Date: Sun, 24 Oct 1999 10:44:57 +0200 From: Eric MASSON <e-masson@kisoft-services.com> To: jesse reynolds <jesse@va.com.au>, FreeBSD Mobile <freebsd-mobile@FreeBSD.ORG> Subject: Re: zircom pc-card's on a Fujitsu Lifebook 735Dx Laptop... Message-ID: <3812C709.19E089D8@kisoft-services.com> References: <Pine.BSF.4.10.9910031525060.59163-100000@60-Hz.Powered-By.AC> <199910230809.CAA28033@harmony.village.org> <v04205504b4375c44a68a@[1.1.1.3]> <38120042.D8F1BE5D@kisoft-services.com> <v04205509b438434df8a2@[1.1.1.3]> <3812C2FB.F273B5E2@kisoft-services.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi again, you have to put pccard_enable="YES" in your /etc/rc.conf. Sorry for previous answer, it's early in the morning here and i've just get out of the bed :). For purpose test you can issue a pccardd -d from the command line, it will cause pccardd to start and not daemonize, useful for debugging. you can find syntax for lines in /etc/rc.conf just by searching the topics you need in /etc/defaults/rc.conf. /etc/rc.conf is an override for previous file. Eric Eric MASSON a écrit : > > Hi, > > So could you post the following: > 1 - uname -a output > 2 - /etc/rc.conf > 3 - kernel config file > 4 - dmesg output > > I post the previous answer because, you get this kind of result if > pccardd isn't started when issueing pccardc dumpcis. > > Eric > > Ps: Cross posting is not in standard policies of FreeBSD mailing lists. > > jesse reynolds a écrit : > > > > At 8:36 PM +0200 23/10/1999, Eric MASSON wrote: > > >Hi > > > > > >> # pccardc dumpcis > > >> Read return -1 bytes (expected 2) > > >> pccardc: CIS code read: Cannot allocate memory > > >> Read return -1 bytes (expected 10) > > >> Configuration data for card in slot 1 > > >> 2 slots found > > >Enable pccardd start in /etc/rc.conf and then pccardc dumpcis will work > > >properly. > > > > How should I do this? eg: > > > > pccardd_start="YES" > > > > is this what you mean? It's not working. I get the same output as > > above, only doubled, as I have both the cards installed (two of > > them). I'm not sure of the syntax to use here. I also tried the > > following with no success: > > > > pccardd_enable="YES" > > > > I actually thought it might be more to do with the order of the > > drivers starting up in the kernel, as it tries to probe for xe before > > it's loaded the PC-Card driver, and initialises xe and sio: > > > > xe0: probe > > xe0 not found > > . > > . > > . > > PC-Card VLSI 82C146 (5 mem & 2 I/O windows) > > pcic: controller irq 3 > > Initializing PC-card drivers: xe sio > > > > then again I'm probably barking up the wrong tree. Anyone? > > > > cheers > > > > jesse > > > > -- > > Jesse Reynolds - Virtual Artists Pty Ltd - http://www.va.com.au > > > > Faxmail: +61 2 9776 3594 Virtual Community Engine > > Email: jesse (at) va.com.au http://www.vce.net > > ?: http://jesse.va.com.au huh?: Community Server for > > ICQ: 4766684 MacOS Servers (W*API) > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-mobile" in the body of the message > > -- > Any opinions expressed above | Murphy's Law Corollary : > are my own, not Kisoft's | Murphy was an optimist. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message -- Any opinions expressed above | Murphy's Law Corollary : are my own, not Kisoft's | Murphy was an optimist. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3812C709.19E089D8>