Date: Sat, 23 Aug 2003 00:10:17 +0400 From: Mikhail Manuilov <viper5k@pisem.net> To: freebsd-stable@freebsd.org Subject: lmmon IOCTL: Device not configured Message-ID: <3220000008.20030823001017@pisem.net> Resent-Message-ID: <20030822201432.DC16243FBD@mx1.FreeBSD.org>
next in thread | raw e-mail | index | archive | help
Hello, I have a problem with hardware monitors (chm, lmmon, healthd)
on my FreeBSD 4.8-STABLE box. Pentium 200 MMX, 64 DIMM, Tekram
Tekram-P5T30-B4 (430TX + PIIX4) rev 1.2 with latest bios.
#lmmon
IOCTL: Device not configured
#lmmon -i
Motherboard Temp Voltages
255C / 491F / 528K Vcore1: +3.984V
Vcore2: +3.984V
Fan Speeds + 3.3V: +3.984V
+ 5.0V: +6.654V
1: 0 rpm +12.0V: +15.938V
2: 0 rpm -12.0V: -15.938V
3: 0 rpm - 5.0V: -6.654V
#chm
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
IOCTL: Device not configured
Motherboard Temperature: 0 ° C
CPU_0 Temperature: 0 ° C
CPU_1 Temperature: 0 ° C
IOCTL: Device not configured
VCore: 0 V
IOCTL: Device not configured
Vit: 0 V
IOCTL: Device not configured
Vio: 0 V
IOCTL: Device not configured
+5V: 0 V
IOCTL: Device not configured
+12V: 0 V
IOCTL: Device not configured
-12V: -0 V
IOCTL: Device not configured
-5V: -0 V
IOCTL: Device not configured
Fan 1: -2147483648 rpm
IOCTL: Device not configured
Fan 2: -2147483648 rpm
IOCTL: Device not configured
Fan 3: -2147483648 rpm
#chm -I
Motherboard Temperature: 255 ° C
CPU_0 Temperature: 0 ° C
CPU_1 Temperature: 0 ° C
VCore: 3.98438 V
Vit: 3.98438 V
Vio: 3.98438 V
+5V: 6.65391 V
+12V: 15.9375 V
-12V: -15.9375 V
-5V: -6.65391 V
Fan 1: Not Available
Fan 2: Not Available
Fan 3: Not Available
#healthd -d
************************
* Hardware Information *
************************
Unknown Vendor: ID = FFFF
************************
Temp.= 255.0, 0.0, 0.0; Rot.= 0, 0, 0
Vcore = 4.08, 4.08; Volt. = 4.08, 6.85, 15.50, -14.16, -6.12
#healthd -d -S
ioctl(SMB_READB): Device not configured
InitMBInfo: Device not configured
Strings from kernel conf file:
# System Management Bus support
device smbus # Bus support, required for smb below.
device intpm # Intel PIIX4 (82371AB, 82443MX) Power Management Unit
device smb # standard io through
# I2C Bus Support
device iicbus # Bus support, required for ic/iic/iicsmb below.
device iicbb # generic bit-banging master-only driver
# for lpbb (parallel port specific bit-banging interface)
# and bktr (Brooktree848 video chipset, hardware and software
# master-only interface)
device ic # network IP interface
device iic # general i/o operation
device iicsmb # smb over i2c bridge
device pcf0 at isa? port 0x320 irq 5
# Philips PCF8584 master/slave interface
#dmesg (only related)
intpm0: <Intel 82371AB Power management controller> port 0x5c00-0x5c0f irq 9 at device 1.3 on pci0
intpm0: I/O mapped 5c00
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 5800
pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0
iicbus0: <Philips I2C bus> on pcf0 addr 0xaa
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus1: <System Management Bus> on iicsmb0
smb1: <SMBus general purpose I/O> on smbus1
iic0: <I2C general purpose I/O> on iic
Search - only same questions & no answers
Maybe somebody had solved such problems and can help me in mine ?
TALAOT
My respect to you. Viper
viper5k@pisem.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3220000008.20030823001017>