Date: Sun, 16 Apr 2000 02:13:00 -0400 From: Rod Taylor <rbt@zort.on.ca> To: freebsd-stable@freebsd.org Subject: BurnCD Message-ID: <20000416021300.A3353@peon.zort.on.ca>
next in thread | raw e-mail | index | archive | help
Problems fixating with BurnCD. dmesg below...
bash-2.03# burncd -f /dev/acd0c -s 4 -e -t data 4.0-install.iso fixate
..
fixating CD, please wait..
burncd: ioctl(CDRIOCCLOSEDISK): Input/output error
--
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 4.0-STABLE #3: Mon Apr 10 18:56:33 EDT 2000
rbt@king.zort.on.ca:/usr/src/sys/compile/KING
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
avail memory = 127049728 (124072K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 10
IOAPIC #0 intpin 17 -> irq 12
IOAPIC #0 intpin 18 -> irq 11
IOAPIC #0 intpin 19 -> irq 5
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02eb000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 5
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7.3 on pci0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xd400-0xd41f mem
0xe9000000-0xe90fffff,0xe9100000-0xe9100fff irq 12 at device 13.0 on
pci0
fxp0: Ethernet address 00:90:27:29:4b:ff
pci0: <NVidia/SGS-Thomson Riva128 graphics accelerator> at 15.0 irq 10
atapci1: <HighPoint HPT366 ATA66 controller> port
0xe000-0xe0ff,0xdc00-0xdc03,0xd800-0xd807 irq 11 at device 19.0 on pci0
ata2: at 0xd800 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port
0xec00-0xecff,0xe800-0xe803,0xe400-0xe407 irq 11 at device 19.1 on pci0
ata3: at 0xe400 on atapci2
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad4: 19569MB <WDC WD205AA> [39761/16/63] at ata2-master using UDMA33
ad6: 9671MB <IBM-DTTA-351010> [19650/16/63] at ata3-master using UDMA33
ad7: 8056MB <SAMSUNG VG38404A> [16368/16/63] at ata3-slave using UDMA33
acd0: CD-RW <CD-RW CRX100E> at ata0-master using WDMA2
Mounting root from ufs:/dev/ad4s1a
module_register: module netgraph already exists!
linker_file_sysinit "netgraph.ko" failed to register! 17
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to deny, logging disabled
acd0: READ_TOC - ILLEGAL REQUEST asc=24 ascq=00 error=04
acd0: WRITE_BIG - MEDIUM ERROR asc=0c ascq=09 error=04
acd0: CLOSE_TRACK/SESSION - ILLEGAL REQUEST asc=24 ascq=00 error=04
acd0: WRITE_BIG - MEDIUM ERROR asc=0c ascq=09 error=04
acd0: CLOSE_TRACK/SESSION - ILLEGAL REQUEST asc=24 ascq=00 error=04
pid 810 (burncd), uid 0: exited on signal 3 (core dumped)
acd0: sequence error (disk already open)
acd0: sequence error (disk already open)
acd0: sequence error (disk already open)
acd0: sequence error (disk already open)
acd0: sequence error (disk already open)
Attempted several times in a row (all of which failed of course).
--
Rod Taylor
Zort can do it soon...
--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000416021300.A3353>