Date: Tue, 3 Jan 2006 17:38:56 +0700 From: budsz <budiyt@gmail.com> To: freebsd-net@freebsd.org Subject: Need help WFQ Message-ID: <4d4dc3640601030238r2faf55bua234869c396b76f6@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi,
I hope you give me some advice or explaination about Dummynet.
I've googling/experiment for three a month to get the right answer how
to use WF2Q+ with Dummynet. I've a small internet cafe and after 4
years using FreeBSD+Dummynet with hardlink limiting policy. Here for
WF2Q+ implementation
in my internet cafe:
In /etc/rc.firewall look like:
# IP Address variable
ip_cl_01=3D"192.168.0.1/32"
ip_cl_10=3D"192.168.0.10/32"
ip_cl_11=3D"192.168.0.11/32"
ip_cl_12=3D"192.168.0.12/32"
ip_cl_13=3D"192.168.0.13/32"
ip_cl_14=3D"192.168.0.14/32"
ip_cl_50=3D"192.168.0.50/32"
# Bandwidth variable
bw_share=3D"152Kbit/s"
${fwcmd} add 104 queue 1 ip from ${ip_cl_01} to any via ${eth_1}
${fwcmd} add 105 queue 1 ip from any to ${ip_cl_01} via ${eth_1}
${fwcmd} add 106 queue 2 ip from ${ip_cl_10} to any via ${eth_1}
${fwcmd} add 107 queue 2 ip from any to ${ip_cl_10} via ${eth_1}
${fwcmd} add 108 queue 3 ip from ${ip_cl_11} to any via ${eth_1}
${fwcmd} add 109 queue 3 ip from any to ${ip_cl_11} via ${eth_1}
${fwcmd} add 110 queue 4 ip from ${ip_cl_12} to any via ${eth_1}
${fwcmd} add 111 queue 4 ip from any to ${ip_cl_12} via ${eth_1}
${fwcmd} add 112 queue 5 ip from ${ip_cl_13} to any via ${eth_1}
${fwcmd} add 113 queue 5 ip from any to ${ip_cl_13} via ${eth_1}
${fwcmd} add 114 queue 6 ip from ${ip_cl_14} to any via ${eth_1}
${fwcmd} add 115 queue 6 ip from any to ${ip_cl_14} via ${eth_1}
${fwcmd} add 116 queue 7 ip from ${ip_cl_50} to any via ${eth_1}
${fwcmd} add 117 queue 7 ip from any to ${ip_cl_50} via ${eth_1}
${fwcmd} queue 1 config pipe 3 weight 3 mask all
${fwcmd} queue 2 config pipe 3 weight 3 mask all
${fwcmd} queue 3 config pipe 3 weight 3 mask all
${fwcmd} queue 4 config pipe 3 weight 3 mask all
${fwcmd} queue 5 config pipe 3 weight 3 mask all
${fwcmd} queue 6 config pipe 3 weight 3 mask all
${fwcmd} queue 7 config pipe 3 weight 1 mask all
${fwcmd} pipe 3 config bw ${bw_share}
With that rule I want to limit every client (IN/OUT) with ratio:
for ex: client-01 =3D> 3/19 * 152 Kbit/s =3D 24 Kbit/s
client-10 =3D> 3/19 * 153 Kbit/s =3D 24 Kbit/s
etc..
I assume all of my client already active using internet. But sometime
"client-11" always get 100 Kbit/s. Does my rule is OK? if not, would
you give me example the right rule for this situation, of couse with
clarification (step by step).
FYI, I use FreeBSD 4.10-RELEASE & FreeBSD 4.11-STABLE.
Thanks You.
--
budsz
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4d4dc3640601030238r2faf55bua234869c396b76f6>