Date: Sat, 9 Jan 2010 11:39:32 -0600 From: Adam Vande More <amvandemore@gmail.com> To: Marcel Moolenaar <xcllnt@mac.com> Cc: amd64@freebsd.org, stable@freebsd.org Subject: Re: 8-stable/amd64: ATA: hard hang when doing "burncd fixate" Message-ID: <6201873e1001090939v701306bj6b87378ed51c66a@mail.gmail.com> In-Reply-To: <70915503-440B-400B-BA85-F9EAE5C055FB@mac.com> References: <70915503-440B-400B-BA85-F9EAE5C055FB@mac.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Jan 9, 2010 at 11:14 AM, Marcel Moolenaar <xcllnt@mac.com> wrote: > All, > > I get a hard hang on a TYAN Thunder K8S with a single Opteron > mounted: > > : > CPU: AMD Opteron(tm) Processor 246 (1991.62-MHz K8-class CPU) > Origin = "AuthenticAMD" Id = 0xf58 Stepping = 8 > > Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> > AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!> > real memory = 1073741824 (1024 MB) > avail memory = 1023348736 (975 MB) > ACPI APIC Table: <A M I OEMAPIC > > : > atapci0: <SiI 3114 SATA150 controller> port > 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xac00-0xac03,0xa880-0xa88f mem > 0xfeafec00-0xfeafefff irq 19 at device 5.0 on pci3 > atapci0: [ITHREAD] > ata2: <ATA channel 0> on atapci0 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci0 > ata3: [ITHREAD] > ata4: <ATA channel 2> on atapci0 > ata4: [ITHREAD] > ata5: <ATA channel 3> on atapci0 > ata5: [ITHREAD] > : > atapci1: <AMD 8111 UDMA133 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0 > ata0: <ATA channel 0> on atapci1 > ata0: [ITHREAD] > ata1: <ATA channel 1> on atapci1 > ata1: [ITHREAD] > : > atapci2: <Marvell 88SX6081 SATA300 controller> port 0x8800-0x88ff mem > 0xfc800000-0xfc8fffff irq 26 at device 2.0 on pci2 > atapci2: [ITHREAD] > ata6: <ATA channel 0> on atapci2 > ata6: [ITHREAD] > ata7: <ATA channel 1> on atapci2 > ata7: [ITHREAD] > ata8: <ATA channel 2> on atapci2 > ata8: [ITHREAD] > ata9: <ATA channel 3> on atapci2 > ata9: [ITHREAD] > ata10: <ATA channel 4> on atapci2 > ata10: [ITHREAD] > ata11: <ATA channel 5> on atapci2 > ata11: [ITHREAD] > ata12: <ATA channel 6> on atapci2 > ata12: [ITHREAD] > ata13: <ATA channel 7> on atapci2 > ata13: [ITHREAD] > : > acd0: DVDR <NEC DVD+/-RW ND-6500A/2.22> at ata1-master UDMA33 > ad0: 476940MB <Maxtor 7H500F0 HA431DN0> at ata2-master UDMA100 SATA 1.5Gb/s > ad1: 476940MB <Maxtor 7H500F0 HA431DN0> at ata3-master UDMA100 SATA 1.5Gb/s > ad2: 1430799MB <Seagate ST31500341AS SD17> at ata6-master UDMA100 SATA > 3Gb/s > ad3: 1430799MB <Seagate ST31500341AS CC1H> at ata7-master UDMA100 SATA > 3Gb/s > ad4: 476940MB <MAXTOR STM3500630AS 3.AAE> at ata12-master UDMA100 SATA > 1.5Gb/s > : > > Writing an image is fine using: > ns1% sudo burncd -f /dev/acd0 data > FreeBSD-9.0-CURRENT-201001-ia64-bootonly.iso > > Fixating the CD is causing the hard hang: > ns1% sudo burncd -f /dev/acd0 fixate > fixating CD, please wait.. > *hard hang* > > There's nothing in the console and interrupts are all > masked. A power-cycle is the only thing that can be done. > > Is this a known issue? > > -- > Marcel Moolenaar > I believe the standard advice is to be using atapicam and cdrecord w/ ahci. -- Adam Vande More
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6201873e1001090939v701306bj6b87378ed51c66a>