Date: Thu, 18 Mar 1999 10:57:20 +0100 (CET) From: Markus Egle <egle@ai-lab.fh-furtwangen.de> To: aic7xxx@FreeBSD.ORG Subject: Re: AIC 7890/1 Ultra 2 under Linux Message-ID: <Pine.LNX.4.02.9903180946390.1791-100000@phi.ai-lab.fh-furtwangen.de> In-Reply-To: <Pine.LNX.4.02.9903171055001.2012-100000@gamma.ai-lab.fh-furtwangen.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 17 Mar 1999, Markus Egle wrote: > I have the same problem. I couldn't install RedHat5.2 (2.0.36) (mount > failed, after scanning the scsi-bus). > RedHat5.1 (2.0.34) aic7xxx-5.1.10 was successful. > > Trying the 2.2.[0-2] showed the same problem. Adding some boot-options, > like: aic7xxx=no_reset aic7xxx=extended aic7xxx=no_probe didn't help. > > I've tried booting without any CDROMS and on both Channels, tested > some options of the SCSI-Adapter, limited the speed, checked the > termination several times, .... HD is a DGVS and not a DRVS, sorry. Now I tried again with 2.2.2 and 5.1.12 and without LUN (already had it in 2.2.1) I still get an kernel panic. : : (scsi 0:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 8. (scsi 0= BRKADRINT error (0x20): Scratch Ram/SCB Array Ram Parity error (scsi 0) SEQADDR = 0x15c (scsi 0= BRKADRINT error (0x20): Scratch Ram/SCB Array Ram Parity error (scsi 0) SEQADDR = 0x166 (scsi 0= BRKADRINT error (0x20): Scratch Ram/SCB Array Ram Parity error (scsi 0) SEQADDR = 0x178 (scsi 0= BRKADRINT error (0x20): Scratch Ram/SCB Array Ram Parity error (scsi 0) SEQADDR = 0x179 (scsi 0= BRKADRINT error (0x20): Scratch Ram/SCB Array Ram Parity error (scsi 0) SEQADDR = 0xc4 (scsi 0= BRKADRINT error (0x20): Scratch Ram/SCB Array Ram Parity error (scsi 0) SEQADDR = 0x153 SCSI device sda: hdwr sector= 512 bytes Sectors= 17829870 [8705MB] [8,7GB] Partition check: sda: sda1 sda3 sda4 <sda5 sda6 sda7> Freeing unused kernel memory: 36k freed Kernel panic: aic7xxx: AWAITING_MSG for an SCB that does not have a waiting message In swapper task - not syncing I'm wondering why there is a difference between downloading sequencer code 2.2.2 > (scsi0) Downloading sequencer code... 404 instructions downloaded 2.0.34> (scsi0) Downloading sequencer code... 413 instructions downloaded other error-messages and config-files at http://www.ai-lab.fh-furtwangen.de/~egle/kernel_probs.html Any ideas, Markus Egle To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.02.9903180946390.1791-100000>