Date: Tue, 26 Aug 2008 20:03:35 -0700 From: Sean Bruno <sbruno@miralink.com> To: Dieter <freebsd@sopwith.solgatos.com> Cc: freebsd-firewire@freebsd.org Subject: Re: Something broke :-( Re: fwcontrol update Message-ID: <48B4C407.9010900@miralink.com> In-Reply-To: <200808270031.AAA13884@sopwith.solgatos.com> References: <200808270031.AAA13884@sopwith.solgatos.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Dieter wrote: >>>> Can you run a live linux distro(unbuntu or knoppix) and see if linux can >>>> "reset" >>>> your NEC f/w controller? >>>> > > What does penguinix call firewire? > > (none):~ # dmesg | grep -i fire > (none):~ # dmesg | grep -i fw > (none):~ # dmesg | grep -i 1394 > (none):~ # dmesg | grep -i link > audit: initializing netlink socket (disabled) > eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] > > (none):~ # man -k fire > fire: nothing appropriate. > (none):~ # man -k fw > fw: nothing appropriate. > (none):~ # man -k 1394 > 1394: nothing appropriate. > (none):~ # man -k link > link: nothing appropriate. > > I was hoping that you could boot linux, and then plugin your camera and see what the output of dmesg and /var/log/messages has to say. > Anyway, due to a firmware bug I ended up having to power cycle > the machine. (switched off at the P/S, so even 5V standby should > have been off) > > I was expecting the power cycle to completely reset the NEC board. > But it is not back to normal. I no longer get the spewage from a > constant series of bus resets, but fwcontrol -R still doesn't work. > > fwcontrol_prev is from March, and used to do -R successfully. > > fwcontrol_prev -R /dv0/test_prev_camera.dv > Detected DV format on input. > (EAGAIN) > (EAGAIN) > (EAGAIN) > > Is there any chance that you overwrote fwcontrol_prev with my patched version? Could you pull fwcontrol from src and recompile just to check? -- Sean Bruno MiraLink Corporation 6015 NE 80th Ave, Ste 100 Portland, OR 97218 Cell 503-358-6832 Phone 503-621-5143 Fax 503-621-5199 MSN: sbruno@miralink.com Google: seanwbruno@gmail.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48B4C407.9010900>