Date: Tue, 10 Feb 2004 16:02:09 -0500 From: bcsfd204@twcny.rr.com To: Andre Guibert de Bruet <andy@siliconlandmark.com> Cc: current@freebsd.org Subject: Re: Missing XL0 and USB printer after upgrade (long response, sorry) Message-ID: <2d05912cf211.2cf2112d0591@nyroc.rr.com>
next in thread | raw e-mail | index | archive | help
----- Original Message ----- From: Andre Guibert de Bruet <andy@siliconlandmark.com> Date: Tuesday, February 10, 2004 6:59 am Subject: Re: Missing XL0 and USB printer after upgrade > > On Tue, 10 Feb 2004 bcsfd204@twcny.rr.com wrote: > > > I upgraded two systems over the weekend (2/6-7/04). I came up > from a 5.1-CURRENT level from around October, 2003. Both are Tyan > dual AMD processor systems with built in XL class ethernet cardss. > I reviewed UPDATING and I believe I followed the instructions for > the multi-terabyte changes. The desktop kernel and world went > without much of a problem (except nautilus keeps crashing on a > segment fault. I think I have to upgrade Gnome but I was going to > do that later.) > > > > I then went to upgrade the server. When I finished booting the > machine, XL0 and my USB attached printer were not recognized > (present).> > > IFCONFIG does not show XL0 and ls /dev does not show my USB printer. > > > > I played with the kernel config (the two machines are almost > identical (currently defined but disabled SCSI controller in the > server machine)) I also tried SCHED_ULE and SCHED_4BSD and it did > not seem to change anything. > > > > What I am noticing for the printer is, I get most of the probe > messages but then I start getting the messages about the > filesystems being clean and root being mounted. During this > portion of the boot, I get messages about the USB hardware being > probed.> > > It's almost like the hardware probing is not done yet before the > kernel startes to mount the filesystems and begin initialization. > (If I mangled the process here I'm sorry. I'm trying to describe > what the external symptoms look like.) > > > > When I review DMESG output, there is nothing present for the XL- > class ethernet interfaces. I also tried adding a VX-class card I > had in the closet but this is not detected either. > > > > At the moment, I'm less concerned about the printer. I'm going > nowhere with this server box if I cannot get it back on the wire. > > I forgot to ask in my last email, does 'pciconf -vl' show your network > device? Is it prefixed by noneX@pci...? > > Regards, > Andy > > > Andre Guibert de Bruet | Enterprise Software Consultant > > > Silicon Landmark, LLC. | http://siliconlandmark.com/ > > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current- > unsubscribe@freebsd.org" Andy, Your questions got me playing and I was manually able to configure my xl0 interface and ping my firewall toaster (SMC Baracade.) Another person commented about mibus. I know these 3Com chips need miibus but I do not know about the USB printer. The reason I mention this is there is another thread on current that just started talking about a floppy install of 5.2.1-RC failing and the failures all used miibus. It is titled "5.2.1-RC floppy install: many if_X.ko modules failed to load" and the last line reads: "It looks like miibus is having some sort of problem: the modules that complain are all dependent on it." I'm mentioning it for what it is worth... Anyway... I started with a fresh boot of the machine and copied what I found to floppy so I would not risk a typo on my wife's W98 PC. the boot -v got me the following: \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 0.9.0 \\_SB_.PCI0.LNKC irq 5: [ 3 5 10 11] low,level,sharable 0.9.1 \\_SB_.PCI0.LNKA irq 11: [ 3 5 10 11] low,level,sharable 0.9.2 \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 0.9.3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled map[14]: type 3, range 32, base f6200000, size 12, enabled map[18]: type 4, range 32, base 00001010, size 2, port disabled found-> vendor=0x1022, dev=0x700c, revid=0x11 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x700d, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7440, revid=0x05 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000f000, size 4, enabled found-> vendor=0x1022, dev=0x7441, revid=0x04 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7443, revid=0x03 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x16 (660 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7448, revid=0x05 bus=0, slot=16, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0017, statreg=0x2220, cachelnsz=0 (dwords) lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) agp0: <AMD 762 host to AGP bridge> port 0x1010-0x1013 mem 0xf6200000-0xf6200fff,0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M agp0: gatt -> ag_pdir 0x2d0000 agp0: allocating GATT for 16384 AGP page entries pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfff00000-0xfffff pcib1: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 1.5.0 \\_SB_.PCI0.LNKC irq 5: [ 3 5 10 11] low,level,sharable 1.5.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 1.5.0 \\_SB_.PCI0.LNKC irq 5: [ 3 5 10 11] low,level,sharable 1.5.1 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 768 UDMA100 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x2000-0x2fff pcib2: memory decode 0xf4000000-0xf5ffffff pcib2: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ \\_SB_.PCI0.LNKA irq 11: [ 3 5 10 11] low,level,sharable 2.4.0 \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 2.4.1 \\_SB_.PCI0.LNKC irq 5: [ 3 5 10 11] low,level,sharable 2.4.2 \\_SB_.PCI0.LNKD irq 10: [ 3 5 10 11] low,level,sharable 2.4.3 \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 2.5.0 \\_SB_.PCI0.LNKC irq 5: [ 3 5 10 11] low,level,sharable 2.5.1 \\_SB_.PCI0.LNKD irq 10: [ 3 5 10 11] low,level,sharable 2.5.2 \\_SB_.PCI0.LNKA irq 11: [ 3 5 10 11] low,level,sharable 2.5.3 \\_SB_.PCI0.LNKC irq 5: [ 3 5 10 11] low,level,sharable 2.6.0 \\_SB_.PCI0.LNKD irq 10: [ 3 5 10 11] low,level,sharable 2.6.1 \\_SB_.PCI0.LNKA irq 11: [ 3 5 10 11] low,level,sharable 2.6.2 \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 2.6.3 \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 2.7.0 \\_SB_.PCI0.LNKC irq 5: [ 3 5 10 11] low,level,sharable 2.8.0 \\_SB_.PCI0.LNKD irq 10: [ 3 5 10 11] low,level,sharable 2.9.0 \\_SB_.PCI0.LNKA irq 11: [ 3 5 10 11] low,level,sharable 2.0.0 \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 2.0.1 \\_SB_.PCI0.LNKC irq 5: [ 3 5 10 11] low,level,sharable 2.0.2 \\_SB_.PCI0.LNKD irq 10: [ 3 5 10 11] low,level,sharable 2.0.3 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.LNKA irq 11: [ 3 5 10 11] low,level,sharable 2.4.0 \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 2.4.1 \\_SB_.PCI0.LNKC irq 5: [ 3 5 10 11] low,level,sharable 2.4.2 \\_SB_.PCI0.LNKD irq 10: [ 3 5 10 11] low,level,sharable 2.4.3 \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 2.5.0 \\_SB_.PCI0.LNKC irq 5: [ 3 5 10 11] low,level,sharable 2.5.1 \\_SB_.PCI0.LNKD irq 10: [ 3 5 10 11] low,level,sharable 2.5.2 \\_SB_.PCI0.LNKA irq 11: [ 3 5 10 11] low,level,sharable 2.5.3 \\_SB_.PCI0.LNKC irq 5: [ 3 5 10 11] low,level,sharable 2.6.0 \\_SB_.PCI0.LNKD irq 10: [ 3 5 10 11] low,level,sharable 2.6.1 \\_SB_.PCI0.LNKA irq 11: [ 3 5 10 11] low,level,sharable 2.6.2 \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 2.6.3 \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 2.7.0 \\_SB_.PCI0.LNKC irq 5: [ 3 5 10 11] low,level,sharable 2.8.0 \\_SB_.PCI0.LNKD irq 10: [ 3 5 10 11] low,level,sharable 2.9.0 \\_SB_.PCI0.LNKA irq 11: [ 3 5 10 11] low,level,sharable 2.0.0 \\_SB_.PCI0.LNKB irq 9: [ 3 5 10 11] low,level,sharable 2.0.1 \\_SB_.PCI0.LNKC irq 5: [ 3 5 10 11] low,level,sharable 2.0.2 \\_SB_.PCI0.LNKD irq 10: [ 3 5 10 11] low,level,sharable 2.0.3 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base f4008000, size 12, enabled pcib2: matched entry for 2.0.INTD (source \\_SB_.PCI0.LNKD) pcib2: slot 0 INTD is routed to irq 10 found-> vendor=0x1022, dev=0x7449, revid=0x07 bus=2, slot=0, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=10 map[10]: type 4, range 32, base 00002830, size 3, enabled map[14]: type 4, range 32, base 00002824, size 2, enabled map[18]: type 4, range 32, base 00002828, size 3, enabled map[1c]: type 4, range 32, base 00002820, size 2, enabled map[20]: type 4, range 32, base 00002800, size 4, enabled map[24]: type 1, range 32, base f4000000, size 14, enabled pcib2: matched entry for 2.4.INTA (source \\_SB_.PCI0.LNKA) pcib2: slot 4 INTA is routed to irq 11 found-> vendor=0x105a, dev=0x4d69, revid=0x02 bus=2, slot=4, func=0 class=01-80-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0430, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 4, range 32, base 00002848, size 3, enabled map[14]: type 4, range 32, base 0000283c, size 2, enabled map[18]: type 4, range 32, base 00002840, size 3, enabled map[1c]: type 4, range 32, base 00002838, size 2, enabled map[20]: type 4, range 32, base 00002810, size 4, enabled map[24]: type 1, range 32, base f4004000, size 14, enabled pcib2: matched entry for 2.5.INTA (source \\_SB_.PCI0.LNKB) pcib2: slot 5 INTA is routed to irq 9 found-> vendor=0x105a, dev=0x4d69, revid=0x02 bus=2, slot=5, func=0 class=01-80-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0430, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns) intpin=a, irq=9 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 1, range 32, base f5000000, size 24, enabled map[14]: type 4, range 32, base 00002000, size 8, enabled map[18]: type 1, range 32, base f4009000, size 12, enabled found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=2, slot=7, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00002400, size 7, enabled map[14]: type 1, range 32, base f400a000, size 7, enabled pcib2: matched entry for 2.8.INTA (source \\_SB_.PCI0.LNKC) pcib2: slot 8 INTA is routed to irq 5 found-> vendor=0x10b7, dev=0x9805, revid=0x78 bus=2, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00002480, size 7, enabled map[14]: type 1, range 32, base f400a400, size 7, enabled pcib2: matched entry for 2.9.INTA (source \\_SB_.PCI0.LNKD) pcib2: slot 9 INTA is routed to irq 10 found-> vendor=0x10b7, dev=0x9805, revid=0x78 bus=2, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pci2: <serial bus, USB> at device 0.0 (no driver attached) atapci1: <Promise PDC20269 UDMA133 controller> port 0x2800-0x280f,0x2820-0x2823,0x2828-0x282f,0x2824-0x2827,0x2830-0x2837 mem 0xf4000000-0xf4003fff irq 11 at device 4.0 on pci2 pcib2: device atapci1 requested decoded I/O range 0x2800-0x280f atapci1: [MPSAFE] pcib2: device atapci1 requested decoded I/O range 0x2830-0x2837 pcib2: device atapci1 requested decoded I/O range 0x2824-0x2827 pcib2: device atapci1 requested decoded I/O range 0x2826-0x2826 ata2: reset tp1 mask=03 ostat0=50 ostat1=50 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ata2: at 0x2830 on atapci1 ata2: [MPSAFE] pcib2: device atapci1 requested decoded I/O range 0x2828-0x282f pcib2: device atapci1 requested decoded I/O range 0x2820-0x2823 pcib2: device atapci1 requested decoded I/O range 0x2822-0x2822 ata3: reset tp1 mask=03 ostat0=50 ostat1=50 ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ata3: at 0x2828 on atapci1 ata3: [MPSAFE] atapci2: <Promise PDC20269 UDMA133 controller> port 0x2810-0x281f,0x2838-0x283b,0x2840-0x2847,0x283c-0x283f,0x2848-0x284f mem 0xf4004000-0xf4007fff irq 9 at device 5.0 on pci2 pcib2: device atapci2 requested decoded I/O range 0x2810-0x281f atapci2: [MPSAFE] pcib2: device atapci2 requested decoded I/O range 0x2848-0x284f pcib2: device atapci2 requested decoded I/O range 0x283c-0x283f pcib2: device atapci2 requested decoded I/O range 0x283e-0x283e ata4: reset tp1 mask=03 ostat0=20 ostat1=50 ata4-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20 ata4-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata4: reset tp2 mask=03 stat0=20 stat1=50 devices=0x2<ATA_SLAVE> ata4: at 0x2848 on atapci2 ata4: [MPSAFE] pcib2: device atapci2 requested decoded I/O range 0x2840-0x2847 pcib2: device atapci2 requested decoded I/O range 0x2838-0x283b pcib2: device atapci2 requested decoded I/O range 0x283a-0x283a ata5: reset tp1 mask=03 ostat0=20 ostat1=30 ata5-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20 ata5-slave: stat=0x30 err=0x30 lsb=0x30 msb=0x30 ata5: reset tp2 mask=03 stat0=20 stat1=30 devices=0x0 ata5: at 0x2840 on atapci2 ata5: [MPSAFE] pci2: <display, VGA> at device 7.0 (no driver attached) pci2: <network, ethernet> at device 8.0 (no driver attached) pci2: <network, ethernet> at device 9.0 (no driver attached) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) sio0: irq maps: 0x2001 0x2011 0x2001 0x2001 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x2001 0x2009 0x2001 0x2001 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 vpo0: can't connect to the drive imm0: (disconnect) s1=0x80 s2=0x80, s3=0x0 imm0: (connect) s1=0x80 s2=0x80, s3=0x0 imm0: (connect) s1=0x80 s2=0x80, s3=0x0 imm0: (connect) s1=0x80 s2=0x80, s3=0x0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 mss_detect, busy still set (0xff) acpi_cpu1: <CPU> port 0x530-0x537 on acpi0 device_probe_and_attach: acpi_cpu1 attach returned 6 mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xcb800-0xcf7ff,0xc9000-0xcb7ff,0xc8800-0xc8fff,0xc8000-0xc87ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1533399219 Hz quality 800 Timecounters tick every 10.000 msec DUMMYNET initialized (011031) ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 5 packets/entry by default IPv6 packet filtering initialized, logging limited to 5 packets/entry lo0: bpf attached ata1: spurious interrupt - status=0x50 error=0x01 ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on AMD 768 chip ata0-master: setting UDMA100 on AMD 768 chip ata0-slave: setting PIO4 on AMD 768 chip ata0-slave: setting UDMA100 on AMD 768 chip ad0: <Maxtor 2R015H1/EAH41MF0> ATA-6 disk at ata0-master ad0: 14305MB (29297520 sectors), 29065 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 [0] f:80 typ:6 s(CHS):0/1/1 e(CHS):506/15/63 s:63 l:510993 [1] f:00 typ:165 s(CHS):507/0/1 e(CHS):1023/15/63 s:511056 l:28786464 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 261628416 end 261660671 GEOM: Configure ad0s2, start 261660672 length 14738669568 end 15000330239 ad1: <WDC WD1200JB-00DUA3/75.13B75> ATA-6 disk at ata0-slave ad1: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ata1-slave: pio=0x0c wdma=0x22 udma=0x46 cable=80pin ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata1-master: setting PIO4 on AMD 768 chip ata1-master: setting UDMA100 on AMD 768 chip ata1-slave: setting PIO4 on AMD 768 chip ata1-slave: setting UDMA100 on AMD 768 chip ad2: <MAXTOR 4K080H4/A08.1500> ATA-5 disk at ata1-master ad2: 76319MB (156301487 sectors), 155060 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, UDMA100 ad3: <Maxtor 6Y200P0/YAR41VW0> ATA-7 disk at ata1-slave ad3: 194481MB (398297088 sectors), 395136 C, 16 H, 63 S, 512 B ad3: 16 secs/int, 1 depth queue, UDMA100 GEOM: Configure ad0s2a, start 0 length 262144000 end 262143999 GEOM: Configure ad0s2b, start 262144000 length 2147483648 end 2409627647 GEOM: Configure ad0s2c, start 0 length 14738669568 end 14738669567 GEOM: Configure ad0s2d, start 2409627648 length 12329041920 end 14738669567 GEOM: new disk ad1 GEOM: new disk ad2 GEOM: new disk ad3 ata2-slave: pio=0x0c wdma=0x22 udma=0x44 cable=80pin ata2-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin ata2-master: setting PIO4 on Promise PDC20269 chip ata2-master: setting UDMA66 on Promise PDC20269 chip ata2-slave: setting PIO4 on Promise PDC20269 chip ata2-slave: setting UDMA66 on Promise PDC20269 chip ad4: <WDC WD84AA/29.05T29> ATA-4 disk at ata2-master ad4: 8063MB (16514064 sectors), 16383 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, UDMA66 ad5: <WDC WD450AA-00BAA0/10.09K11> ATA-4 disk at ata2-slave ad5: 42934MB (87930864 sectors), 87233 C, 16 H, 63 S, 512 B ad5: 16 secs/int, 1 depth queue, UDMA66 ata3-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata3-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin ata3-master: setting PIO4 on Promise PDC20269 chip ata3-master: setting UDMA66 on Promise PDC20269 chip ata3-slave: setting PIO4 on Promise PDC20269 chip ata3-slave: setting UDMA100 on Promise PDC20269 chip ad6: <WDC WD450AA-00BAA0/10.09K11> ATA-4 disk at ata3-master ad6: 42934MB (87930864 sectors), 87233 C, 16 H, 63 S, 512 B ad6: 16 secs/int, 1 depth queue, UDMA66 ad7: <WDC WD400BB-00DEA0/05.03E05> ATA-5 disk at ata3-slave ad7: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B ad7: 16 secs/int, 1 depth queue, UDMA100 ata4-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata4-slave: setting PIO4 on Promise PDC20269 chip ata4-slave: setting UDMA100 on Promise PDC20269 chip ad9: <WDC WD1200BB-00CAA0/16.06V16> ATA-5 disk at ata4-slave ad9: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad9: 16 secs/int, 1 depth queue, UDMA100 [0] f:00 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17189487 [1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:17189550 l:217246995 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad1s1, start 32256 length 8801017344 end 8801049599 GEOM: Configure ad1s2, start 8801049600 length 111230461440 end 120031511039 [0] f:00 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:156296322 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad2s1, start 32256 length 80023716864 end 80023749119 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:398283417 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad3s1, start 32256 length 203921109504 end 203921141759 GEOM: new disk ad4 GEOM: new disk ad5 GEOM: new disk ad6 GEOM: new disk ad7 GEOM: new disk ad9 GEOM: Configure ad1s1a, start 0 length 268435456 end 268435455 GEOM: Configure ad1s1b, start 268435456 length 2130657280 end 2399092735 GEOM: Configure ad1s1c, start 0 length 8801017344 end 8801017343 GEOM: Configure ad1s1d, start 2399092736 length 268435456 end 2667528191 GEOM: Configure ad1s1e, start 2667528192 length 268435456 end 2935963647 GEOM: Configure ad1s1f, start 2935963648 length 5865053696 end 8801017343 GEOM: Configure ad1s2b, start 0 length 2147483648 end 2147483647 GEOM: Configure ad1s2c, start 0 length 111230461440 end 111230461439 GEOM: Configure ad1s2d, start 2147483648 length 109082977792 end 111230461439 GEOM: Configure ad2s1b, start 0 length 2147483648 end 2147483647 GEOM: Configure ad2s1c, start 0 length 80023716864 end 80023716863 GEOM: Configure ad2s1d, start 2147483648 length 77876233216 end 80023716863 GEOM: Configure ad3s1c, start 0 length 203921109504 end 203921109503 GEOM: Configure ad3s1d, start 0 length 203921109504 end 203921109503 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:16514001 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad4s1, start 32256 length 8455168512 end 8455200767 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):192/15/63 s:63 l:87930801 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad5s1, start 32256 length 45020570112 end 45020602367 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:87923682 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad6s1, start 32256 length 45016925184 end 45016957439 [0] f:00 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78156162 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad7s1, start 32256 length 40015954944 end 40015987199 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad9s1, start 32256 length 120031478784 end 120031511039 GEOM: Configure ad4s1b, start 0 length 8455168512 end 8455168511 GEOM: Configure ad4s1c, start 0 length 8455168512 end 8455168511 GEOM: Configure ad5s1a, start 8192 length 45020561920 end 45020570111 GEOM: Configure ad5s1c, start 0 length 45020570112 end 45020570111 GEOM: Configure ad6s1c, start 0 length 45016925184 end 45016925183 GEOM: Configure ad6s1d, start 0 length 23541579776 end 23541579775 GEOM: Configure ad6s1e, start 23541579776 length 5368709120 end 28910288895 GEOM: Configure ad6s1f, start 28910288896 length 5368709120 end 34278998015 GEOM: Configure ad6s1g, start 34278998016 length 10737927168 end 45016925183 GEOM: Configure ad7s1c, start 0 length 40015954944 end 40015954943 GEOM: Configure ad7s1d, start 0 length 40015954944 end 40015954943 GEOM: Configure ad9s1c, start 0 length 120031478784 end 120031478783 GEOM: Configure ad9s1d, start 0 length 120031478784 end 120031478783 Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init Accounting enabled ohci0: <OHCI (generic) USB controller> mem 0xf4008000-0xf4008fff irq 10 at device 0.0 on pci2 pcib2: device ohci0 requested decoded memory range 0xf4008000-0xf4008fff usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered Linux ELF exec handler installed fd0: autoselected 1440 KB medium I then did kldstat/kldload/kldstat and got the following: P3R-272# kldstat Id Refs Address Size Name 1 10 0xc0400000 3c0580 kernel 2 1 0xc07c1000 483f8 acpi.ko 3 1 0xc678b000 20000 usb.ko 4 2 0xc67ed000 9000 ibcs2.ko 5 1 0xc67f8000 3000 ibcs2_coff.ko 6 1 0xc6803000 16000 linux.ko P3R-272# kldload /boot/kernel/if_xl.ko P3R-272# kldstat Id Refs Address Size Name 1 14 0xc0400000 3c0580 kernel 2 1 0xc07c1000 483f8 acpi.ko 3 1 0xc678b000 20000 usb.ko 4 2 0xc67ed000 9000 ibcs2.ko 5 1 0xc67f8000 3000 ibcs2_coff.ko 6 1 0xc6803000 16000 linux.ko 7 1 0xc74ac000 9000 if_xl.ko P3R-272# exit exit Script done on Tue Feb 10 15:33:47 2004 pciconf -vl got me the following: agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x700c1022 rev=0x11 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'AMD-762 CPU to PCI Bridge (SMP chipset)' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x700d1022 rev=0x00 hdr=0x01 vendor = 'Advanced Micro Devices (AMD)' device = 'AMD-762 CPU to PCI Bridge (AGP 4x)' class = bridge subclass = PCI-PCI isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x74401022 rev=0x05 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'AMD-768 PCI to ISA/LPC Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:7:1: class=0x01018a card=0x74411022 chip=0x74411022 rev=0x04 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'AMD-768 EIDE Controller' class = mass storage subclass = ATA none0@pci0:7:3: class=0x068000 card=0x74431022 chip=0x74431022 rev=0x03 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'AMD-768 System Management' class = bridge subclass = PCI-unknown pcib2@pci0:16:0: class=0x060400 card=0x00000000 chip=0x74481022 rev=0x05 hdr=0x01 vendor = 'Advanced Micro Devices (AMD)' device = 'AMD-768 PCI Bridge' class = bridge subclass = PCI-PCI ohci0@pci2:0:0: class=0x0c0310 card=0x74491022 chip=0x74491022 rev=0x07 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'AMD-768 USB Controller' class = serial bus subclass = USB atapci1@pci2:4:0: class=0x018085 card=0x4d68105a chip=0x4d69105a rev=0x02 hdr=0x00 vendor = 'Promise Technology Inc' device = 'PDC20269 Ultra133 TX2 EIDE Controller' class = mass storage atapci2@pci2:5:0: class=0x018085 card=0x4d68105a chip=0x4d69105a rev=0x02 hdr=0x00 vendor = 'Promise Technology Inc' device = 'PDC20269 Ultra133 TX2 EIDE Controller' class = mass storage none1@pci2:7:0: class=0x030000 card=0x80081002 chip=0x47521002 rev=0x27 hdr=0x00 vendor = 'ATI Technologies' device = 'Rage XL PCI' class = display subclass = VGA none2@pci2:8:0: class=0x020000 card=0x246210f1 chip=0x980510b7 rev=0x78 hdr=0x00 vendor = '3COM Corp, Networking Division' device = '3C980-TX 10/100baseTX NIC [Python-T]' class = network subclass = ethernet none3@pci2:9:0: class=0x020000 card=0x246210f1 chip=0x980510b7 rev=0x78 hdr=0x00 vendor = '3COM Corp, Networking Division' device = '3C980-TX 10/100baseTX NIC [Python-T]' class = network subclass = ethernet Attached is my kernel config for good measure: machine i386 cpu I686_CPU ident P3R-272 maxusers 0 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options PANIC_REBOOT_WAIT_TIME=-1 #options SCHED_4BSD #Select legacy scheduler options SCHED_ULE #Select SMP-friendly scheduler options SC_HISTORY_SIZE=5000 #Number of history buffer lines options SC_NORM_ATTR="(FG_GREEN|BG_BLACK)" options SC_NORM_REV_ATTR="(FG_BLACK|BG_GREEN)" options SC_KERNEL_CONS_ATTR="(FG_CYAN|BG_BLACK)" options SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_CYAN)" options INET #InterNETworking options INET6 #IPv6 communications protocols options IPFIREWALL #Enable firewall options IPFIREWALL_VERBOSE #Log firewall activity... options IPFIREWALL_VERBOSE_LIMIT="5" #within limits options IPV6FIREWALL #Enable IPv6 firewall options IPV6FIREWALL_VERBOSE #Log IPv6 firewall activity... options IPV6FIREWALL_VERBOSE_LIMIT="5" #within limits options DUMMYNET #Enable bandwidth throttling, et. al. options IPDIVERT #Needed for NATD options GEOM_BDE #Enable encrypted disk partitions options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options MD_ROOT #MD is a potential root device options NFSCLIENT #Network Filesystem Client options NFSSERVER #Network Filesystem Server options NFS_ROOT #NFS usable as root device, requires NFSCLIENT options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with FreeBSD4 options COMPAT_AOUT #Enable i386 a.out binary support options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug messages options AHD_REG_PRETTY_PRINT # Print register bitfields in debug messages # Debugging for use in -current #options DDB #Enable the kernel debugger options INVARIANTS #Enable calls of extra sanity checking options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS options WITNESS #Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed options SMP # Symmetric MultiProcessor Kernel device apic # Symmetric (APIC) I/O device isa device pci device fdc device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering device ahc # AHA2940 and onboard AIC7xxx devices device scbus # SCSI bus (required) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support device sc device agp # support several AGP chipsets device npx device pcm # Generic sound support device sbc # Creative, Advance and ESS sound cards device apm device pmtimer device sio # 8250, 16[45]50 based serial ports device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device device vpo # Requires scbus and da device miibus # MII bus support device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') device vx # 3Com 3c590 (***TEMPORARY***) device random # Entropy device device loop # Network loopback device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) device bpf # Berkeley packet filter device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device urio # Diamond Rio 500 MP3 player device uscanner # Scanners device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) Thanks again for the help.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2d05912cf211.2cf2112d0591>