Date: Wed, 1 Feb 2006 11:56:03 +0100 From: =?ISO-8859-1?Q?Johan_Str=F6m?= <johan@stromnet.org> To: holm@freibergnet.de, freebsd-stable@freebsd.org Subject: Re: SCSI device timeout Message-ID: <F20B9E1F-19FD-4089-A940-F41D46C21457@stromnet.org> In-Reply-To: <20060201104249.GA1263@pegasus.freiberg-net.de> References: <001c01c62666$76b26400$0102a8c0@bogomip> <20060201095718.GA1025@pegasus.freiberg-net.de> <938E255B-24CC-4844-B077-A623795300D9@stromnet.org> <20060201104249.GA1263@pegasus.freiberg-net.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On 1 feb 2006, at 11.42, Holm Tiffe wrote: > Johan Str=F6m wrote: > >> On 1 feb 2006, at 10.57, Holm Tiffe wrote: >> >>> Derkjan de Haan wrote: >>> >>>> All, >>>> >>>> Today, after a cvsup (RELENG_6) and a rebuild of kernel and =20 >>>> world, my >>>> system no longer boots. It hangs on >>>> >>>> Waiting 5 seconds for SCSI devices to settle >>>> >>>> Booting from the previous kernel allows my system to boot again. >>>> Please let >>>> me know if I can do anything to diagnose further. >>>> >>>> >>>> regards, >>>> >>>> Derkjan de Haan >>>> >>> >>> I have exactly the same problem here on a ASUS A7V333 Motherboard =20= >>> and >>> an Adaptec 3960D SCSI Controller. >>> >>> The problem seems to be in the acpi interrupt routing, I've updated >>> the mainboard Bios to the last available version in the meantime >>> (1018.004 Beta) with no luck. Disabling acpi completly helps booting >>> the machine again.. >> >> Hi >> >> I got one of those motherboards.. however no SCSI card but a promise. >> Ive hade huge problems with it (check out the "Page fault, GEOM >> problem??" thread). The problems i had was random crashes and very >> bad speed to the disks. >> It was solved by throwing the mobo out with a new one with nforce2 >> chipset... Got great speeds now and haven't had a crash since i >> installed it (roughly a week now). >> >> Johan Str=F6m >> johan@stromnet.org >> http://www.stromnet.org/ >> > > No Johan, my A7V333 has no problem, it runs for arounrd 2 years now =20= > as my > personal workstation here at work 24/7. > > I've cvsupped RELENG_6 again for an hour or so and the now build =20 > kernel > runs flawlessly. There are some new patches in the pci code. > > Regards, > > Holm > --=20 > L&P::Kommunikation GbR Holm Tiffe * Administration, =20 > Development > FreibergNet.de Internet Systems phone +49 3731 =20 > 419010 > Bereich Server & Technik fax +49 3731 =20 > 4196026 > D-09599 Freiberg * Am St. Niclas Schacht 13 http://=20 > www.freibergnet.de Hi, yes I've been running it for around 2-3 years too, but with =20 linux. A couple of months ago I switched to fbsd and problems began =20 to occur. Might not be the same problem however..
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F20B9E1F-19FD-4089-A940-F41D46C21457>