Date: Fri, 17 Oct 2008 05:26:51 +0000 (UTC) From: Pyun YongHyeon <yongari@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r183966 - head/sys/dev/mii Message-ID: <200810170526.m9H5QpbL079414@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: yongari Date: Fri Oct 17 05:26:51 2008 New Revision: 183966 URL: http://svn.freebsd.org/changeset/base/183966 Log: Some 88E1149 PHY's page select is initialized to point to other bank instead of copper/fiber bank which in turn resulted in wrong registers were accessed during PHY operation. It is believed that page 0 should be used for copper PHY so reinitialize E1000_EADR to select default copper PHY. This fixes link establishment issue of nfe(4) on Sun Fire X4140. OpenBSD also has similimar patch but they just reset the E1000_EADR register to page 0. However some Marvell PHYs((88E3082, 88E1000) don't have the extended address register and the meaning of the register is quite different for each PHY model. So selecting copper PHY is limited to 88E1149 PHY which seems to be the only one that exhibits link establishment problem. If parent device know the type of PHY(either copper or fiber) that information should be notified to PHY driver but there is no good way to pass this information yet. Reported by: thompsa Reviewed by: thompsa Modified: head/sys/dev/mii/e1000phy.c Modified: head/sys/dev/mii/e1000phy.c ============================================================================== --- head/sys/dev/mii/e1000phy.c Fri Oct 17 03:59:25 2008 (r183965) +++ head/sys/dev/mii/e1000phy.c Fri Oct 17 05:26:51 2008 (r183966) @@ -153,6 +153,20 @@ e1000phy_attach(device_t dev) if (PHY_READ(sc, E1000_ESSR) & E1000_ESSR_FIBER_LINK) sc->mii_flags |= MIIF_HAVEFIBER; break; + case MII_MODEL_MARVELL_E1149: + /* + * Some 88E1149 PHY's page select is initialized to + * point to other bank instead of copper/fiber bank + * which in turn resulted in wrong registers were + * accessed during PHY operation. It is believed that + * page 0 should be used for copper PHY so reinitialize + * E1000_EADR to select default copper PHY. If parent + * device know the type of PHY(either copper or fiber), + * that information should be used to select default + * type of PHY. + */ + PHY_WRITE(sc, E1000_EADR, 0); + break; case MII_MODEL_MARVELL_E3082: /* 88E3082 10/100 Fast Ethernet PHY. */ sc->mii_anegticks = MII_ANEGTICKS;
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200810170526.m9H5QpbL079414>