Date: Tue, 15 May 2001 16:58:00 -0400 From: Mathew Kanner <mat@cnd.mcgill.ca> To: freebsd-smp@freebsd.org Subject: Success: DELL POWEREDGE 6450 Message-ID: <20010515165800.A62545@cnd.mcgill.ca>
next in thread | raw e-mail | index | archive | help
--YZ5djTAD1cGYuMQK
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hello Group,
Just a note to report that I've just had a great experience
with FreeBSD 4.3 and a Dell PowerEdge 6450 Quad Pentium Xeon machine.
Much to my surprise, I had the machine out of the box and installed
with an SMP kernel within a half an hour. I did a floppy/network
install, recompiled the kernel and added a local package to config for
our network. Not a single problem or glitch.
I've attached a dmesg for anybody who's curious.
Many Thanks,
--Mat
--YZ5djTAD1cGYuMQK
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.cube"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Tue May 15 11:25:38 GMT 2001
root@cube.cnd.mcgill.ca:/usr/src/sys/compile/CUBE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (699.29-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6a1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2147475456 (2097144K bytes)
avail memory = 2087964672 (2039028K bytes)
Changing APIC ID for IO APIC #0 from 0 to 4 on chip
Changing APIC ID for IO APIC #1 from 0 to 5 on chip
Programming 16 pins in IOAPIC #0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 3, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu2 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu3 (AP): apic id: 2, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc03de000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib3: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 7 -> irq 2
IOAPIC #1 intpin 9 -> irq 5
pci3: <PCI bus> on pcib3
pcib1: <PCI to PCI bridge (vendor=8086 device=0964)> at device 9.0 on pci3
pci4: <PCI bus> on pcib1
amr0: <AMI MegaRAID> mem 0xfdc00000-0xfdffffff irq 2 at device 9.1 on pci3
amr0: <Series 467> Firmware 1.01, BIOS 1p00, 128MB RAM
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xccc0-0xccff mem 0xfaa00000-0xfaafffff,0xfabff000-0xfabfffff irq 5 at device 11.0 on pci3
fxp0: Ethernet address 00:02:b3:38:52:d2
pcib0: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 1 -> irq 10
IOAPIC #1 intpin 2 -> irq 11
IOAPIC #1 intpin 10 -> irq 13
IOAPIC #1 intpin 15 -> irq 16
pci0: <PCI bus> on pcib0
pci0: <ATI model 4759 graphics accelerator> at 4.0
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xfbefe000-0xfbefefff irq 10 at device 5.0 on pci0
aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe400-0xe4ff mem 0xfbefd000-0xfbefdfff irq 11 at device 5.1 on pci0
aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xe0c0-0xe0ff mem 0xfbd00000-0xfbdfffff,0xfbefc000-0xfbefcfff irq 13 at device 8.0 on pci0
fxp1: Ethernet address 00:b0:d0:d0:f3:2b
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x8b0-0x8bf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfbefb000-0xfbefbfff irq 16 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib4: <ServerWorks host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib4
pcib13: <ServerWorks host to PCI bridge> on motherboard
pci13: <PCI bus> on pcib13
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
acd0: CDROM <CRD-8482B> at ata0-master using PIO4
Waiting 15 seconds for SCSI devices to settle
amrd0: <MegaRAID logical drive> on amr0
amrd0: 34678MB (71020544 sectors) RAID 1 (optimal)
amrd1: <MegaRAID logical drive> on amr0
amrd1: 34678MB (71020544 sectors) RAID 1 (optimal)
no devsw (majdev=0 bootdev=0xa0200000)
Mounting root from ufs:/dev/amrd0s1a
--YZ5djTAD1cGYuMQK--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010515165800.A62545>