Date: Tue, 04 Nov 2003 10:30:07 -0700 From: "Stephane Raimbault" <segr@hotmail.com> To: kuriyama@imgsrc.co.jp Cc: current@freebsd.org Subject: Re: 5.1-R and 5.1-C floppies will not boot on SuperMicro 6023P-8R Message-ID: <Law10-F82Ddrg3DVocb0002169b@hotmail.com>
next in thread | raw e-mail | index | archive | help
Ah okay... that makes more sense and the results definately show more data
that I'm sure will help pinpoint the problem. Here is the paste from the
bootup.
FreeBSD/i386 boot
Default: 0:fd(0,a)/boot/loader
boot:
Uncompressing ... done
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 633kB/4061120kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
(root@ushi.jp.freebsd.org, Tue Nov 4 09:12:55 GMT 2003)
>include /boot/device.hints
>set hint.fdc.0.at="isa"
>set hint.fdc.0.port="0x3F0"
>set hint.fdc.0.irq="6"
>set hint.fdc.0.drq="2"
>set hint.fd.0.at="fdc0"
>set hint.fd.0.drive="0"
>set hint.fd.1.at="fdc0"
>set hint.fd.1.drive="1"
>set hint.ata.0.at="isa"
>set hint.ata.0.port="0x1F0"
>set hint.ata.0.irq="14"
>set hint.ata.1.at="isa"
>set hint.ata.1.port="0x170"
>set hint.ata.1.irq="15"
>set hint.adv.0.at="isa"
>set hint.adv.0.disabled="1"
>set hint.bt.0.at="isa"
>set hint.bt.0.disabled="1"
>set hint.aha.0.at="isa"
>set hint.aha.0.disabled="1"
>set hint.aic.0.at="isa"
>set hint.aic.0.disabled="1"
>set hint.atkbdc.0.at="isa"
>set hint.atkbdc.0.port="0x060"
>set hint.atkbd.0.at="atkbdc"
>set hint.atkbd.0.irq="1"
>set hint.atkbd.0.flags="0x1"
>set hint.psm.0.at="atkbdc"
>set hint.psm.0.irq="12"
>set hint.vga.0.at="isa"
>set hint.sc.0.at="isa"
>set hint.sc.0.flags="0x100"
>set hint.vt.0.at="isa"
>set hint.vt.0.disabled="1"
>set hint.apm.0.disabled="1"
>set hint.apm.0.flags="0x20"
>set hint.pcic.0.at="isa"
>set hint.pcic.0.port="0x3e0"
>set hint.pcic.0.maddr="0xd0000"
>set hint.pcic.1.at="isa"
>set hint.pcic.1.irq="11"
>set hint.pcic.1.port="0x3e2"
>set hint.pcic.1.maddr="0xd4000"
>set hint.pcic.1.disabled="1"
>set hint.sio.0.at="isa"
>set hint.sio.0.port="0x3F8"
>set hint.sio.0.flags="0x10"
>set hint.sio.0.irq="4"
>set hint.sio.1.at="isa"
>set hint.sio.1.port="0x2F8"
>set hint.sio.1.irq="3"
>set hint.sio.2.at="isa"
>set hint.sio.2.disabled="1"
>set hint.sio.2.port="0x3E8"
>set hint.sio.2.irq="5"
>set hint.sio.3.at="isa"
>set hint.sio.3.disabled="1"
>set hint.sio.3.port="0x2E8"
>set hint.sio.3.irq="9"
>set hint.ppc.0.at="isa"
>set hint.ppc.0.irq="7"
>set hint.ed.0.at="isa"
>set hint.ed.0.disabled="1"
>set hint.ed.0.port="0x280"
>set hint.ed.0.irq="10"
>set hint.ed.0.maddr="0xd8000"
>set hint.cs.0.at="isa"
>set hint.cs.0.disabled="1"
>set hint.cs.0.port="0x300"
>set hint.sn.0.at="isa"
>set hint.sn.0.disabled="1"
>set hint.sn.0.port="0x300"
>set hint.sn.0.irq="10"
>set hint.ie.0.at="isa"
>set hint.ie.0.disabled="1"
>set hint.ie.0.port="0x300"
>set hint.ie.0.irq="10"
>set hint.ie.0.maddr="0xd0000"
>set hint.fe.0.at="isa"
>set hint.fe.0.disabled="1"
>set hint.fe.0.port="0x300"
>set hint.le.0.at="isa"
>set hint.le.0.disabled="1"
>set hint.le.0.port="0x300"
>set hint.le.0.irq="5"
>set hint.le.0.maddr="0xd0000"
>set hint.lnc.0.at="isa"
>set hint.lnc.0.disabled="1"
>set hint.lnc.0.port="0x280"
>set hint.lnc.0.irq="10"
>set hint.lnc.0.drq="0"
>load /kernel
/kernel text=0x23bf5c data=0x2efa4+0x4bebc -
>echo \007\007
>echo Please insert MFS root floppy and press enter:
Please insert MFS root floppy and press enter:
>read
>load -t mfs_root /mfsroot
>set hint.acpi.0.disabled=1
>set driver_floppy=YES
>set module_path="/modules;/dist"
>echo \007\007
>autoboot 10
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/kernel] in 7 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
SMAP type=01 base=0000000000000000 len=000000000009e400
SMAP type=02 base=000000000009e400 len=0000000000001c00
SMAP type=02 base=00000000000dc000 len=0000000000024000
SMAP type=01 base=0000000000100000 len=00000000f7df0000
SMAP type=03 base=00000000f7ef0000 len=000000000000c000
SMAP type=04 base=00000000f7efc000 len=0000000000004000
SMAP type=01 base=00000000f7f00000 len=0000000000080000
SMAP type=02 base=00000000f7f80000 len=0000000000080000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000ff800000 len=0000000000400000
SMAP type=02 base=00000000fff00000 len=0000000000100000
SMAP type=01 base=0000000100000000 len=0000000008000000
131072K of memory above 4GB ignored
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT-20031104-JPSNAP #0: Tue Nov 4 09:31:14 GMT 2003
root@ushi.jp.freebsd.org:/usr/obj/usr/src/sys/BOOTMFS
Preloaded elf kernel "/kernel" at 0xc0af1000.
Preloaded mfs_root "/mfsroot" at 0xc0af12cc.
Calibrating clock(s) ... i8254 clock: 1193298 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2399327592 Hz
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf25 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 4160225280 (3967 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x00000000f3913fff, 4073644032 bytes (994542 pages)
0x00000000f7f00000 - 0x00000000f7f77fff, 491520 bytes (120 pages)
avail memory = 4043706368 (3856 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6840
bios32: Entry = 0xfd650 (c00fd650) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd650+0x225
pnpbios: Found PnP BIOS data at 0xc00f68a0
pnpbios: Entry = f0000:9394 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc06b7dc0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=254c8086)
pcibios: BIOS version 2.10
Using $PIR table, 29 entries at 0xc00fddf0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 6 2 1 A 0x68 3 4 5 7 10 11 12 14 15
slot 6 2 1 B 0x68 3 4 5 7 10 11 12 14 15
slot 6 2 1 C 0x68 3 4 5 7 10 11 12 14 15
slot 6 2 1 D 0x68 3 4 5 7 10 11 12 14 15
slot 7 2 2 A 0x68 3 4 5 7 10 11 12 14 15
slot 7 2 2 B 0x68 3 4 5 7 10 11 12 14 15
slot 7 2 2 C 0x68 3 4 5 7 10 11 12 14 15
slot 7 2 2 D 0x68 3 4 5 7 10 11 12 14 15
slot 5 3 1 A 0x68 3 4 5 7 10 11 12 14 15
slot 5 3 1 B 0x68 3 4 5 7 10 11 12 14 15
slot 5 3 1 C 0x68 3 4 5 7 10 11 12 14 15
slot 5 3 1 D 0x68 3 4 5 7 10 11 12 14 15
slot 11 3 2 A 0x68 3 4 5 7 10 11 12 14 15
slot 11 3 2 B 0x68 3 4 5 7 10 11 12 14 15
slot 11 3 2 C 0x68 3 4 5 7 10 11 12 14 15
slot 11 3 2 D 0x68 3 4 5 7 10 11 12 14 15
slot 3 5 1 A 0x69 3 4 5 7 10 11 12 14 15
slot 3 5 1 B 0x69 3 4 5 7 10 11 12 14 15
slot 3 5 1 C 0x69 3 4 5 7 10 11 12 14 15
slot 3 5 1 D 0x69 3 4 5 7 10 11 12 14 15
slot 2 5 2 A 0x69 3 4 5 7 10 11 12 14 15
slot 2 5 2 B 0x69 3 4 5 7 10 11 12 14 15
slot 2 5 2 C 0x69 3 4 5 7 10 11 12 14 15
slot 2 5 2 D 0x69 3 4 5 7 10 11 12 14 15
slot 1 5 3 A 0x69 3 4 5 7 10 11 12 14 15
slot 1 5 3 B 0x69 3 4 5 7 10 11 12 14 15
slot 1 5 3 C 0x69 3 4 5 7 10 11 12 14 15
slot 1 5 3 D 0x69 3 4 5 7 10 11 12 14 15
slot 4 6 1 A 0x69 3 4 5 7 10 11 12 14 15
slot 4 6 1 B 0x69 3 4 5 7 10 11 12 14 15
slot 4 6 1 C 0x69 3 4 5 7 10 11 12 14 15
slot 4 6 1 D 0x69 3 4 5 7 10 11 12 14 15
slot 9 6 2 A 0x69 3 4 5 7 10 11 12 14 15
slot 9 6 2 B 0x69 3 4 5 7 10 11 12 14 15
slot 9 6 2 C 0x69 3 4 5 7 10 11 12 14 15
slot 9 6 2 D 0x69 3 4 5 7 10 11 12 14 15
slot 8 17 1 A 0x63 3 4 5 7 10 11 12 14 15
slot 8 17 1 B 0x63 3 4 5 7 10 11 12 14 15
slot 8 17 1 C 0x63 3 4 5 7 10 11 12 14 15
slot 8 17 1 D 0x63 3 4 5 7 10 11 12 14 15
slot 7 18 1 A 0x63 3 4 5 7 10 11 12 14 15
slot 7 18 1 B 0x63 3 4 5 7 10 11 12 14 15
slot 7 18 1 C 0x63 3 4 5 7 10 11 12 14 15
slot 7 18 1 D 0x63 3 4 5 7 10 11 12 14 15
slot 10 7 1 A 0x60 3 4 5 7 10 11 12 14 15
slot 10 7 1 B 0x60 3 4 5 7 10 11 12 14 15
slot 10 7 1 C 0x60 3 4 5 7 10 11 12 14 15
slot 10 7 1 D 0x60 3 4 5 7 10 11 12 14 15
slot 11 7 2 A 0x61 3 4 5 7 10 11 12 14 15
slot 11 7 2 B 0x61 3 4 5 7 10 11 12 14 15
slot 11 7 2 C 0x61 3 4 5 7 10 11 12 14 15
slot 11 7 2 D 0x61 3 4 5 7 10 11 12 14 15
slot 12 7 3 A 0x62 3 4 5 7 10 11 12 14 15
slot 12 7 3 B 0x62 3 4 5 7 10 11 12 14 15
slot 12 7 3 C 0x62 3 4 5 7 10 11 12 14 15
slot 12 7 3 D 0x62 3 4 5 7 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 7 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 7 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 7 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 7 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 7 10 11 12 14 15
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x254c, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2541, revid=0x01
bus=0, slot=0, func=1
class=ff-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2543, revid=0x01
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2545, revid=0x01
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00002000, size 5, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 0:29 INTA BIOS irq 11
found-> vendor=0x8086, dev=0x2482, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 00002020, size 5, enabled
pci_cfgintr_valid: BIOS irq 10 is valid
pci_cfgintr: 0:29 INTB BIOS irq 10
found-> vendor=0x8086, dev=0x2484, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type 4, range 32, base 00002040, size 5, enabled
pci_cfgintr_valid: BIOS irq 5 is valid
pci_cfgintr: 0:29 INTC BIOS irq 5
found-> vendor=0x8086, dev=0x2487, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
found-> vendor=0x8086, dev=0x244e, revid=0x42
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2480, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 000001f0, size 3, enabled
map[14]: type 4, range 32, base 000003f4, size 2, enabled
map[18]: type 4, range 32, base 00000170, size 3, enabled
map[1c]: type 4, range 32, base 00000374, size 2, enabled
map[20]: type 4, range 32, base 00002060, size 4, enabled
found-> vendor=0x8086, dev=0x248b, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001100, size 5, enabled
found-> vendor=0x8086, dev=0x2483, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 3
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xf8100000-0xf82fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base f8100000, size 12, enabled
found-> vendor=0x8086, dev=0x1461, revid=0x04
bus=1, slot=28, func=0
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0030, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1460, revid=0x04
bus=1, slot=29, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0030, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x24 (9000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base f8101000, size 12, enabled
found-> vendor=0x8086, dev=0x1461, revid=0x04
bus=1, slot=30, func=0
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0030, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1460, revid=0x04
bus=1, slot=31, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0030, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x24 (9000 ns), maxlat=0x00 (0 ns)
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver
attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 29.0 on pci1
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver
attached)
pcib3: <PCIBIOS PCI-PCI bridge> at device 31.0 on pci1
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x3000-0x3fff
pcib3: memory decode 0xf8200000-0xf82fffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <PCI bus> on pcib3
pci3: physical bus=3
map[10]: type 1, range 64, base f8200000, size 17, enabled
map[20]: type 4, range 32, base 00003000, size 6, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 3:2 INTA BIOS irq 11
found-> vendor=0x8086, dev=0x1010, revid=0x01
bus=3, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base f8220000, size 17, enabled
map[20]: type 4, range 32, base 00003040, size 6, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 3:2 INTB BIOS irq 11
found-> vendor=0x8086, dev=0x1010, revid=0x01
bus=3, slot=2, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci3: <network, ethernet> at device 2.0 (no driver attached)
pci3: <network, ethernet> at device 2.1 (no driver attached)
pcib4: <PCIBIOS PCI-PCI bridge> at device 3.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 6
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xf8300000-0xf84fffff
pcib4: prefetched decode 0xfb000000-0xfdffffff
pci4: <PCI bus> on pcib4
pci4: physical bus=4
map[10]: type 1, range 32, base f8300000, size 12, enabled
found-> vendor=0x8086, dev=0x1461, revid=0x04
bus=4, slot=28, func=0
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0030, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1460, revid=0x04
bus=4, slot=29, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0030, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x24 (9000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base f8301000, size 12, enabled
found-> vendor=0x8086, dev=0x1461, revid=0x04
bus=4, slot=30, func=0
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0030, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1460, revid=0x04
bus=4, slot=31, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0030, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x24 (9000 ns), maxlat=0x00 (0 ns)
pci4: <base peripheral, interrupt controller> at device 28.0 (no driver
attached)
pcib5: <PCIBIOS PCI-PCI bridge> at device 29.0 on pci4
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfff00000-0xfffff
pcib5: prefetched decode 0xfff00000-0xfffff
pci5: <PCI bus> on pcib5
pci5: physical bus=5
pci4: <base peripheral, interrupt controller> at device 30.0 (no driver
attached)
pcib6: <PCIBIOS PCI-PCI bridge> at device 31.0 on pci4
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0xf000-0xfff
pcib6: memory decode 0xf8400000-0xf84fffff
pcib6: prefetched decode 0xfb000000-0xfdffffff
pci6: <PCI bus> on pcib6
pci6: physical bus=6
map[10]: type 1, range 32, base f8400000, size 20, enabled
map[14]: type 3, range 32, base fb000000, size 24, enabled
map[18]: type 3, range 32, base fc000000, size 25, enabled
pci_cfgintr_valid: BIOS irq 12 is valid
pci_cfgintr: 6:1 INTA BIOS irq 12
found-> vendor=0x1044, dev=0xa511, revid=0x01
bus=6, slot=1, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x2230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=12
powerspec 2 supports D0 D3 current D0
asr0: <Adaptec Caching SCSI RAID> mem
0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8400000-0xf84fffff irq 12 at
device 1.0 on pci6
asr0: major=154
pcib6: device asr0 requested decoded memory range 0xf8400000-0xf84fffff
pcib4: device asr0 requested decoded memory range 0xf8400000-0xf84fffff
pcib6: device asr0 requested decoded memory range 0xfb000000-0xfb400000
pcib4: device asr0 requested decoded memory range 0xfb000000-0xfb400000
asr0: ADAPTEC 2010S FW Rev. 3B05, 2 channel, 256 CCBs, Protocol I2O
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f
irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f
irq 10 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f
irq 5 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib7: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0x4000-0x4fff
pcib7: memory decode 0xf8500000-0xf9ffffff
pcib7: prefetched decode 0xfff00000-0xfffff
pci7: <PCI bus> on pcib7
pci7: physical bus=7
map[10]: type 1, range 32, base f9000000, size 24, enabled
map[14]: type 4, range 32, base 00004000, size 8, enabled
map[18]: type 1, range 32, base f8500000, size 12, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 7:1 INTA BIOS irq 11
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=7, slot=1, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci7: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port
0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1
on pci0
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0: reset tp2 mask=03 stat0=01 stat1=01 devices=0x0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=7f
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: reset tp2 mask=01 stat0=00 stat1=ff devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pnpbios: 20 devices, largest 164 bytes
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c02: adding fixed memory32 range 0xfebffc00-0xfebfffff, size=0x400
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe4000-0xfffff, size=0x1c000
PNP0c01: adding fixed memory32 range 0x100000-0xffffffff, size=0xfff00000
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 3 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0c02: adding memory32 range 0xe0000-0xe3fff, size=0x4000, align=0x4000
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x1000-0x105f, size=0x60, align=0x1
PNP0c02: adding io range 0x1060-0x107f, size=0x20, align=0x1
PNP0c02: adding io range 0x1180-0x11bf, size=0x40, align=0x1
pnpbios: handle 11 device ID PNP0c02 (020cd041)
INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
INT0800: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000
INT0800: adding fixed memory32 range 0xffa80000-0xffafffff, size=0x80000
INT0800: adding fixed memory32 range 0xffa00000-0xffa7ffff, size=0x80000
INT0800: adding fixed memory32 range 0xff980000-0xff9fffff, size=0x80000
INT0800: adding fixed memory32 range 0xff900000-0xff97ffff, size=0x80000
INT0800: adding fixed memory32 range 0xff880000-0xff8fffff, size=0x80000
INT0800: adding fixed memory32 range 0xff800000-0xff87ffff, size=0x80000
INT0800: adding fixed memory32 range 0xff000000-0xff07ffff, size=0x80000
pnpbios: handle 12 device ID INT0800 (0008d425)
PNP0c02: adding memory32 range 0xdc000-0xdffff, size=0x4000, align=0x4000
pnpbios: handle 13 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
pnpbios: handle 14 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xcf000-0xcffff, size=0x1000
pnpbios: handle 15 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
pnpbios: handle 17 device ID PNP0501 (0105d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x8
pnpbios: handle 18 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x1
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0x1
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x2
pnpbios: handle 21 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 23 device ID PNP0700 (0007d041)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem
0xe0000-0xe3fff,0xdc000-0xdffff,0xc9000-0xcefff,0xc8000-0xc8fff,0xc0000-0xc7fff
on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 50 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x80 specified. Nearest valid baseport is 0x100.
Failing probe.
>From: Jun Kuriyama <kuriyama@imgsrc.co.jp>
>To: "Stephane Raimbault" <segr@hotmail.com>
>CC: current@freebsd.org
>Subject: Re: 5.1-R and 5.1-C floppies will not boot on SuperMicro 6023P-8R
>Date: Tue, 04 Nov 2003 07:53:18 +0900
>
>At Mon, 3 Nov 2003 17:47:59 +0000 (UTC),
>Stephane Raimbault wrote:
> > >autoboot 10
> > Hit [Enter] to boot immediately, or any other key for command prompt.
> > Booting [/kernel]...
>
>I meant to use "-v" at above. Hit any key at this 10 seconds waiting,
>and type "boot -v" and enter at prompt.
>
>
>--
>Jun Kuriyama <kuriyama@imgsrc.co.jp> // IMG SRC, Inc.
> <kuriyama@FreeBSD.org> // FreeBSD Project
_________________________________________________________________
Add photos to your e-mail with MSN 8. Get 2 months FREE*.
http://join.msn.com/?page=features/photos&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Law10-F82Ddrg3DVocb0002169b>