Date: Wed, 10 Dec 2003 15:53:34 +0100 (CET) From: "Oliver Velten" <ov@baily.de> To: freebsd-mobile@FreeBSD.ORG Subject: Proxim Harmony Installation Problems Message-ID: <3453.62.245.233.95.1071068014.squirrel@intranet.aguntum.dyndns.org>
next in thread | raw e-mail | index | archive | help
Hi!
I bought a Proxim Harmony PCI 802.11b and tried to install it under
FreeBSD 4.9 .
The Problem ist that FreeBSD does not create a wi Interface when it comes
up. The Card has a PCI to PCMCIA bridge which is recognized. I have built
in the Kernel the wi device and pccardd support.
Here some output of several Programs:
> root@zeus:~> scanpci
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1022 device 0x7006
Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller
pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x1022 device 0x7007
Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge
pci bus 0x0000 cardnum 0x07 function 0x00: vendor 0x1022 device 0x7408
Advanced Micro Devices [AMD] AMD-756 [Viper] ISA
pci bus 0x0000 cardnum 0x07 function 0x01: vendor 0x1022 device 0x7409
Advanced Micro Devices [AMD] AMD-756 [Viper] IDE
pci bus 0x0000 cardnum 0x07 function 0x03: vendor 0x1022 device 0x740b
Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI
pci bus 0x0000 cardnum 0x07 function 0x04: vendor 0x1022 device 0x740c
Advanced Micro Devices [AMD] AMD-756 [Viper] USB
pci bus 0x0000 cardnum 0x08 function 0x00: vendor 0x10b7 device 0x9200
3Com Corporation 3c905C-TX/TX-M [Tornado]
pci bus 0x0000 cardnum 0x09 function 0x00: vendor 0x9005 device 0x0081
Adaptec AIC-7892B U160/m
pci bus 0x0000 cardnum 0x0a function 0x00: vendor 0x10b7 device 0x7646
3Com Corporation 3cSOHO100-TX Hurricane
pci bus 0x0000 cardnum 0x0b function 0x00: vendor 0x1013 device 0x1100
Cirrus Logic CL 6729
pci bus 0x0001 cardnum 0x05 function 0x00: vendor 0x10de device 0x0020
nVidia Corporation NV4 [RIVA TNT]
root@zeus:~>
> root@zeus:~> pccardc dumpcis
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 4
000: 67 5a 08 ff
Attribute memory device information:
Device number 1, type SRAM, WPS = OFF
Speed = 5.0 x 100 ns, Memory block size = 512b, 2 units
Tuple #3, code = 0x1d (Other conditions for attribute memory), length = 5
000: 03 67 5a 08 ff
(MWAIT) (3V card)
Tuple #4, code = 0x15 (Version 1 info), length = 80
000: 05 00 50 52 4f 58 49 4d 00 4c 41 4e 20 50 43 49
010: 20 43 41 52 44 20 48 41 52 4d 4f 4e 59 20 38 30
020: 32 31 31 42 00 00 00 00 00 00 00 00 00 00 00 00
030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
Version = 5.0, Manuf = [PROXIM], card vers = [LAN PCI CARD HARMONY
80211B]
Addit. info = [],[]
Tuple #5, code = 0x20 (Manufacturer ID), length = 4
000: 26 01 02 00
PCMCIA ID = 0x126, OEM ID = 0x2
Tuple #6, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #7, code = 0x22 (Functional EXT), length = 2
000: 01 07
Network technology: Wireless
Tuple #8, code = 0x22 (Functional EXT), length = 5
000: 02 40 42 0f 00
Network speed: 1 Mb/sec
Tuple #9, code = 0x22 (Functional EXT), length = 5
000: 02 80 84 1e 00
Network speed: 2 Mb/sec
Tuple #10, code = 0x22 (Functional EXT), length = 5
000: 02 60 ec 53 00
Network speed: 5 Mb/sec
Tuple #11, code = 0x22 (Functional EXT), length = 5
000: 02 c0 d8 a7 00
Network speed: 11 Mb/sec
Tuple #12, code = 0x22 (Functional EXT), length = 2
000: 03 07
Network media: 2.4 GHz
Tuple #13, code = 0x22 (Functional EXT), length = 8
000: 04 06 00 00 f0 64 00 00
Network node ID: 00 00 f0 64 00 00
Tuple #14, code = 0x22 (Functional EXT), length = 2
000: 05 01
Network connector: closed connector standard
Tuple #15, code = 0x1a (Configuration map), length = 7
000: 03 01 e0 03 00 00 01
Reg len = 4, config register addr = 0x3e0, last config = 0x1
Registers: X-------
Tuple #16, code = 0x1b (Configuration entry), length = 13
000: c1 01 09 77 b5 1e 35 b5 3c 36 36 05 46
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Minimum operating supply voltage: 3 x 1V
Maximum operating supply voltage: 3 x 1V, ext = 0x3c
Max current average over 1 second: 3 x 100mA
Max current average over 10 ms: 3 x 100mA
Power down supply current: 1 x 10mA
Card decodes 6 address lines, limited 8/16 Bit I/O
Tuple #17, code = 0xff (Terminator), length = 0
2 slots found
root@zeus:~>
> root@zeus:~> less /boot/loader.conf
userconfig_script_load="YES"
autoboot_delay="2"
hw.pcic.pd6729_intr_path="2"
root@zeus:~>
> root@zeus:~> ifconfig -a
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3<rxcsum,txcsum>
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::204:76ff:fe8d:58d3%xl0 prefixlen 64 scopeid 0x1
ether 00:04:76:8d:58:d3
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
xl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3<rxcsum,txcsum>
inet 10.0.0.1 netmask 0xff000000 broadcast 10.255.255.255
inet6 fe80::204:76ff:fe8c:f7d7%xl1 prefixlen 64 scopeid 0x2
ether 00:04:76:8c:f7:d7
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
ipr0: flags=2810<POINTOPOINT,SIMPLEX,LINK1> mtu 1500
ipr1: flags=2810<POINTOPOINT,SIMPLEX,LINK1> mtu 1500
ipr2: flags=2810<POINTOPOINT,SIMPLEX,LINK1> mtu 1500
ipr3: flags=2810<POINTOPOINT,SIMPLEX,LINK1> mtu 1500
isp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ether 00:00:00:00:00:00
isp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ether 00:00:00:00:00:00
isp2: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ether 00:00:00:00:00:00
isp3: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ether 00:00:00:00:00:00
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
inet 62.245.233.95 --> 62.245.233.1 netmask 0xffffffff
Opened by PID 59598
root@zeus:~>
If someone has an idea please let me know.
Regards,
Oliver
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi? <3453.62.245.233.95.1071068014.squirrel>