Date: Thu, 4 Oct 2001 08:53:34 +0200 From: Andreas Klemm <andreas@FreeBSD.ORG> To: =?iso-8859-1?Q?S=F8ren_Schmidt?= <sos@freebsd.dk> Cc: stable@FreeBSD.ORG Subject: burncd blank freezes system for a while Message-ID: <20011004085334.A50784@titan.klemm.gtn.com>
next in thread | raw e-mail | index | archive | help
--X1bOJ3K7DJ5YkBrT
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Hi S=F8ren,
first of all thanks for your fine burncd program. It is always my last
chance when burning audio CD's under windows 2000 fails (even with
the latest Nero and other software). Its a pity, that commercial
programs don't do the job well...
My problem: whenever I blank a CD-RW, it freezes my system for a while
(perhaps ~5-10 seconds). Mouse cursor freezes under X11. But its not
during the complete blank operation.
Am I the only one bitten by this ?
To tell you the truth, I didn't do much research on this, because FreeBSD
always returns to normal operation after the freeze ...
All I can say is, that it happens whenever I have to blank a CD-RW,
NOT if I burn a CD-R.
But now I have the feeling, I should report this ;-)
What more data do you need ? How long exactly ???
The command I use to burn images is:
burncd -s 4 -f /dev/acd1c blank data /data/FreeBSD.cdrom1.isofs fixate
BTW, this is not release dependend, when I installed FreeBSD 4.3 months
ago it was also present and still in the last FreeBSD 4.4-STABLE.
And please notice the swap pager syslog output that is written
during burning, see below ...
Thanks
Andreas ///
FreeBSD titan.klemm.gtn.com 4.4-STABLE FreeBSD 4.4-STABLE #0: Sun Sep 30 00=
:14:26 CEST 2001 root@titan.klemm.gtn.com:/usr/src/sys/compile/TITAN i=
386
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #0: Sun Sep 30 00:14:26 CEST 2001
root@titan.klemm.gtn.com:/usr/src/sys/compile/TITAN
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 997460271 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (997.46-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x686 Stepping =3D 6
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 268419072 (262128K bytes)
avail memory =3D 257855488 (251812K bytes)
Preloaded elf kernel "kernel" at 0xc0344000.
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc02e0382 (1000022)
VESA: NVidia
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00f0eb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on =
pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia GeForce2 GTS graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on =
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 4.2 irq 5
pci0: <VIA 83C572 USB controller> at 4.3 irq 5
pcm0: <Creative CT5880-D> port 0xb800-0xb83f irq 9 at device 5.0 on pci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xb400-0xb4ff mem 0xed800000-0=
xed800fff irq 9 at device 9.0 on pci0
aic7880: Ultra Single Channel A, SCSI Id=3D7, 16/255 SCBs
pcm1: <Creative EMU10K1> port 0xb000-0xb01f irq 5 at device 10.0 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa400-0xa43f mem 0xec800000-0=
xec8fffff,0xed000000-0xed000fff irq 10 at device 11.0 on pci0
fxp0: Ethernet address 00:d0:b7:ba:c1:c2
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xcb7ff,0xcc000-0xcc7ff,0xd0000-0xd0ff=
f on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0x8 on isa0
ppc0: SMC-like chipset (ECP-only) in ECP mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 970C> MLC,PCL,PML
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
imm0: NIBBLE mode unavailable!
ad0: 38166MB <ST340823A> [77545/16/63] at ata0-master UDMA66
ad2: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata1-master UDMA66
acd0: DVD-ROM <LITEON DVD-ROM LTD122> at ata0-slave using PIO4
acd1: CD-RW <SONY CD-RW CRX140E> at ata1-slave using PIO4
Waiting 8 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad2s1a
pcm1: sample rate tracker lock status change
pcm1: sample rate tracker lock status change
pcm1: sample rate tracker lock status change
pcm1: sample rate tracker lock status change
pcm1: sample rate tracker lock status change
pcm1: sample rate tracker lock status change
pcm1: sample rate tracker lock status change
pcm1: sample rate tracker lock status change
swap_pager: indefinite wait buffer: device: #ad/0x20011, blkno: 107072, siz=
e: 24576
swap_pager: indefinite wait buffer: device: #ad/0x20011, blkno: 107072, siz=
e: 24576
swap_pager: indefinite wait buffer: device: #ad/0x20011, blkno: 92928, size=
: 8192
Andreas ///
--=20
Andreas Klemm - Powered by FreeBSD
Need a magic printfilter today ? http://www.apsfilter.org/
Songs from our band >> 64Bits << http://members.aol.com/II64BitsII/
Inofficial band pages with add-on stuff http://www.apsfilter.org/64bits.ht=
ml
--X1bOJ3K7DJ5YkBrT
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (FreeBSD)
Comment: Weitere Infos: siehe http://www.gnupg.org
iD8DBQE7vAdsd3o+lGxvbLoRAn33AJ9DiZzGqNKT8wO3otrQGQSItG2mfACfZX6X
2GW8u87+jrYPiD65iL1qBOc=
=CwAp
-----END PGP SIGNATURE-----
--X1bOJ3K7DJ5YkBrT--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011004085334.A50784>