Date: Thu, 22 Dec 2005 23:21:58 +0100 From: Wilko Bulte <wb@freebie.xs4all.nl> To: =?iso-8859-1?Q?S=F8ren?= Schmidt <sos@deepcore.dk> Cc: freebsd-current@FreeBSD.ORG Subject: Promise TX2300 results Message-ID: <20051222222158.GA726@freebie.xs4all.nl> In-Reply-To: <20051215214129.GA11777@freebie.xs4all.nl> References: <20051215194325.49909.qmail@web35908.mail.mud.yahoo.com> <43A1CCFE.10705@FreeBSD.org> <20051215201737.GA10846@freebie.xs4all.nl> <43A1D51D.7070804@deepcore.dk> <20051215211842.GA11418@freebie.xs4all.nl> <43A1DF77.4040307@deepcore.dk> <20051215214129.GA11777@freebie.xs4all.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Dec 15, 2005 at 10:41:29PM +0100, Wilko Bulte wrote.. > On Thu, Dec 15, 2005 at 10:26:15PM +0100, Sren Schmidt wrote.. > > Wilko Bulte wrote: > > > > >>All RAID1's that ATA supports are sofware based, any controller can do > > >>here, unless you want to boot from it, you'd go for one that has BIOS > > >>support for RAID like the Promise TX2200.. > > > > > >Well, yes, booting is the issue yes. Seems in .NL TX2200 has become a rare > > >breed. Would a TX2300 also do? > > > > It should, I might not have all the PCI ID's in there yet (new ones keep > > popping up), but the support code is there, just needs the PCI ID in > > case its not found. > > OK. I ordered a 2300 and will let you know what develops :) Promise made, promise kept, the Promise TX2300 card was delivered today. RELENG_6 tapci0@pci2:13:0: class=0x010400 card=0x3570105a chip=0x3570105a rev=0x02 hdr=0x00 vendor = 'Promise Technology Inc' class = mass storage subclass = RAID atapci0: <Promise PDC20580 SATA150 controller> port 0xd480-0xd4ff,0xd000-0xd0ff mem 0xf7ff6000-0xf7ff6fff,0xf7fc0000-0xf7fdffff irq 21 at device 13.0 on pci2 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 The chip is marked: PDC20771 (not 20580). With ataraid in the kernel: ar0: 238418MB <Promise Fasttrak RAID1> status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master So first impression is that it 'Just Works'. Anything specific I should try? -- Wilko Bulte wilko@FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051222222158.GA726>