Date: Mon, 05 Nov 2007 21:06:13 -0500 From: "Aryeh M. Friedman" <aryeh.friedman@gmail.com> To: d@delphij.net Cc: freebsd-current@freebsd.org, Justin Hibbits <jrh29@alumni.cwru.edu> Subject: Re: [ANNOUNCEMENT] Wiki for discussing P35/IHC9(R)/SATA issues set up Message-ID: <472FCC15.9040903@gmail.com> In-Reply-To: <472F5D9A.9050900@delphij.net> References: <472D56A1.7070206@gmail.com> <200711041119.45971.jrh29@alumni.cwru.edu> <472DD231.9030501@gmail.com> <472E67CC.9040201@delphij.net> <472E4FF0.3080801@gmail.com> <472EB211.7050001@delphij.net> <472EEADF.1000008@gmail.com> <472F466E.8050405@delphij.net> <472F5846.1020304@gmail.com> <472F5D9A.9050900@delphij.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks for the attention... but I feel this is rather repeative and
useless at best... what I mean it is like your classic scene in American
cop shows where the victim get's fed up with answering questions and
wants to know when the cops will get back to solving the case.
Sorry for not including the output of verbose boot logging but dmesg
truncated some of it... how do I save the entire log?
> Yes, please. These information is very important for knowing how to
>
> change the situation, thanks.
>
I have included comments by placing them on the line below with two
leading tabs and ****
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Tue Oct 30 18:07:21 UTC 2007
root@:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz (3005.68-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
**** p35/ihc9 chipset
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20000800<SYSCALL,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 4282322944 (4083 MB)
avail memory = 4128833536 (3937 MB)
ACPI APIC Table: <052107 APIC1013>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <052107 RSDT1013> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 86,
should be 79 [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 92a092a0600092a
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 92a092a0600092a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
uhci0: <UHCI (generic) USB controller> port 0xcc00-0xcc1f irq 16 at
device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 21 at
device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfcdffc00-0xfcdfffff irq
18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <GENERIC ATA controller> port
0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f
mem 0xfceffc00-0xfcefffff irq 16 at device 0.0 on pci3
atapci0: [ITHREAD]
*** whereis ata1 ???
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
*** HDD
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
*** CD
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem
0xfcfff000-0xfcffffff irq 17 at device 0.0 on pci4
re0: Using 2 MSI messages
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
re0: Ethernet address: 00:19:db:b5:f8:0f
re0: [FILTER]
re0: [FILTER]
uhci2: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 23 at
device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 19 at
device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 18 at
device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xc080-0xc09f irq 16 at
device 29.3 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfcdff800-0xfcdffbff irq
23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb3 usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 8 ports with 8 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> mem
0xfd000000-0xfdffffff,0xf0000000-0xf7ffffff irq 17 at device 1.0 on pci5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port
0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f,0xb400-0xb40f
irq 19 at device 31.2 on pci0
*** Speed is correct
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port
0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
irq 19 at device 31.5 on pci0
*** Speed is correct
atapci2: [ITHREAD]
ata6: <ATA channel 0> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: [ITHREAD]
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio0: [FILTER]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on acpi0
fdc0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Microsoft Comfort Optical Mouse 1000, class 0/0, rev 2.00/1.21,
addr 2> on uhub1
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <TSSTcorpCD/DVDW SH-S183L/SB01> at ata4-master SATA150
ad10: 476940MB <Seagate ST3500630AS 3.AAE> at ata5-master SATA150
*** Both speeds are incorrect should be SATA300 (btw pre-path
RELENG_6 reports UDMA33)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad10s1a
hostb0@pci0:0:0:0: class=0x060000 card=0x73601462 chip=0x29c08086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '(Bearlake) Processor to I/O Controller'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x00008086 chip=0x29c18086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '(Bearlake) PCIe Root Port'
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:26:0: class=0x0c0300 card=0x73601462 chip=0x29378086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:26:1: class=0x0c0300 card=0x73601462 chip=0x29388086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:26:7: class=0x0c0320 card=0x73601462 chip=0x293c8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
pcm0@pci0:0:27:0: class=0x040300 card=0x73601462 chip=0x293e8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) HD Audio Controller'
class = multimedia
pcib2@pci0:0:28:0: class=0x060400 card=0x73601462 chip=0x29408086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 1'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:4: class=0x060400 card=0x73601462 chip=0x29488086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 5'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:28:5: class=0x060400 card=0x73601462 chip=0x294a8086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 6'
class = bridge
subclass = PCI-PCI
uhci2@pci0:0:29:0: class=0x0c0300 card=0x73601462 chip=0x29348086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci3@pci0:0:29:1: class=0x0c0300 card=0x73601462 chip=0x29358086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci4@pci0:0:29:2: class=0x0c0300 card=0x73601462 chip=0x29368086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci5@pci0:0:29:3: class=0x0c0300 card=0x73601462 chip=0x29398086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
ehci1@pci0:0:29:7: class=0x0c0320 card=0x73601462 chip=0x293a8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
pcib5@pci0:0:30:0: class=0x060401 card=0x73601462 chip=0x244e8086 rev=0x92 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x73601462 chip=0x29188086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB (ICH9) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci1@pci0:0:31:2: class=0x01018f card=0x73601462 chip=0x29218086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) 2 port Serial ATA Storage Controller 1'
class = mass storage
subclass = ATA
none0@pci0:0:31:3: class=0x0c0500 card=0x73601462 chip=0x29308086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) SMBus Controller'
class = serial bus
subclass = SMBus
atapci2@pci0:0:31:5: class=0x010185 card=0x73601462 chip=0x29268086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) 2 port Serial ATA Storage Controller 2'
class = mass storage
subclass = ATA
atapci0@pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab rev=0xb1 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
device = '6121 SATA2 Controller'
class = mass storage
subclass = ATA
re0@pci0:4:0:0: class=0x020000 card=0x360c1462 chip=0x816810ec rev=0x01 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
class = network
subclass = ethernet
vgapci0@pci0:5:1:0: class=0x030000 card=0xb3093842 chip=0x032210de rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
device = 'GeForce FX 5200 [NV34.3]'
class = display
subclass = VGA
--
Aryeh M. Friedman
Developer, not business, friendly
http://www.flosoft-systems.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?472FCC15.9040903>