Date: Thu, 22 Jul 2010 03:30:09 -0400 (EDT) From: Charles Sprickman <spork@bway.net> To: Dan Langille <dan@langille.org> Cc: Adam Vande More <amvandemore@gmail.com>, "Andrey V. Elsukov" <bu7cher@yandex.ru>, freebsd-stable <freebsd-stable@freebsd.org> Subject: Re: Using GTP and glabel for ZFS arrays Message-ID: <alpine.OSX.2.00.1007220327170.33454@hotlap.local> In-Reply-To: <4C47ED09.7020808@langille.org> References: <4C47B57F.5020309@langille.org> <AANLkTimbYGpC0aYGnE61J5ZopQVD9m8hrz07CZAnsvsq@mail.gmail.com> <AANLkTikwNEXpTz-hpKLta0T3Lx67nRHtOaVLp_c7C8BI@mail.gmail.com> <4C47E610.2040409@langille.org> <4C47EC47.5090000@yandex.ru> <4C47ED09.7020808@langille.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 22 Jul 2010, Dan Langille wrote: > On 7/22/2010 2:59 AM, Andrey V. Elsukov wrote: >> On 22.07.2010 10:32, Dan Langille wrote: >>> I'm not sure of the criteria, but this is what I'm running: >>> >>> atapci0:<SiI 3124 SATA300 controller> port 0xdc00-0xdc0f mem >>> 0xfbeffc00-0xfbeffc7f,0xfbef0000-0xfbef7fff irq 17 at device 4.0 on pci7 >>> >>> atapci1:<SiI 3124 SATA300 controller> port 0xac00-0xac0f mem >>> 0xfbbffc00-0xfbbffc7f,0xfbbf0000-0xfbbf7fff irq 19 at device 4.0 on pci3 >>> >>> I added ahci_load="YES" to loader.conf and rebooted. Now I see: >> >> You can add siis_load="YES" to loader.conf for SiI 3124. > > Ahh, thank you. > > I'm afraid to do that now, before I label my ZFS drives for fear that the ZFS > array will be messed up. But I do plan to do that for the system after my > plan is implemented. Thank you. :) You may even get hotplug support if you're lucky. :) I just built a box and gave it a spin with the "old" ata stuff and then with the "new" (AHCI) stuff. It does perform a bit better and my BIOS claims it supports hotplug with ahci enabled as well... Still have to test that. Charles > -- > Dan Langille - http://langille.org/ > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.OSX.2.00.1007220327170.33454>