Date: Sun, 5 Aug 2018 11:14:13 +0000 (UTC) From: Vladimir Kondratyev <wulf@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r337348 - in head: share/man/man4 sys/dev/usb/input sys/modules/usb/uep Message-ID: <201808051114.w75BED7N061975@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: wulf Date: Sun Aug 5 11:14:13 2018 New Revision: 337348 URL: https://svnweb.freebsd.org/changeset/base/337348 Log: uep(4): add evdev support To compile this driver with evdev support enabled, place following lines into the kernel configuration file: options EVDEV_SUPPORT device evdev Note: Native and evdev modes are mutually exclusive. Reviewed by: gonzo, wblock (docs) MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D11156 Modified: head/share/man/man4/uep.4 head/sys/dev/usb/input/uep.c head/sys/modules/usb/uep/Makefile Modified: head/share/man/man4/uep.4 ============================================================================== --- head/share/man/man4/uep.4 Sun Aug 5 06:16:36 2018 (r337347) +++ head/share/man/man4/uep.4 Sun Aug 5 11:14:13 2018 (r337348) @@ -24,7 +24,7 @@ .\" .\" $FreeBSD$ .\" -.Dd May 25, 2010 +.Dd August 5, 2018 .Dt UEP 4 .Os .Sh NAME @@ -44,28 +44,46 @@ module at boot time, place the following line in .Bd -literal -offset indent uep_load="YES" .Ed +.Pp +To compile this driver with evdev support enabled, place the +following lines into the kernel configuration file: +.Bd -ragged -offset indent +.Cd "options EVDEV_SUPPORT" +.Cd "device evdev" +.Ed .Sh DESCRIPTION The .Nm driver provides support for the eGalax onscreen touch panels. .Pp -The driver is stub. -It just probes and attaches to USB device, creates device entry +The driver is a stub. +It just probes and attaches to USB device, creates a device entry and feeds reassembled packets from the hardware to it. +Depending on compile-time kernel options it supports either native +or evdev operation modes. .Pp -To get mouse working in -.Xr X 7 , -one needs to install +To get the mouse working in +.Xr X 7 +in native mode, install .Pa ports/x11-drivers/xf86-input-egalax . +.Pp +To get the mouse working in +.Xr X 7 +in evdev mode, install +.Pa ports/x11-drivers/xf86-input-evdev . .Sh FILES .Nm -creates a blocking pseudo\-device file, -.Pa /dev/uep0 . +creates a blocking pseudo-device file, +.Pa /dev/uep0 +in native mode or +.Pa /dev/input/eventN +in evdev mode. .Sh SEE ALSO .Xr usb 4 , .Xr loader.conf 5 , .Xr xorg.conf 5 Pq Pa ports/x11/xorg , -.Xr egalax 4 Pq Pa ports/x11-drivers/xf86-input-egalax . +.Xr egalax 4 Pq Pa ports/x11-drivers/xf86-input-egalax , +.Xr evdev 4 Pq Pa ports/x11-drivers/xf86-input-evdev . .Sh AUTHORS .An -nosplit The @@ -74,6 +92,8 @@ driver was written by .An Gleb Smirnoff Aq Mt glebius@FreeBSD.org . .Sh BUGS .Nm -can't act like +cannot act like .Xr sysmouse 4 , -since the latter does not support absolute motion events. +as +.Xr sysmouse 4 +does not support absolute motion events. Modified: head/sys/dev/usb/input/uep.c ============================================================================== --- head/sys/dev/usb/input/uep.c Sun Aug 5 06:16:36 2018 (r337347) +++ head/sys/dev/usb/input/uep.c Sun Aug 5 11:14:13 2018 (r337348) @@ -32,6 +32,8 @@ * http://www.eeti.com.tw/pdf/Software%20Programming%20Guide_v2.0.pdf */ +#include "opt_evdev.h" + #include <sys/param.h> #include <sys/bus.h> #include <sys/callout.h> @@ -49,9 +51,14 @@ #include <dev/usb/usbhid.h> #include "usbdevs.h" +#ifdef EVDEV_SUPPORT +#include <dev/evdev/input.h> +#include <dev/evdev/evdev.h> +#else #include <sys/ioccom.h> #include <sys/fcntl.h> #include <sys/tty.h> +#endif #define USB_DEBUG_VAR uep_debug #include <dev/usb/usb_debug.h> @@ -90,11 +97,15 @@ struct uep_softc { struct mtx mtx; struct usb_xfer *xfer[UEP_N_TRANSFER]; +#ifdef EVDEV_SUPPORT + struct evdev_dev *evdev; +#else struct usb_fifo_sc fifo; u_int pollrate; u_int state; #define UEP_ENABLED 0x01 +#endif /* Reassembling buffer. */ u_char buf[UEP_PACKET_LEN_MAX]; @@ -107,6 +118,18 @@ static device_probe_t uep_probe; static device_attach_t uep_attach; static device_detach_t uep_detach; +#ifdef EVDEV_SUPPORT + +static evdev_open_t uep_ev_open; +static evdev_close_t uep_ev_close; + +static const struct evdev_methods uep_evdev_methods = { + .ev_open = &uep_ev_open, + .ev_close = &uep_ev_close, +}; + +#else /* !EVDEV_SUPPORT */ + static usb_fifo_cmd_t uep_start_read; static usb_fifo_cmd_t uep_stop_read; static usb_fifo_open_t uep_open; @@ -121,6 +144,7 @@ static struct usb_fifo_methods uep_fifo_methods = { .f_stop_read = &uep_stop_read, .basename[0] = "uep", }; +#endif /* !EVDEV_SUPPORT */ static int get_pkt_len(u_char *buf) @@ -154,6 +178,9 @@ static void uep_process_pkt(struct uep_softc *sc, u_char *buf) { int32_t x, y; +#ifdef EVDEV_SUPPORT + int touch; +#endif if ((buf[0] & 0xFE) != 0x80) { DPRINTF("bad input packet format 0x%.2x\n", buf[0]); @@ -186,7 +213,17 @@ uep_process_pkt(struct uep_softc *sc, u_char *buf) DPRINTFN(2, "x %u y %u\n", x, y); +#ifdef EVDEV_SUPPORT + touch = buf[0] & (1 << 0); + if (touch) { + evdev_push_abs(sc->evdev, ABS_X, x); + evdev_push_abs(sc->evdev, ABS_Y, y); + } + evdev_push_key(sc->evdev, BTN_TOUCH, touch); + evdev_sync(sc->evdev); +#else uep_put_queue(sc, buf); +#endif } static void @@ -261,12 +298,13 @@ uep_intr_callback(struct usb_xfer *xfer, usb_error_t e } case USB_ST_SETUP: tr_setup: +#ifndef EVDEV_SUPPORT /* check if we can put more data into the FIFO */ - if (usb_fifo_put_bytes_max(sc->fifo.fp[USB_FIFO_RX]) != 0) { - usbd_xfer_set_frame_len(xfer, 0, - usbd_xfer_max_len(xfer)); - usbd_transfer_submit(xfer); - } + if (usb_fifo_put_bytes_max(sc->fifo.fp[USB_FIFO_RX]) == 0) + break; +#endif + usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); + usbd_transfer_submit(xfer); break; default: @@ -330,6 +368,28 @@ uep_attach(device_t dev) goto detach; } +#ifdef EVDEV_SUPPORT + sc->evdev = evdev_alloc(); + evdev_set_name(sc->evdev, device_get_desc(dev)); + evdev_set_phys(sc->evdev, device_get_nameunit(dev)); + evdev_set_id(sc->evdev, BUS_USB, uaa->info.idVendor, + uaa->info.idProduct, 0); + evdev_set_serial(sc->evdev, usb_get_serial(uaa->device)); + evdev_set_methods(sc->evdev, sc, &uep_evdev_methods); + evdev_support_prop(sc->evdev, INPUT_PROP_DIRECT); + evdev_support_event(sc->evdev, EV_SYN); + evdev_support_event(sc->evdev, EV_ABS); + evdev_support_event(sc->evdev, EV_KEY); + evdev_support_key(sc->evdev, BTN_TOUCH); + evdev_support_abs(sc->evdev, ABS_X, 0, 0, UEP_MAX_X, 0, 0, 0); + evdev_support_abs(sc->evdev, ABS_Y, 0, 0, UEP_MAX_Y, 0, 0, 0); + + error = evdev_register_mtx(sc->evdev, &sc->mtx); + if (error) { + DPRINTF("evdev_register_mtx error=%s\n", usbd_errstr(error)); + goto detach; + } +#else /* !EVDEV_SUPPORT */ error = usb_fifo_attach(uaa->device, sc, &sc->mtx, &uep_fifo_methods, &sc->fifo, device_get_unit(dev), -1, uaa->info.bIfaceIndex, UID_ROOT, GID_OPERATOR, 0644); @@ -338,6 +398,7 @@ uep_attach(device_t dev) DPRINTF("usb_fifo_attach error=%s\n", usbd_errstr(error)); goto detach; } +#endif /* !EVDEV_SUPPORT */ sc->buf_len = 0; @@ -354,7 +415,11 @@ uep_detach(device_t dev) { struct uep_softc *sc = device_get_softc(dev); +#ifdef EVDEV_SUPPORT + evdev_free(sc->evdev); +#else usb_fifo_detach(&sc->fifo); +#endif usbd_transfer_unsetup(sc->xfer, UEP_N_TRANSFER); @@ -363,7 +428,31 @@ uep_detach(device_t dev) return (0); } +#ifdef EVDEV_SUPPORT + static void +uep_ev_close(struct evdev_dev *evdev, void *ev_softc) +{ + struct uep_softc *sc = (struct uep_softc *)ev_softc; + + mtx_assert(&sc->mtx, MA_OWNED); + usbd_transfer_stop(sc->xfer[UEP_INTR_DT]); +} + +static int +uep_ev_open(struct evdev_dev *evdev, void *ev_softc) +{ + struct uep_softc *sc = (struct uep_softc *)ev_softc; + + mtx_assert(&sc->mtx, MA_OWNED); + usbd_transfer_start(sc->xfer[UEP_INTR_DT]); + + return (0); +} + +#else /* !EVDEV_SUPPORT */ + +static void uep_start_read(struct usb_fifo *fifo) { struct uep_softc *sc = usb_fifo_softc(fifo); @@ -424,6 +513,7 @@ uep_close(struct usb_fifo *fifo, int fflags) usb_fifo_free_buffer(fifo); } } +#endif /* !EVDEV_SUPPORT */ static devclass_t uep_devclass; @@ -442,5 +532,8 @@ static driver_t uep_driver = { DRIVER_MODULE(uep, uhub, uep_driver, uep_devclass, NULL, NULL); MODULE_DEPEND(uep, usb, 1, 1, 1); +#ifdef EVDEV_SUPPORT +MODULE_DEPEND(uep, evdev, 1, 1, 1); +#endif MODULE_VERSION(uep, 1); USB_PNP_HOST_INFO(uep_devs); Modified: head/sys/modules/usb/uep/Makefile ============================================================================== --- head/sys/modules/usb/uep/Makefile Sun Aug 5 06:16:36 2018 (r337347) +++ head/sys/modules/usb/uep/Makefile Sun Aug 5 11:14:13 2018 (r337348) @@ -5,7 +5,7 @@ S= ${SRCTOP}/sys .PATH: $S/dev/usb/input KMOD= uep -SRCS= opt_bus.h opt_usb.h device_if.h bus_if.h usb_if.h vnode_if.h usbdevs.h \ - uep.c +SRCS= opt_bus.h opt_evdev.h opt_usb.h device_if.h bus_if.h usb_if.h \ + vnode_if.h usbdevs.h uep.c .include <bsd.kmod.mk>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201808051114.w75BED7N061975>