Date: Fri, 12 Apr 2002 18:14:53 -0700 From: Chris Child <cpc35@pacbell.net> To: freebsd-hardware@freebsd.org Subject: Logitech iFeel USB mouse attach error Message-ID: <000801c1e288$9f491100$0700a8c0@spiderman>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--Boundary_(ID_7v9gtYPqa4G9uuSkAUvpfg)
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 7BIT
Hi. I'm new to freebsd, and am having some trouble getting my mouse to
work.
I installed the 4.5-mini .iso. After booting, everything appeared to be
working fine except for my mouse. I have a Logitech iFeel USB mouse. In
dmesg, I can see and error after recognizing it (device_probe_and_attach:
ums0 attach returned 6). I'm attached my kernel config file (JACKICE) and
the dmesg output (dmesg.log).
As a secondary question, dmesg seems to show the result of three boots, one
with the GENERIC kernel, and two with my new kernel. Is this supposed to
be? Thanks.
-Chris Child
Thanks in advance, and I'm not sure if it's standard practice on these
message lists, but please cc a copy of the reply to me.
--Boundary_(ID_7v9gtYPqa4G9uuSkAUvpfg)
Content-type: application/octet-stream; name=dmesg.log
Content-transfer-encoding: quoted-printable
Content-disposition: attachment; filename=dmesg.log
Copyright (c) 1992-2002 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.5-RELEASE #0: Mon Jan 28 14:31:56 GMT 2002=0A=
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CPU: AMD Athlon(tm) processor (1007.05-MHz 686-class CPU)=0A=
Origin =3D "AuthenticAMD" Id =3D 0x642 Stepping =3D 2=0A=
=
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>=0A=
AMD Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!>=0A=
real memory =3D 134152192 (131008K bytes)=0A=
avail memory =3D 125870080 (122920K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc0496000.=0A=
Pentium Pro MTRR support enabled=0A=
md0: Malloc disk=0A=
Using $PIR table, 10 entries at 0xc00fdc20=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pcib0: <AMD-761 host to PCI bridge> on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
pcib1: <AMD-761 PCI-PCI (4x AGP) bridge> at device 1.0 on pci0=0A=
pci1: <PCI bus> on pcib1=0A=
pci1: <NVidia Riva Vanta TNT2 graphics accelerator> at 5.0 irq 10=0A=
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <VIA 82C686 ATA100 controller> port 0xd400-0xd40f at device 7.1 =
on pci0=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device =
7.2 on pci0=0A=
usb0: <VIA 83C572 USB controller> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2=0A=
uhub1: 4 ports with 4 removable, self powered=0A=
ums0: Logitech, Inc. iFeel Mouse, rev 1.00/1.01, addr 3, iclass 3/1=0A=
device_probe_and_attach: ums0 attach returned 6=0A=
ugen0: Logitech, Inc. iFeel Mouse, rev 1.00/1.01, addr 3=0A=
ugen0: setting configuration index 0 failed=0A=
device_probe_and_attach: ugen0 attach returned 6=0A=
uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 11 at device =
7.3 on pci0=0A=
usb1: <VIA 83C572 USB controller> on uhci1=0A=
usb1: USB revision 1.0=0A=
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub2: 2 ports with 2 removable, self powered=0A=
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0=0A=
chip2: <VIA 82C686 AC97 Audio> port =
0xe800-0xe803,0xe400-0xe403,0xe000-0xe0ff irq 12 at device 7.5 on pci0=0A=
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem =
0xdd000000-0xdd00007f irq 11 at device 9.0 on pci0=0A=
xl0: Ethernet address: 00:01:03:cd:6e:86=0A=
miibus0: <MII bus> on xl0=0A=
ukphy0: <Generic IEEE 802.3u media interface> on miibus0=0A=
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
orm0: <Option ROM> at iomem 0xcc000-0xcc7ff on isa0=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio1: type 16550A=0A=
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A=
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/8 bytes threshold=0A=
plip0: <PLIP network interface> on ppbus0=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
ad0: 58644MB <IBM-DTLA-307060> [119150/16/63] at ata0-master UDMA100=0A=
acd0: DVD-ROM <SAMSUNG DVD-ROM SD-612> at ata1-master using PIO4=0A=
afd0: 0MB <IOMEGA ZIP 250 ATAPI> [0/64/32] at ata1-slave using PIO3=0A=
Mounting root from ufs:/dev/ad0s3a=0A=
fd0c: hard error reading fsbn 16 of 16-31 (No status)=0A=
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck=0A=
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped=0A=
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped=0A=
Waiting (max 60 seconds) for system process `syncer' to stop...stopped=0A=
=0A=
syncing disks... =0A=
done=0A=
Copyright (c) 1992-2002 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.5-RELEASE-p2 #3: Fri Apr 12 17:13:40 PDT 2002=0A=
root@jackice.PACBELL.net:/usr/src/sys/compile/JACKICE=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CPU: AMD Athlon(tm) processor (1007.05-MHz 686-class CPU)=0A=
Origin =3D "AuthenticAMD" Id =3D 0x642 Stepping =3D 2=0A=
=
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>=0A=
AMD Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!>=0A=
real memory =3D 134152192 (131008K bytes)=0A=
avail memory =3D 127131648 (124152K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc0362000.=0A=
Pentium Pro MTRR support enabled=0A=
md0: Malloc disk=0A=
Using $PIR table, 10 entries at 0xc00fdc20=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pcib0: <AMD-761 host to PCI bridge> on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
pcib1: <AMD-761 PCI-PCI (4x AGP) bridge> at device 1.0 on pci0=0A=
pci1: <PCI bus> on pcib1=0A=
pci1: <NVidia Riva Vanta TNT2 graphics accelerator> at 5.0 irq 10=0A=
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <VIA 82C686 ATA100 controller> port 0xd400-0xd40f at device 7.1 =
on pci0=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device =
7.2 on pci0=0A=
usb0: <VIA 83C572 USB controller> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2=0A=
uhub1: 4 ports with 4 removable, self powered=0A=
ums0: Logitech, Inc. iFeel Mouse, rev 1.00/1.01, addr 3, iclass 3/1=0A=
device_probe_and_attach: ums0 attach returned 6=0A=
ugen0: Logitech, Inc. iFeel Mouse, rev 1.00/1.01, addr 3=0A=
ugen0: setting configuration index 0 failed=0A=
device_probe_and_attach: ugen0 attach returned 6=0A=
uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 11 at device =
7.3 on pci0=0A=
usb1: <VIA 83C572 USB controller> on uhci1=0A=
usb1: USB revision 1.0=0A=
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub2: 2 ports with 2 removable, self powered=0A=
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0=0A=
chip2: <VIA 82C686 AC97 Audio> port =
0xe800-0xe803,0xe400-0xe403,0xe000-0xe0ff irq 12 at device 7.5 on pci0=0A=
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem =
0xdd000000-0xdd00007f irq 11 at device 9.0 on pci0=0A=
xl0: Ethernet address: 00:01:03:cd:6e:86=0A=
miibus0: <MII bus> on xl0=0A=
ukphy0: <Generic IEEE 802.3u media interface> on miibus0=0A=
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
orm0: <Option ROM> at iomem 0xcc000-0xcc7ff on isa0=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio1: type 16550A=0A=
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A=
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/8 bytes threshold=0A=
plip0: <PLIP network interface> on ppbus0=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
ad0: 58644MB <IBM-DTLA-307060> [119150/16/63] at ata0-master UDMA100=0A=
acd0: DVD-ROM <SAMSUNG DVD-ROM SD-612> at ata1-master using PIO4=0A=
afd0: 0MB <IOMEGA ZIP 250 ATAPI> [0/64/32] at ata1-slave using PIO3=0A=
Mounting root from ufs:/dev/ad0s3a=0A=
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped=0A=
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped=0A=
Waiting (max 60 seconds) for system process `syncer' to stop...stopped=0A=
=0A=
syncing disks... =0A=
done=0A=
Copyright (c) 1992-2002 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.5-RELEASE-p2 #4: Fri Apr 12 17:22:04 PDT 2002=0A=
root@jackice.PACBELL.net:/usr/src/sys/compile/JACKICE=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CPU: AMD Athlon(tm) processor (1007.05-MHz 686-class CPU)=0A=
Origin =3D "AuthenticAMD" Id =3D 0x642 Stepping =3D 2=0A=
=
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>=0A=
AMD Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!>=0A=
real memory =3D 134152192 (131008K bytes)=0A=
avail memory =3D 127131648 (124152K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc0362000.=0A=
Pentium Pro MTRR support enabled=0A=
md0: Malloc disk=0A=
Using $PIR table, 10 entries at 0xc00fdc20=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pcib0: <AMD-761 host to PCI bridge> on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
pcib1: <AMD-761 PCI-PCI (4x AGP) bridge> at device 1.0 on pci0=0A=
pci1: <PCI bus> on pcib1=0A=
pci1: <NVidia Riva Vanta TNT2 graphics accelerator> at 5.0 irq 10=0A=
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <VIA 82C686 ATA100 controller> port 0xd400-0xd40f at device 7.1 =
on pci0=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device =
7.2 on pci0=0A=
usb0: <VIA 83C572 USB controller> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2=0A=
uhub1: 4 ports with 4 removable, self powered=0A=
ums0: Logitech, Inc. iFeel Mouse, rev 1.00/1.01, addr 3, iclass 3/1=0A=
device_probe_and_attach: ums0 attach returned 6=0A=
ugen0: Logitech, Inc. iFeel Mouse, rev 1.00/1.01, addr 3=0A=
ugen0: setting configuration index 0 failed=0A=
device_probe_and_attach: ugen0 attach returned 6=0A=
uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 11 at device =
7.3 on pci0=0A=
usb1: <VIA 83C572 USB controller> on uhci1=0A=
usb1: USB revision 1.0=0A=
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub2: 2 ports with 2 removable, self powered=0A=
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0=0A=
chip2: <VIA 82C686 AC97 Audio> port =
0xe800-0xe803,0xe400-0xe403,0xe000-0xe0ff irq 12 at device 7.5 on pci0=0A=
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem =
0xdd000000-0xdd00007f irq 11 at device 9.0 on pci0=0A=
xl0: Ethernet address: 00:01:03:cd:6e:86=0A=
miibus0: <MII bus> on xl0=0A=
ukphy0: <Generic IEEE 802.3u media interface> on miibus0=0A=
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
orm0: <Option ROM> at iomem 0xcc000-0xcc7ff on isa0=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio1: type 16550A=0A=
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A=
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/8 bytes threshold=0A=
plip0: <PLIP network interface> on ppbus0=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
ad0: 58644MB <IBM-DTLA-307060> [119150/16/63] at ata0-master UDMA100=0A=
acd0: DVD-ROM <SAMSUNG DVD-ROM SD-612> at ata1-master using PIO4=0A=
afd0: 0MB <IOMEGA ZIP 250 ATAPI> [0/64/32] at ata1-slave using PIO3=0A=
Mounting root from ufs:/dev/ad0s3a=0A=
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck=0A=
--Boundary_(ID_7v9gtYPqa4G9uuSkAUvpfg)
Content-type: application/octet-stream; name=JACKICE
Content-transfer-encoding: quoted-printable
Content-disposition: attachment; filename=JACKICE
#=0A=
# GENERIC -- Generic kernel configuration file for FreeBSD/i386=0A=
#=0A=
# For more information on this file, please read the handbook section on=0A=
# Kernel Configuration Files:=0A=
#=0A=
# http://www.FreeBSD.org/handbook/kernelconfig-config.html=0A=
#=0A=
# The handbook is also available locally in /usr/share/doc/handbook=0A=
# if you've installed the doc distribution, otherwise always see the=0A=
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the=0A=
# latest information.=0A=
#=0A=
# An exhaustive list of options and more detailed explanations of the=0A=
# device lines is also present in the ./LINT configuration file. If you =
are=0A=
# in doubt as to the purpose or necessity of a line, check first in LINT.=0A=
#=0A=
# $FreeBSD: src/sys/i386/conf/JACKICE,v 1.246.2.38 2002/01/25 17:41:40 =
murray Exp $=0A=
=0A=
machine i386=0A=
cpu I686_CPU=0A=
ident JACKICE=0A=
maxusers 0=0A=
=0A=
#makeoptions DEBUG=3D-g #Build kernel with gdb(1) debug symbols=0A=
=0A=
#options MATH_EMULATE #Support for x87 emulation=0A=
options INET #InterNETworking=0A=
options INET6 #IPv6 communications protocols=0A=
options FFS #Berkeley Fast Filesystem=0A=
options FFS_ROOT #FFS usable as root device [keep this!]=0A=
options SOFTUPDATES #Enable FFS soft updates support=0A=
options UFS_DIRHASH #Improve performance on big directories=0A=
options MFS #Memory Filesystem=0A=
options MD_ROOT #MD is a potential root device=0A=
options NFS #Network Filesystem=0A=
options NFS_ROOT #NFS usable as root device, NFS required=0A=
options MSDOSFS #MSDOS Filesystem=0A=
options CD9660 #ISO 9660 Filesystem=0A=
options CD9660_ROOT #CD-ROM usable as root, CD9660 required=0A=
options PROCFS #Process filesystem=0A=
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]=0A=
options SCSI_DELAY=3D15000 #Delay (in ms) before probing SCSI=0A=
options UCONSOLE #Allow users to grab the console=0A=
options USERCONFIG #boot -c editor=0A=
options VISUAL_USERCONFIG #visual boot -c editor=0A=
options KTRACE #ktrace(1) support=0A=
options SYSVSHM #SYSV-style shared memory=0A=
options SYSVMSG #SYSV-style message queues=0A=
options SYSVSEM #SYSV-style semaphores=0A=
options P1003_1B #Posix P1003_1B real-time extensions=0A=
options _KPOSIX_PRIORITY_SCHEDULING=0A=
options ICMP_BANDLIM #Rate limit bad replies=0A=
options KBD_INSTALL_CDEV # install a CDEV entry in /dev=0A=
options NTFS #NT Filesystem=0A=
=0A=
# To make an SMP kernel, the next two are needed=0A=
#options SMP # Symmetric MultiProcessor Kernel=0A=
#options APIC_IO # Symmetric (APIC) I/O=0A=
=0A=
device isa=0A=
device eisa=0A=
device pci=0A=
=0A=
# Floppy drives=0A=
device fdc0 at isa? port IO_FD1 irq 6 drq 2=0A=
device fd0 at fdc0 drive 0=0A=
device fd1 at fdc0 drive 1=0A=
#=0A=
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,=0A=
# don't use the above line for fdc0 but the following one:=0A=
#device fdc0=0A=
=0A=
# ATA and ATAPI devices=0A=
device ata0 at isa? port IO_WD1 irq 14=0A=
device ata1 at isa? port IO_WD2 irq 15=0A=
device ata=0A=
device atadisk # ATA disk drives=0A=
device atapicd # ATAPI CDROM drives=0A=
device atapifd # ATAPI floppy drives=0A=
#device atapist # ATAPI tape drives=0A=
options ATA_STATIC_ID #Static device numbering=0A=
=0A=
# SCSI Controllers=0A=
#device ahb # EISA AHA1742 family=0A=
#device ahc # AHA2940 and onboard AIC7xxx devices=0A=
#device amd # AMD 53C974 (Tekram DC-390(T))=0A=
#device isp # Qlogic family=0A=
#device ncr # NCR/Symbios Logic=0A=
#device sym # NCR/Symbios Logic (newer chipsets)=0A=
#options SYM_SETUP_LP_PROBE_MAP=3D0x40=0A=
# Allow ncr to attach legacy NCR devices when =0A=
# both sym and ncr are configured=0A=
=0A=
#device adv0 at isa?=0A=
#device adw=0A=
#device bt0 at isa?=0A=
#device aha0 at isa?=0A=
#device aic0 at isa?=0A=
=0A=
#device ncv # NCR 53C500=0A=
#device nsp # Workbit Ninja SCSI-3=0A=
#device stg # TMC 18C30/18C50=0A=
=0A=
# SCSI peripherals=0A=
device scbus # SCSI bus (required)=0A=
#device da # Direct Access (disks)=0A=
#device sa # Sequential Access (tape etc)=0A=
#device cd # CD=0A=
#device pass # Passthrough device (direct SCSI access)=0A=
=0A=
# RAID controllers interfaced to the SCSI subsystem=0A=
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID=0A=
#device dpt # DPT Smartcache - See LINT for options!=0A=
#device mly # Mylex AcceleRAID/eXtremeRAID=0A=
=0A=
# RAID controllers=0A=
#device aac # Adaptec FSA RAID, Dell PERC2/PERC3=0A=
#device ida # Compaq Smart RAID=0A=
#device amr # AMI MegaRAID=0A=
#device mlx # Mylex DAC960 family=0A=
#device twe # 3ware Escalade=0A=
=0A=
# atkbdc0 controls both the keyboard and the PS/2 mouse=0A=
device atkbdc0 at isa? port IO_KBD=0A=
device atkbd0 at atkbdc? irq 1 flags 0x1=0A=
device psm0 at atkbdc? irq 12=0A=
=0A=
device vga0 at isa?=0A=
=0A=
# splash screen/screen saver=0A=
pseudo-device splash=0A=
=0A=
# syscons is the default console driver, resembling an SCO console=0A=
device sc0 at isa? flags 0x100=0A=
=0A=
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver=0A=
#device vt0 at isa?=0A=
#options XSERVER # support for X server on a vt console=0A=
#options FAT_CURSOR # start with block cursor=0A=
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT =
lines=0A=
#options PCVT_SCANSET=3D2 # IBM keyboards are non-std=0A=
=0A=
# Floating point support - do not disable.=0A=
device npx0 at nexus? port IO_NPX irq 13=0A=
=0A=
# Power management support (see LINT for more options)=0A=
device apm0 at nexus? disable flags 0x20 # Advanced Power Management=0A=
=0A=
# PCCARD (PCMCIA) support=0A=
device card=0A=
device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000=0A=
device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable=0A=
=0A=
# Serial (COM) ports=0A=
device sio0 at isa? port IO_COM1 flags 0x10 irq 4=0A=
device sio1 at isa? port IO_COM2 irq 3=0A=
device sio2 at isa? disable port IO_COM3 irq 5=0A=
device sio3 at isa? disable port IO_COM4 irq 9=0A=
=0A=
# Parallel port=0A=
device ppc0 at isa? irq 7=0A=
device ppbus # Parallel port bus (required)=0A=
device lpt # Printer=0A=
device plip # TCP/IP over parallel=0A=
device ppi # Parallel port interface device=0A=
#device vpo # Requires scbus and da=0A=
=0A=
=0A=
# PCI Ethernet NICs.=0A=
#device de # DEC/Intel DC21x4x (``Tulip'')=0A=
#device txp # 3Com 3cR990 (``Typhoon'')=0A=
#device vx # 3Com 3c590, 3c595 (``Vortex'')=0A=
=0A=
# PCI Ethernet NICs that use the common MII bus controller code.=0A=
# NOTE: Be sure to keep the 'device miibus' line in order to use these =
NICs!=0A=
device miibus # MII bus support=0A=
#device dc # DEC/Intel 21143 and various workalikes=0A=
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)=0A=
#device pcn # AMD Am79C97x PCI 10/100 NICs=0A=
#device rl # RealTek 8129/8139=0A=
#device sf # Adaptec AIC-6915 (``Starfire'')=0A=
#device sis # Silicon Integrated Systems SiS 900/SiS 7016=0A=
#device ste # Sundance ST201 (D-Link DFE-550TX)=0A=
#device tl # Texas Instruments ThunderLAN=0A=
#device tx # SMC EtherPower II (83c170 ``EPIC'')=0A=
#device vr # VIA Rhine, Rhine II=0A=
#device wb # Winbond W89C840F=0A=
#device wx # Intel Gigabit Ethernet Card (``Wiseman'')=0A=
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')=0A=
#device bge # Broadcom BCM570x (``Tigon III'')=0A=
=0A=
# ISA Ethernet NICs.=0A=
# 'device ed' requires 'device miibus'=0A=
#device ed0 at isa? port 0x280 irq 10 iomem 0xd8000=0A=
#device ex=0A=
#device ep=0A=
#device fe0 at isa? port 0x300=0A=
# Xircom Ethernet=0A=
#device xe=0A=
# PRISM I IEEE 802.11b wireless NIC.=0A=
#device awi=0A=
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really=0A=
# exists only as a PCMCIA device, so there is no ISA attachment needed=0A=
# and resources will always be dynamically assigned by the pccard code.=0A=
#device wi=0A=
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below =
will=0A=
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP=0A=
# mode (the factory default). If you set the switches on your ISA=0A=
# card for a manually chosen I/O address and IRQ, you must specify=0A=
# those parameters here.=0A=
#device an=0A=
# The probe order of these is presently determined by =
i386/isa/isa_compat.c.=0A=
#device ie0 at isa? port 0x300 irq 10 iomem 0xd0000=0A=
#device le0 at isa? port 0x300 irq 5 iomem 0xd0000=0A=
#device lnc0 at isa? port 0x280 irq 10 drq 0=0A=
#device cs0 at isa? port 0x300=0A=
#device sn0 at isa? port 0x300 irq 10=0A=
=0A=
# Pseudo devices - the number indicates how many units to allocate.=0A=
pseudo-device loop # Network loopback=0A=
pseudo-device ether # Ethernet support=0A=
pseudo-device sl 1 # Kernel SLIP=0A=
pseudo-device ppp 1 # Kernel PPP=0A=
pseudo-device tun # Packet tunnel.=0A=
pseudo-device pty # Pseudo-ttys (telnet etc)=0A=
pseudo-device md # Memory "disks"=0A=
pseudo-device gif # IPv6 and IPv4 tunneling=0A=
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)=0A=
=0A=
# The `bpf' pseudo-device enables the Berkeley Packet Filter.=0A=
# Be aware of the administrative consequences of enabling this!=0A=
pseudo-device bpf #Berkeley packet filter=0A=
=0A=
# USB support=0A=
device uhci # UHCI PCI->USB interface=0A=
#device ohci # OHCI PCI->USB interface=0A=
device usb # USB Bus (required)=0A=
device ugen # Generic=0A=
device uhid # "Human Interface Devices"=0A=
#device ukbd # Keyboard=0A=
#device ulpt # Printer=0A=
device umass # Disks/Mass storage - Requires scbus and da=0A=
device ums # Mouse=0A=
#device uscanner # Scanners=0A=
#device urio # Diamond Rio MP3 Player=0A=
# USB Ethernet, requires mii=0A=
#device aue # ADMtek USB ethernet=0A=
#device cue # CATC USB ethernet=0A=
#device kue # Kawasaki LSI USB ethernet=0A=
--Boundary_(ID_7v9gtYPqa4G9uuSkAUvpfg)--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000801c1e288$9f491100$0700a8c0>