Date: Sat, 15 Dec 2001 15:29:07 +0300 From: "Denis B. Mashkov" <Denis.B.Mashkov@f18.n5069.z2.fidonet.org> To: "stable@freebsd.org" <stable%freebsd.org@f400.n5020.z2.fidonet.org> Subject: <none> Message-ID: <1008419825@f18.n5069.z2.ftn>
next in thread | raw e-mail | index | archive | help
Hello. I have a problem with FreeBSD 4.4
I made a new kernel with ex driver
device ex0 at isa? port 0x220 irq 5
then turned off PnP in card Intel EtherExpress (TM) 10
Kernel found my card , but wrote :
ifmedia_set : no match for 0x23/0xffffffff
ifmedia_set : panic
reboot after 15s
What the metter ? What i'll must do ?
Please help!!!!!
ps My config. :
=== Cut #!/shell/dmesg ===
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #1: Fri Dec 14 22:36:42 MSK 2001
root@node18.net:/usr/src/sys/compile/DEN
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (200.46-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x544 Stepping = 4
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 50331648 (49152K bytes)
avail memory = 45350912 (44288K bytes)
Preloaded elf kernel "kernel" at 0xc0378000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc037809c.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fd940
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device
7.3 on pci0
pci0: <ATI Mach64-VT graphics accelerator> at 9.0
ahc0: <Adaptec aic7860 Ultra SCSI adapter> port 0x6400-0x64ff mem
0xe1000000-0xe1000fff irq 10 at device 12.0 on pci0
ahc0: Using left over BIOS settings
aic7860: Ultra Single Channel A, SCSI Id=7, 3/255 SCBs
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xccfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ex: no card found at 0x220
ata0-slave: ata_command: timeout waiting for intr
ata0-slave: identify failed
ad0: 40MB <ST351A/X> [980/5/17] at ata0-master PIO1
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 2 lun 0
da0: <WDIGTL ENTERPRISE 1.61> Fixed Direct Access SCSI-2 device
Now i delete card from computer , if i take it back , kernel do not load
;(
--
Den aka _BlackDog_ [tea&education rlz] [Bill G. MD ] [LMD]
{068 ab 2657} [*NIX/*BSD rlz] [girls rlz] [logos rlz] [ ;)) rlz ]
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1008419825>