Date: Wed, 5 Apr 2006 06:46:29 -0700 From: David Paul Zimmerman <dpz@ack.berkeley.edu> To: "Pawel Worach" <pawel.worach@gmail.com> Cc: current@freebsd.org Subject: Re: mpt(4) mirror problems Message-ID: <cc55547e5d42b5f31035642e0d7811bb@ack.berkeley.edu> In-Reply-To: <d227e09e0604041154y525f298ckada123006c190d0c@mail.gmail.com> References: <d227e09e0604041154y525f298ckada123006c190d0c@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I noticed a similar thing on my Sun X4100 (LSI1064) after csup'ing yesterday. I'll be rolling back to my Mar 10 snapshot kernel when I get into work. dp On Apr 4, 2006, at 11:54 AM, Pawel Worach wrote: > Hi, > > After the recent changes to mpt(4) it seems the driver has some isses > with the mirroring configuration (two . This is on a IBM x345 server > with a kernel from today. > > kernel messages: > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2600-0x26ff mem > 0xf7ff0000-0xf7fffff > f,0xf7fe0000-0xf7feffff irq 27 at device 7.0 on pci8 > mpt0: [GIANT-LOCKED] > mpt0: MPI Version=1.2.15.0 > mpt0: Capabilities: ( RAID-1 SAFTE ) > mpt0: 1 Active Volume (1 Max) > mpt0: 2 Hidden Drive Members (6 Max) > mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x2700-0x27ff mem > 0xf7fd0000-0xf7fdfff > f,0xf7fc0000-0xf7fcffff irq 28 at device 7.1 on pci8 > mpt1: [GIANT-LOCKED] > mpt1: MPI Version=1.2.15.0 > mpt1: Capabilities: ( RAID-1 SAFTE ) > mpt1: 0 Active Volumes (0 Max) > mpt1: 0 Hidden Drive Members (0 Max) > ... > mpt0:vol0(mpt0:0:0): Settings ( Hot-Plug-Spares ) > mpt0:vol0(mpt0:0:0): Using Spare Pool: 0 > mpt0:vol0(mpt0:0:0): 2 Members: > (mpt0:0:0): Primary > (mpt0:0:1): Secondary > mpt0:vol0(mpt0:0:0): RAID-1 - Optimal > mpt0:vol0(mpt0:0:0): Status ( Enabled ) > (mpt0:vol0:0): Physical (mpt0:0:0), Pass-thru (mpt0:1:0) > (mpt0:vol0:0): Online > (mpt0:vol0:1): Physical (mpt0:0:1), Pass-thru (mpt0:1:1) > (mpt0:vol0:1): Online > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0: mpt_cam_event: 0xb > (mpt0:vol0:0): Physical Disk Status Changed > mpt0: mpt_cam_event: 0xb > (mpt0:vol0:0): Volume Status Changed > mpt0: mpt_cam_event: 0xb > (mpt0:vol0:0): Physical Disk Status Changed > mpt0: IOC Bus Reset Port: 0 > mpt0: mpt_write_cfg_page: Config Info Status 2 > mpt0: mpt_setwidth: write cur page failed > mpt0: Set width Failed! > mpt0: IOC Bus Reset Port: 0 > mpt0: mpt_read_cfg_page: Config Info Status 2 > mpt0: mpt_setwidth: read cur page failed > mpt0: Set width Failed! > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0:vol0(mpt0:0:0): RAID-1 - Degraded > mpt0:vol0(mpt0:0:0): Status ( Enabled ) > (mpt0:vol0:0): No longer configured > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0: mpt_read_cfg_page: Config Info Status 2 > mpt0: cannot get target 1 DP0 > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > mpt0: IOC Bus Reset Port: 0 > SMP: AP CPU #2 Launched! > SMP: AP CPU #1 Launched! > SMP: AP CPU #3 Launched! > <really long freeze here> > da0 at mpt0 bus 0 target 0 lun 0 > da0: <LSILOGIC 1030 IM IM 1000> Fixed Direct Access SCSI-2 device > da0: 3.300MB/s transfers, Tagged Queueing Enabled > da0: 34710MB (71087625 512 byte sectors: 255H 63S/T 4425C) > Trying to mount root from ufs:/dev/da0s1a > > Booting an older kernel from around Mar. 25 works fine. Anything else > I can dig out? > > -- > Pawel > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to > "freebsd-current-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?cc55547e5d42b5f31035642e0d7811bb>