Date: Mon, 13 Nov 1995 17:11:45 +0100 From: se@zpr.uni-koeln.de (Stefan Esser) To: Eric Chet <ec0@s1.ganet.net> Cc: freebsd-hardware@freebsd.org Subject: Re: Moving from a NCR 53c810 to a 53c825 SCSI controller Message-ID: <199511131611.AA28662@Sysiphos> In-Reply-To: Eric Chet <ec0@s1.GANet.NET> "Moving from a NCR 53c810 to a 53c825 SCSI controller" (Nov 12, 16:22)
next in thread | previous in thread | raw e-mail | index | archive | help
On Nov 12, 16:22, Eric Chet wrote: } Subject: Moving from a NCR 53c810 to a 53c825 SCSI controller } Hello } } I have FreeBSD installed on a ASUS-SP3G mainboard system. I have } been using this system for about a year now with out any problems. I'm } going to slowly upgrade. I purchased a TYAN SCSI controller, which uses } the NCR 53c825 chip. The controller has a internal/external SCSI-II FAST } bus and a internal SCSI-II FAST/WIDE bus. I should have my Micropolis } 3243W drive in two weeks. I wanted to test the controller with my current } drives. I disabled the onboard controller and installed the 53c825. Well, the NCR driver falls into my area of responsibility ... Let's see: } ncr0 <ncr 53c825 scsi> rev 2 int a irq 11 on pci0:5 } ncr0 waiting for scsi devices to settle } (ncr0:0:0): "QUANTUM LP240S GM240S01X 6.4" type 0 fixed SCSI 2 } sd0(ncr0:0:0): Direct-Access } sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. } 234MB (479350 512 byte sectors) } (ncr0:1:0): "QUANTUM LP52S 950509405 2.8" type 0 fixed SCSI 2 } sd1(ncr0:1:0): Direct-Access } sd1(ncr0:1:0): 250ns (4 Mb/sec) offset 8. } 49MB (102171 512 byte sectors) } (ncr0:2:0): "PLEXTOR CD-ROM DM-XX28 3.08" type 5 removable SCSI 2 } cd0(ncr0:2:0): CD-ROM } cd0(ncr0:2:0): asynchronous. } cd present.[201408 x 2048 byte records] } chip1 <Intel 82378ZB PCI-ISA bridge> rev 3 on pci0:2 } vga0 <VGA-compatible display device> rev 1 on pci0:6 } } ncr0: aborting job } ncr0:0: ERROR (90:0) (0-0-ff00) (8/13) (c8c:50000000) } script cmd = 740a8700 } reg da 00 00 13 47 08 00 0f 35 08 00 00 80 00 07 0b This looks VERY wrong. The NCR driver seems to hang in the reselect code. Could you please reboot with "-v" entered at the boot prompt, and send me the boot message log ? I'll look into this as soon as I find the time. Regards, STefan -- Stefan Esser, Zentrum fuer Paralleles Rechnen Tel: +49 221 4706021 Universitaet zu Koeln, Weyertal 80, 50931 Koeln FAX: +49 221 4705160 ============================================================================== http://www.zpr.uni-koeln.de/~se <se@ZPR.Uni-Koeln.DE>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199511131611.AA28662>