Date: Tue, 03 Nov 2015 11:53:57 -0800 From: Russell Haley <russ.haley@gmail.com> To: Gavin Atkinson <gavin@FreeBSD.org>, freebsd-arm <freebsd-arm@freebsd.org> Cc: John Little <sbi.gaijin@gmail.com> Subject: Re: Hummingboard - How to use Images Message-ID: <20151103195357.4386898.26112.503@gmail.com> In-Reply-To: <alpine.BSF.2.20.1511020411590.97187@ury.york.ac.uk> References: <CAF2aYUeLKj-hzDVXFAMv3RaPEvTnJb24jvMNb_5yA0T0SrXm3A@mail.gmail.com> <20151028010235.4386898.86960.345@gmail.com> <CAF2aYUfSaDTO-HCOFVA-px2Z-7QELv%2BiQHJQ%2BbQUBhX0Z9G0dA@mail.gmail.com> <CABx9NuR_LMevE-4hS_45h96Nd-54XmPtF-bMKNNUuM0tq0_Tww@mail.gmail.com> <alpine.BSF.2.20.1511020411590.97187@ury.york.ac.uk>
index | next in thread | previous in thread | raw e-mail
Well technically your correct. It's an option on the i2eX and i4Pro SOM not on the carrier board. Broadcom BCM4330. Their specification claims b/g/n but if you read the wiki it only supports 2.4 Ghz. http://solid-run.com/freescale-imx6-family/imx6-som/imx6-som-specifications/ http://wiki.solid-run.com/doku.php?id=products:imx6:microsom:btwifi Russ Sent from my BlackBerry 10 smartphone on the Koodo network. Original Message From: Gavin Atkinson Sent: Tuesday, November 3, 2015 11:22 AM To: Russell Haley Cc: John Little Subject: Re: Hummingboard - How to use Images As far as I can tell, the Hummingboard doesn't have wifi? Thanks, Gavin On Tue, 27 Oct 2015, Russell Haley wrote: > Ha ha. I've spent weeks pouring over my own build trying to make it work. I > was even trying to figure out how to get the kernel debugger working. I had > the latest image booted in less than 30 minutes. > > Okay, so I've booted but no wi-fi adapter. What kernel module do I load > for the wi-fi? > > On Tue, Oct 27, 2015 at 9:42 PM, John Little <sbi.gaijin@gmail.com> wrote: > > > Yup, it's all rolled in there. Easy (once you get past the messed-up dtb > > file name). > > > > > > On 28 October 2015 at 10:02, Russell Haley <russ.haley@gmail.com> wrote: > > > >> Sweet! So u-boot is already part of the image? > >> > >> Sent from my BlackBerry 10 smartphone on the Koodo network. > >> *From: *John Little > >> *Sent: *Tuesday, October 27, 2015 6:07 AM > >> *To: *russ.haley@gmail.com > >> *Subject: *Re: Hummingboard - How to use Images > >> > >> Russ, > >> > >> "dd"ing with no special options should work okay. I think you already > >> know > >> about the DTB file-name problem which Ian talked about a while back. > >> I haven't tried the latest builds (late October) from the web site > >> yet, so that > >> might already be fixed, but just in case, here's some info on the > >> CuBox-i4p > >> which is basically the same hardware:- > >> > >> > >> https://esp8266hints.wordpress.com/2015/10/23/a-non-esp8266-aside-getting-freebsd-10-2-to-boot-on-the-cubox-i4p/ > >> > >> You can check the exact spelling of the DTB file-names using "ls > >> .boot/dtb" from > >> the loader prompt. > >> > >> > >> -John- > >> > >> > >> > > > _______________________________________________ > freebsd-doc@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-doc > To unsubscribe, send any mail to "freebsd-doc-unsubscribe@freebsd.org" >help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20151103195357.4386898.26112.503>