fff irq 10 at device 12.0 on
pci0
bktr0: Pinnacle/Miro TV, Temic NTSC tuner.
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xe400-0xe41f mem
0xdc000000-0xdc0fffff,0xdc100000-0xdc100fff irq 9 at device 13.0 on pci0
fxp0: Ethernet address 00:a0:c9:a3:a6:4f
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: configured irq 5 not in bitmap of probed irqs 0
sio3: configured irq 9 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIF
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E16JMEx-0000FM-00>