Date: Tue, 2 Aug 2016 19:57:11 -0700 From: Mark Millard <markmi@dsl-only.net> To: freebsd-stable@freebsd.org, FreeBSD Ports <freebsd-ports@freebsd.org> Subject: FYI: amd64 FreeBSD 11.0-BETA3 running under VirtualBox on Mac OS X 10.11.6 : using qemu-system-sparc64 from emulators/qemu-devel in such a FreeBSD results in... Message-ID: <0E37812A-5CD7-4958-AD19-124DD98C3F6F@dsl-only.net>
next in thread | raw e-mail | index | archive | help
My first try at building qemu (really emulators/qemu-devel ) and trying = to use it. What I tried turns out to not work: CAM status: Command timeout and related material result. Context for the below amd64 FreeBSD 11.0-BETA3 -r303469 running under = VirtualBox 5.0.26 r108824 on Mac OS X 10.11.6 . (Nested contexts when qemu is then started from inside FreeBSD: So I was = not hopeful. But I only have slow hardware running FreeBSD directly as = stands so I figured I'd try the below.) > # truncate -s 4g IMGs/sparc64_FreeBSD.img > # qemu-system-sparc64 -nographic -m 2048 -cdrom = ISOs/FreeBSD-11.0-BETA3-sparc64-disc1.iso -drive = file=3DIMGs/sparc64_FreeBSD.img,format=3Draw -boot d > OpenBIOS for Sparc64 > Configuration device id QEMU version 1 machine id 0 > kernel cmdline=20 > CPUs: 1 x SUNW,UltraSPARC-IIi > UUID: 00000000-0000-0000-0000-000000000000 > Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:20 > Type 'help' for detailed information > Trying cdrom:f... > Not a bootable ELF image > Loading a.out image... > Loaded 7680 bytes > entry point is 0x4000 >=20 > Jumping to entry point 0000000000004000 for type 0000000000000005... > switching to new context: entry point 0x4000 stack 0x00000000ffe84a09 > =20 > >> FreeBSD/sparc64 boot block > Boot path: /pci@1fe,0/pci-ata@5/ide1@8200/cdrom@0:f > Boot loader: /boot/loader > Consoles: Open Firmware console =20 >=20 > FreeBSD/sparc64 bootstrap loader, Revision 1.0 > (root@releng2.nyi.freebsd.org, Fri Jul 29 09:00:35 UTC 2016) > bootpath=3D"/pci@1fe,0/pci-ata@5/ide1@8200/cdrom@0:a" > Loading /boot/defaults/loader.conf > /boot/kernel/kernel data=3D0xcb8b40+0x1edfd8 = syms=3D[0x8+0xd5468+0x8+0xc61f0] > \ > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel]... =20 > jumping to kernel entry at 0xc00b0000. > Copyright (c) 1992-2016 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 > The Regents of the University of California. All rights = reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 11.0-BETA3 #0 r303469: Fri Jul 29 09:02:50 UTC 2016 > = root@releng2.nyi.freebsd.org:/usr/obj/sparc64.sparc64/usr/src/sys/GENERIC = sparc64 > gcc version 4.2.1 20070831 patched [FreeBSD] > VT: init without driver. > real memory =3D 2147483648 (2048 MB) > avail memory =3D 2076041216 (1979 MB) > cpu0: Sun Microsystems UltraSparc-IIi Processor (100.00 MHz CPU) > random: entropy device external interface > kbd0 at kbdmux0 > nexus0: <Open Firmware Nexus device> > nexus0: <builtin>: incomplete > pcib0: <U2P UPA-PCI bridge> mem 0x1fe00000000-0x1fe01ffffff irq = 2032,2030,2031,2021 on nexus0 > pcib0: Sabre, impl 0, version 0, IGN 0x1f, bus A, 33MHz > pcib0: DVMA map: 0xc0000000 to 0xc3ffffff 8192 entries > pcib0: [GIANT-LOCKED] > pci0: <OFW PCI bus> on pcib0 > pcib1: <APB PCI-PCI bridge> at device 1.0 on pci0 > pci1: <OFW PCI bus> on pcib1 > pcib2: <APB PCI-PCI bridge> at device 1.1 on pci0 > pci2: <OFW PCI bus> on pcib2 > ebus0: <PCI-EBus2 bridge> port 0x4000-0x7fff mem 0x3000000-0x3ffffff = at device 3.0 on pci0 > vgapci0: <VGA-compatible display> mem = 0x1000000-0x1ffffff,0x2000000-0x2000fff at device 2.0 on pci0 > vgapci0: Boot video device > eeprom0: <EEPROM/clock> addr 0x1400002000-0x1400003fff on ebus0 > eeprom0: model mk48t59 > ebus0: <fdthree> addr 0 (no driver attached) > uart0: <16550 or compatible> addr 0x14000003f8-0x14000003ff irq 43 on = ebus0 > uart0: console (9600,n,8,1) > ebus0: <kb_ps2> addr 0x1400000060-0x1400000067 (no driver attached) > pci0: <network, ethernet> at device 4.0 (no driver attached) > atapci0: <SiI (CMD) 646U2 UDMA33 controller> port = 0x8100-0x8107,0x8180-0x8183,0x8200-0x8207,0x8280-0x8283,0x8300-0x830f at = device 5.0 on pci0 > ata2: <ATA channel> at channel 0 on atapci0 > ata3: <ATA channel> at channel 1 on atapci0 > cryptosoft0: <software crypto> on nexus0 > nexus0: <syscons> type unknown (no driver attached) > Timecounter "tick" frequency 100000000 Hz quality 1000 > Event timer "tick" frequency 100000000 Hz quality 1000 > Timecounters tick every 1.000 msec > ada0 at ata2 bus 0 scbus0 target 0 lun 0 > ada0: <QEMU HARDDISK 2.5+> ATA-7 device > ada0: Serial Number QM00001 > ada0: 33.300MB/s transfers (UDMA2, PIO 8192bytes) > ada0: 4096MB (8388608 512 byte sectors) > cd0 at ata3 bus 0 scbus1 target 0 lun 0 > cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device > cd0: Serial Number QM00003 > cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) > cd0: 528MB (270720 2048 byte sectors) > taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0 > taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0 > Trying to mount root from cd9660:/dev/iso9660/11_0_BETA3_SPARC64_CD = [ro]... > Starting file system checks: > Mounting local filesystems:. > random: unblocking device. > ELF ldconfig path: /lib /usr/lib /usr/lib/compat > /etc/rc: WARNING: $hostname is not set -- see rc.conf(5). > Setting up harvesting: = [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATT= ACH,CACHED > Feeding entropy: eval: cannot create /entropy: Read-only file system > (aprobe0:ata3:0:0:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 = 00 00 00 > (aprobe0:ata3:0:0:0): CAM status: Command timeout > (aprobe0:ata3:0:0:0): Retrying command > (aprobe0:ata3:0:0:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 = 00 00 00 > (aprobe0:ata3:0:0:0): CAM status: Command timeout > (aprobe0:ata3:0:0:0): Error 5, Retries exhausted > (aprobe0:ata3:0:0:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 = 00 00 00 > (aprobe0:ata3:0:0:0): CAM status: Command timeout > (aprobe0:ata3:0:0:0): Retrying command > (aprobe0:ata3:0:0:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 = 00 00 00 > (aprobe0:ata3:0:0:0): CAM status: Command timeout > (aprobe0:ata3:0:0:0): Error 5, Retries exhausted > (aprobe0:ata3:0:0:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 = 00 00 00 > (aprobe0:ata3:0:0:0): CAM status: Command timeout > (aprobe0:ata3:0:0:0): Error 5, Retry was blocked > cd0 at ata3 bus 0 scbus1 target 0 lun 0 > cd0: <QEMU QEMU DVD-ROM 2.5+> s/n QM00003 detached > (cd0:ata3:0:0:0): Periph destroyed > cd0 at ata3 bus 0 scbus1 target 0 lun 0 > cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device > cd0: Serial Number QM00003 > cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) > cd0: 528MB (270720 2048 byte sectors) > (aprobe0:ata3:0:0:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 = 00 00 00 > (aprobe0:ata3:0:0:0): CAM status: Command timeout > (aprobe0:ata3:0:0:0): Retrying command > (aprobe0:ata3:0:0:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 = 00 00 00 > (aprobe0:ata3:0:0:0): CAM status: Command timeout > (aprobe0:ata3:0:0:0): Error 5, Retries exhausted > vm_fault: pager read error, pid 167 (ifconfig) > pid 167 (ifconfig), uid 0: exited on signal 11 > Segmentation fault > (aprobe0:ata3:0:0:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 = 00 00 00 > (aprobe0:ata3:0:0:0): CAM status: Command timeout > (aprobe0:ata3:0:0:0): Retrying command > (aprobe0:ata3:0:0:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 = 00 00 00 > (aprobe0:ata3:0:0:0): CAM status: Command timeout > (aprobe0:ata3:0:0:0): Error 5, Retries exhausted > (aprobe0:ata3:0:0:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 = 00 00 00 > (aprobe0:ata3:0:0:0): CAM status: Command timeout > (aprobe0:ata3:0:0:0): Retrying command . . . (more similar material) . . . More context details: > # uname -apKU > FreeBSD FreeBSDx64 11.0-BETA3 FreeBSD 11.0-BETA3 #1 r303469M: Fri Jul = 29 03:54:43 PDT 2016 = markmi@FreeBSDx64:/usr/obj/clang/amd64.amd64/usr/src/sys/GENERIC-NODBG = amd64 amd64 1100120 1100120 > # svnlite info > Path: . > Working Copy Root Path: /usr/ports > URL: svn://svn.freebsd.org/ports/head > Relative URL: ^/head > Repository Root: svn://svn.freebsd.org/ports > Repository UUID: 35697150-7ecd-e111-bb59-0022644237b5 > Revision: 419343 > Node Kind: directory > Schedule: normal > Last Changed Author: riggs > Last Changed Rev: 419343 > Last Changed Date: 2016-07-31 00:15:14 -0700 (Sun, 31 Jul 2016) > # pkg info qemu-devel > qemu-devel-2.6.0_2 > Name : qemu-devel > Version : 2.6.0_2 > Installed on : Tue Aug 2 16:10:42 2016 PDT > Origin : emulators/qemu-devel > Architecture : freebsd:11:x86:64 > Prefix : /usr/local > Categories : emulators > Licenses : GPLv2 > Maintainer : bofh@FreeBSD.org > WWW : http://wiki.qemu.org/Main_Page > Comment : QEMU CPU Emulator - development version > Options : > CDROM_DMA : on > CURL : on > DOCS : on > GNS3 : on > GNUTLS : on > GTK2 : on > JPEG : on > OPENGL : on > PCAP : on > PNG : on > SAMBA : off > SASL : on > STATIC_LINK : off > USBREDIR : off > X11 : on > X86_TARGETS : off . . . =3D=3D=3D Mark Millard markmi at dsl-only.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0E37812A-5CD7-4958-AD19-124DD98C3F6F>