Date: Thu, 16 May 1996 01:15:21 -0900 (GMT) From: Woohyong Choi <whchoi@cosmos.kaist.ac.kr> To: freebsd-multimedia@freebsd.org Cc: hasty@rah.star-gate.com, whchoi@cosmos.kaist.ac.kr (Woohyong Choi), yichoi@cosmos.kaist.ac.kr (Youngil Choi) Subject: problem installing beta release for the gus pnp pro Message-ID: <199605161015.BAA04876@cosmos.kaist.ac.kr>
next in thread | raw e-mail | index | archive | help
hi again, freebsd-multimedia hackers!
i've retrieved guspnp.tar.gz from your host and trying to install
it onto 2.2-960501-SNAP snapshot distribution.
I've followed instructions given in the README.GUSPNP, to unpack
the release,
cd /sys/i386/isa
mv sound sound.old
tar -xzf guspnp.tar.gz
then i've ran configure as follows,
bash# ./configure
Configuring the sound support
Old configuration exists in /etc/soundconf. Use it (y/n) ? n
/* Generated by configure. Don't edit!!!! */
/* Making changes to this file is not as simple as it may look. */
ProAudioSpectrum 16 support (n/y) ? n
SoundBlaster support (n/y) ? n
Generic OPL2/OPL3 FM synthesizer support (n/y) ? n
Gravis Ultrasound support (n/y) ? y
MPU-401 support (NOT for SB16) (n/y) ? n
6850 UART Midi support (n/y) ? n
PSS (ECHO-ADI2111) support (n/y) ? n
16 bit sampling option of GUS (_NOT_ GUS MAX) (n/y) ? n
GUS MAX support (n/y) ? y
Microsoft Sound System support (n/y) ? n
Ensoniq Soundscape support (n/y) ? n
MediaTriX AudioTriX Pro support (n/y) ? n
Support for MAD16 and/or Mozart based cards (n/y) ? n
Support for Crystal CS4232 based (PnP) cards (n/y) ? n
Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers (n/y) ? n
/dev/dsp and /dev/audio supports (usually required) (y/n) ? y
MIDI interface support (y/n) ? n
#define KERNEL_SOUNDCARD
#undef CONFIG_PAS
#undef CONFIG_SB
#undef CONFIG_ADLIB
#define CONFIG_GUS
#undef CONFIG_MPU401
#undef CONFIG_UART6850
#undef CONFIG_PSS
#undef CONFIG_GUS16
#define CONFIG_GUSMAX
#undef CONFIG_MSS
#undef CONFIG_SSCAPE
#undef CONFIG_TRIX
#undef CONFIG_MAD16
#undef CONFIG_CS4232
#undef CONFIG_MAUI
#undef CONFIG_PNP
#undef CONFIG_SBPRO
#undef CONFIG_SB16
#undef CONFIG_AEDSP16
#define CONFIG_AUDIO
#undef CONFIG_MIDI
#undef CONFIG_YM3812
#define CONFIG_SEQUENCER
#undef CONFIG_MPU_EMU
#define CONFIG_AD1848
Select the DMA buffer size (4096, 16384, 32768 or 65536 bytes)
65536 is recommended value for this configuration.
Enter the value: 65536
The DMA buffer size set to 65536
#define DSP_BUFFSIZE 65536
#define SELECTED_SOUND_OPTIONS 0x01080108
The sound driver is now configured.
Save copy of this configuration to /etc/soundconf (y/n)y
bash#
and then copied /etc/soundconf into /sys/i386/isa/sound/local.h
then I get the following error during the kernel make process.
cc -c -O -W -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Winline -nostdinc -I. -I../.. -I../../sys -I../../../include -DI386_CPU -DI486_CPU -DI586_CPU -DI686_CPU -DAPM_BROKEN_STATCLOCK -DATAPI_STATIC -DATAPI -DMETEOR_ALLOC_PAGES=151 -DFAILSAFE -DCOMPAT_43 -DCD9660 -DMSDOSFS -DGRF_NTSC -DMULTICAST -DNFS -DFFS -DINET -DKERNEL ../../i386/isa/sound/dev_table.c
In file included from ../../i386/isa/sound/os.h:9,
from ../../i386/isa/sound/sound_config.h:40,
from ../../i386/isa/sound/dev_table.c:31:
../../sys/user.h:70: field `e_vm' has incomplete type
In file included from ../../i386/isa/sound/sound_config.h:186,
from ../../i386/isa/sound/dev_table.c:31:
../../i386/isa/sound/sound_calls.h:166: warning: redundant redeclaration of `gusintr' in same scope
./ioconf.h:17: warning: previous declaration of `gusintr'
../../i386/isa/sound/dev_table.c:41: warning: no previous prototype for `snd_find_driver'
../../i386/isa/sound/dev_table.c:131: warning: no previous prototype for `sndtable_init'
../../i386/isa/sound/dev_table.c:137: warning: no previous prototype for `sound_unload_drivers'
../../i386/isa/sound/dev_table.c:162: warning: no previous prototype for `sound_unload_driver'
../../i386/isa/sound/dev_table.c:194: warning: no previous prototype for `sndtable_probe'
../../i386/isa/sound/dev_table.c:265: warning: no previous prototype for `sndtable_init_card'
../../i386/isa/sound/dev_table.c:323: warning: no previous prototype for `sndtable_identify_card'
../../i386/isa/sound/dev_table.c:345: warning: no previous prototype for `sound_chconf'
../../i386/isa/sound/dev_table.c:375: warning: no previous prototype for `sound_getconf'
*** Error code 1
just for your information, my kernel definitions are as follows,
thanks for your continuing help!
-whchoi
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# $Id: GENERIC,v 1.69 1996/05/01 03:26:58 bde Exp $
#
machine "i386"
cpu "I386_CPU"
cpu "I486_CPU"
cpu "I586_CPU"
cpu "I686_CPU"
ident GENERIC
maxusers 10
options SYSVMSG
options SYSVSEM
options SYSVSHM
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MULTICAST
options GRF_NTSC
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
config kernel root on wd0
controller isa0
controller eisa0
controller pci0
device meteor0
options METEOR_ALLOC_PAGES=151
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
tape ft0 at fdc0 drive 2
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device wcd0 #IDE CD-ROM
# A single entry for any of these controllers (ncr, ahb, ahc) is sufficient
# for any number of installed devices.
#controller ncr0
#controller ahb0
controller ahc0
#controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr
#controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
#controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
#controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seai
ntr
controller scbus0
device sd0
device od0
device st0
device cd0 #Only need one of these, the code dynamically grows
device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr
controller matcd0 at isa? port 0x230 bio
device scd0 at isa? port 0x230 bio
controller snd0
device gus0 at isa? port 0x220 irq 11 drq 1 flags 0x3 vector gusintr
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options PCVT_FREEBSD=210 # pcvt running on FreeBSD >= 2.0
.5
#options XSERVER # include code for XFree86
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Mandatory, don't remove
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
#
# Laptop support (see LINT for more options)
#
device apm0 at isa? disable # Advanced Power Management
options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr
device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
device lpt1 at isa? port? tty
device lpt2 at isa? port? tty
device mse0 at isa? port 0x23c tty irq 5 vector mseintr
device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vecto
r psmintr
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device de0
device fxp0
device vx0
device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
device ep0 at isa? port 0x300 net irq 10 vector epintr
device fe0 at isa? port 0x300 net irq ? vector feintr
device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
# keep this if you want to be able to continue to use /stand/sysinstall
pseudo-device gzip # Exec gzipped a.out's
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199605161015.BAA04876>