Date: Wed, 3 Feb 2016 12:50:34 -0500 From: Allan Jude <allanjude@freebsd.org> To: freebsd-performance@freebsd.org Subject: Re: ixgbe: Network performance tuning (#TCP connections) Message-ID: <56B23DEA.1060307@freebsd.org> In-Reply-To: <EC88118611AE564AB0B10C6A4569004D0137D57AEB@HOBEX11.hob.de> References: <EC88118611AE564AB0B10C6A4569004D0137D57AEB@HOBEX11.hob.de>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --] On 2016-02-03 08:37, Meyer, Wolfgang wrote: > Hello, > > we are evaluating network performance on a DELL-Server (PowerEdge R930 with 4 Sockets, hw.model: Intel(R) Xeon(R) CPU E7-8891 v3 @ 2.80GHz) with 10 GbE-Cards. We use programs that on server side accepts connections on a IP-address+port from the client side and after establishing the connection data is sent in turns between server and client in a predefined pattern (server side sends more data than client side) with sleeps in between the send phases. The test set-up is chosen in such way that every client process initiates 500 connections handled in threads and on the server side each process representing an IP/Port pair also handles 500 connections in threads. > > The number of connections is then increased and the overall network througput is observed using nload. On FreeBSD (on server side) roughly at 50,000 connections errors begin to occur and the overall throughput won't increase further with more connections. With Linux on the server side it is possible to establish more than 120,000 connections and at 50,000 connections the overall throughput ist double that of FreeBSD with the same sending pattern. Furthermore system load on FreeBSD is much higher with 50 % system usage on each core and 80 % interrupt usage on the 8 cores handling the interrupt queues for the NIC. In comparison Linux has <10 % system usage, <10 % user usage and about 15 % interrupt usage on the 16 cores handling the network interrupts for 50,000 connections. > > Varying the numbers for the NIC interrupt queues won't change the performance (rather worsens the situation). Disabling Hyperthreading (utilising 40 cores) degrades the performance. Increasing MAXCPU to utilise all 80 cores won't improve compared to 64 cores, atkbd and uart had to be disabled to avoid kernel panics with increased MAXCPU (thanks to Andre Oppermann for investigating this). Initiallly the tests were made on 10.2 Release, later I switched to 10 Stable (later with ixgbe driver version 3.1.0) but that didn't change the numbers. > > Some sysctl configurables were modified along the network performance guidelines found on the net (e.g. https://calomel.org/freebsd_network_tuning.html, https://www.freebsd.org/doc/handbook/configtuning-kernel-limits.html, https://pleiades.ucsc.edu/hyades/FreeBSD_Network_Tuning) but most of them didn't have any measuarable impact. Final sysctl.conf and loader.conf settings see below. Actually the only tunables that provided any improvement were identified to be hw.ix.txd, and hw.ix.rxd that were reduced (!) to the minimum value of 64 and hw.ix.tx_process_limit and hw.ix.rx_process_limit that were set to -1. > > Any ideas what tunables might be changed to get a higher number of TCP connections (it's not a question of the overall throughput as changing the sending pattern allows me to fully utilise the 10Gb bandwidth)? How can I determine where the kernel is spending its time that causes the high CPU load? Any pointers are highly appreciated, I can't believe that there is such a blatant difference in network performance compared to Linux. > > Regards, > Wolfgang > I wonder if this might be NUMA related. Specifically, it might help to make sure that the 8 CPU cores that the NIC queues are pinned to, are on the same CPU that is backing the PCI-E slot that the NIC is in. -- Allan Jude [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (MingW32) iQIcBAEBAgAGBQJWsj3tAAoJEBmVNT4SmAt+CgIP/2pcubjW1rIy5T91UFIuztD7 kNj5hF7H5C8/h3U998OwCMPAgRJKfnOjDybVaHb3QNwGYKsMiAUietVbFTF4k928 oR8HxD/xuNYMpdicVeB48winvEOA8ilaFjbaKYE4dNX7XaNk/5+610PrRRkwJfuE dN96ycI83nrEMJFHJFFu88bnfrjX0oP26AlqsN2G8hqExQwPVERgLniNN59cx/9x 4aUQO8w4W62PWvc63x5/rjMVKBjlnnAxt89kGq6doCseLWkrdnQHhr2rlha3vEG5 zEQyPTcoN+kb2wxzpnSBWppxZ9mGdCDmz2HyLMD0nF8ypTgJIMl4OuhfPPWHS+i4 ogRQkq3UWyUtjQhd+ZF8lXGYkzyDR1yf9vAS7r/RxkJFCcvr7SVZO+ADDzkMbt9S jz+re8irH+pV1fAEA4NFYPeQL8ngs96Y37sjH/nZovuUDT6elUmwBcMxzbQTC44r c0xpPfkcH8c0lqg6OYUrIqoQULVjCr5swriq6lb8ygfpLHzcgyAeZHiAyQGo0fDb ieXI9uJ2RGXVYslX+cCfxypz22Y7ULfKzQjeeuf4Z80DdX7AnfvgOqeRikncFv6Q zg+dNc2dbSOs5zywPYScmSpFZjVMh1MJG7g1Y8Uig1BY5+JJ7Bqztis9i9drCmyE YDu7R9zyqEr2VAKVy2s/ =nUC0 -----END PGP SIGNATURE-----help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?56B23DEA.1060307>