Date: Sun, 9 Sep 2001 13:51:56 -0700 (PDT) From: Andrew Lankford <mirage9_1999@yahoo.com> To: Andrew Lankford <arlankfo@mindspring.com>, freebsd-ports@FreeBSD.org, mirage9_1999@yahoo.com, freebsd-stable@FreeBSD.org Subject: Re: Problem with either usb mouse and RC-4 or usb mouse and XFree86-4.1 Message-ID: <20010909205156.44432.qmail@web14605.mail.yahoo.com> In-Reply-To: <200109092035.QAA21653@hall.mail.mindspring.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Whoops... looks like I've wasted some bandwidth. I rolled a new XF86Config file using "XFree86 -configure" (it actually worked without crashing-- hot damn!) and it's working normally again. Darned if I know what it was with my old configuration that gummed up the works, but... Andrew Lankford --- Andrew Lankford <arlankfo@mindspring.com> wrote: > > > I've been using my three button Kensington USB mouse > with > FreeBSD4.3-STABLE, and it has run before on XFree86 > 4.1 with no > problems. I've just upgraded to RC4 (complete > binary install), > recompiled the kernel, and built XFree86 4.1 from > ports. Circumstances > have changed. > > The problem I'm having seems to appear only in X. > Regardless what > window manager I use, response to mouse clicks is > either sluggish > or nonexistent. Console (i.e. ttyv0) cut and paste > functions work > just fine, so my guess would be that someone > recently made some > changes to the the XFree86 4.1 port or... your guess > is as good as > mine (and most welcome). > > Here's my boot log below, for what it's worth. > You'll notice that the kernel has trouble with the > uhci1 hub due to some sort of conflict with my > modem, but my mouse is the only usb device I've got > and is connected to uhci0. > > Any ideas? Thanks in advance > > > Andrew Lankford > > > Copyright (c) 1992-2001 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, > 1991, 1992, 1993, 1994 > The Regents of the University of California. All > rights reserved. > FreeBSD 4.4-RC4 #0: Sun Sep 9 00:28:32 EDT 2001 > root@bogushost2:/usr/src/sys/compile/ARL0801 > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium III/Pentium III Xeon/Celeron > (737.02-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x686 Stepping = 6 > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory = 267300864 (261036K bytes) > config> q > avail memory = 257159168 (251132K bytes) > Preloaded elf kernel "kernel" at 0xc0315000. > Preloaded userconfig_script "/boot/kernel.conf" at > 0xc031509c. > Preloaded elf module "vesa.ko" at 0xc03150ec. > Preloaded elf module "green_saver.ko" at 0xc0315188. > Preloaded elf module "snd_es137x.ko" at 0xc031522c. > Preloaded elf module "snd_pcm.ko" at 0xc03152d0. > Preloaded elf module "usb.ko" at 0xc0315370. > Preloaded elf module "ugen.ko" at 0xc031540c. > Preloaded elf module "uhid.ko" at 0xc03154a8. > Preloaded elf module "ums.ko" at 0xc0315544. > Preloaded elf module "md.ko" at 0xc03155e0. > VESA: v3.0, 1024k memory, flags:0x1, mode > table:0xc02c4282 (1000022) > VESA: Intel(R) 815 Chipset Video BIOS > Pentium Pro MTRR support enabled > md0: Malloc disk > Using $PIR table, 10 entries at 0xc00f1310 > apm0: <APM BIOS> on motherboard > apm: found APM BIOS v1.2, connected at v1.2 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > pci0: <Intel model 1132 VGA-compatible display > device> at 2.0 irq 11 > pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> > at device 30.0 on pci0 > pci1: <PCI bus> on pcib1 > xl0: <3Com 3c905C-TX Fast Etherlink XL> port > 0xd800-0xd87f mem 0xf6800000-0xf680007f irq 5 at > device 12.0 on pci1 > xl0: Ethernet address: 00:01:02:73:ee:49 > miibus0: <MII bus> on xl0 > xlphy0: <3c905C 10/100 internal PHY> on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, > 100baseTX-FDX, auto > sio0: <3COM PCI FaxModem> port 0xd400-0xd407 irq 9 > at device 13.0 on pci1 > sio0: type 16550A > pcm0: <Creative CT5880-C> port 0xd000-0xd03f irq 4 > at device 14.0 on pci1 > isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> > at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH2 ATA100 controller> port > 0xb800-0xb80f at device 31.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <Intel 82801BA/BAM (ICH2) USB controller > USB-A> port 0xb400-0xb41f irq 3 at device 31.2 on > pci0 > usb0: <Intel 82801BA/BAM (ICH2) USB controller > USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev > 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > ums0: vendor 0x0603 USB Mouse STD. , rev 1.00/1.00, > addr 2, iclass 3/1 > ums0: 3 buttons > ichsmb0: <Intel 82801BA (ICH2) SMBus controller> > port 0xe800-0xe80f irq 10 at device 31.3 on pci0 > smbus0: <System Management Bus> on ichsmb0 > smb0: <SMBus general purpose I/O> on smbus0 > uhci1: <Intel 82801BA/BAM (ICH2) USB controller > USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on > pci0 > uhci1: Could not allocate irq > device_probe_and_attach: uhci1 attach returned 6 > orm0: <Option ROMs> at iomem > 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd07ff on > isa0 > fdc0: <NEC 72065B or clone> at port > 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port > 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem > 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > ppc0: cannot reserve I/O port range > pcf0: can't reserve irq, polled mode. > pcf0: <PCF8584 I2C bus controller> at port > 0x320-0x321 irq 5 on isa0 > iicbus0: <Philips I2C bus> on pcf0 addr 0xaa > iicsmb0: <I2C to SMB bridge> on iicbus0 > smbus1: <System Management Bus> on iicsmb0 > smb1: <SMBus general purpose I/O> on smbus1 > iic0: <I2C general purpose I/O> on iicbus0 > ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at > ata0-master tagged UDMA100 > acd0: CD-RW <PLEXTOR CD-R PX-W8432T> at ata1-master > using WDMA2 > Mounting root from ufs:/dev/ad0s3a > uhci1: <Intel 82801BA/BAM (ICH2) USB controller > USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on > pci0 > uhci1: Could not allocate irq > device_probe_and_attach: uhci1 attach returned 6 > uhci1: <Intel 82801BA/BAM (ICH2) USB controller > USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on > pci0 > uhci1: Could not allocate irq > device_probe_and_attach: uhci1 attach returned 6 > uhci1: <Intel 82801BA/BAM (ICH2) USB controller > USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on > pci0 > uhci1: Could not allocate irq > device_probe_and_attach: uhci1 attach returned 6 > uhci1: <Intel 82801BA/BAM (ICH2) USB controller > USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on > pci0 > uhci1: Could not allocate irq > device_probe_and_attach: uhci1 attach returned 6 > uhci1: <Intel 82801BA/BAM (ICH2) USB controller > USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on > pci0 > uhci1: Could not allocate irq > device_probe_and_attach: uhci1 attach returned 6 > agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem > 0xf7000000-0xf707ffff,0xf8000000-0xfbffffff irq 11 > at device 2.0 on pci0 > uhci1: <Intel 82801BA/BAM (ICH2) USB controller > USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on > pci0 > uhci1: Could not allocate irq > device_probe_and_attach: uhci1 attach returned 6 > > > > > > __________________________________________________ Do You Yahoo!? Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger http://im.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010909205156.44432.qmail>