Date: Fri, 20 Jul 2001 08:51:19 -0700 (PDT) From: Amatus <c11h15no2@yahoo.com> To: freebsd-hardware@freebsd.org Subject: exotic PCMCIA Message-ID: <20010720155119.67317.qmail@web10905.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] I just baught a Sony Viao PCG-FX210 laptop and installed FreeBSD 4.3 RELEASE. My problem is that whenever I insert a PCMCIA card, my system completely freezes. If I boot with a card inserted it will stop after some messages about the parallel port, in this case if I press Ctrl+Alt+Del it will halt the system. This happens with any card in any slot. Attached are the verbose messages generated by the GENERIC kernel. ===== ************************************************************ This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient or the person responsible for delivering to the intended recipient, be advised that you have received this email in error and that any use of the information contained within this email or attachments is strictly prohibited. ************************************************************ __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ [-- Attachment #2 --] Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001 jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC Calibrating clock(s) ... TSC clock: 800019270 Hz, i8254 clock: 1193169 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: AMD Duron(tm) Processor (800.03-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x631 Stepping = 1 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> Data TLB: 24 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 134152192 (131008K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00473000 - 0x07fe7fff, 129454080 bytes (31605 pages) avail memory = 126226432 (123268K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f7d00 bios32: Entry = 0xfd710 (c00fd710) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x12d pnpbios: Found PnP BIOS data at 0xc00f7d30 pnpbios: Entry = f0000:b258 Rev = 1.0 Other BIOS signatures found: ACPI: 000f7ce0 Preloaded elf kernel "kernel.GENERIC" at 0xc044d000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x80003904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106) npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106) pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x1106, dev=0x0305, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base f8000000, size 26 found-> vendor=0x1106, dev=0xb115, revid=0x00 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x1106, dev=0x0686, revid=0x22 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1106, dev=0x0571, revid=0x10 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 00001c40, size 4 found-> vendor=0x1106, dev=0x3038, revid=0x10 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=9 map[20]: type 1, range 32, base 00001c00, size 5 found-> vendor=0x1106, dev=0x3038, revid=0x10 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=9 map[20]: type 1, range 32, base 00001c20, size 5 found-> vendor=0x1106, dev=0x3057, revid=0x30 class=06-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1106, dev=0x3058, revid=0x20 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=c, irq=5 map[10]: type 1, range 32, base 00001000, size 8 map[14]: type 1, range 32, base 00001c54, size 2 map[18]: type 1, range 32, base 00001c50, size 2 found-> vendor=0x1106, dev=0x3068, revid=0x20 class=07-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=c, irq=5 map[10]: type 1, range 32, base 00001400, size 8 found-> vendor=0x104c, dev=0xac51, revid=0x00 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=9 found-> vendor=0x104c, dev=0xac51, revid=0x00 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=10 found-> vendor=0x104c, dev=0x8020, revid=0x00 class=0c-00-10, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base f4004000, size 11 map[14]: type 1, range 32, base f4000000, size 14 found-> vendor=0x10ec, dev=0x8139, revid=0x10 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 00001800, size 8 map[14]: type 1, range 32, base f4004800, size 8 pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=1106 device=b115)> at device 1.0 on pci0 found-> vendor=0x1002, dev=0x4c4d, revid=0x64 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base f5000000, size 24 map[14]: type 1, range 32, base 00009000, size 8 map[18]: type 1, range 32, base f4100000, size 12 pci1: <PCI bus> on pcib1 pci1: <ATI Mobility-1 graphics accelerator> (vendor=0x1002, dev=0x4c4d) at 0.0 irq 5 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA66 controller> port 0x1c40-0x1c4f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1c40 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1c48 ata1: mask=03 status0=50 status1=00 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI probe a=14 b=eb ata1-slave: ATAPI probe a=14 b=eb ata1: mask=03 status0=00 status1=00 ata1: devices=0c ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0x1c00-0x1c1f irq 9 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0x1c20-0x1c3f irq 9 at device 7.3 on pci0 using shared irq9. usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered isab1: <PCI to ISA bridge (vendor=1106 device=3057)> at device 7.4 on pci0 chip1: <VIA 82C686 AC97 Audio> port 0x1c50-0x1c53,0x1c54-0x1c57,0x1000-0x10ff irq 5 at device 7.5 on pci0 chip2: <VIA 82C686 AC97 Modem> port 0x1400-0x14ff irq 5 at device 7.6 on pci0 pcic-pci0: <TI PCI-1420 PCI-CardBus Bridge> irq 9 at device 10.0 on pci0 pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pcic-pci0: Legacy address set to 0x3e0 PCI Config space: 00: ac51104c 02100007 06070000 00820008 10: 00000000 020000a0 00000000 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c00109 40: 80e3104d 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 08449061 00000000 00000000 012c1222 90: 6166a2c0 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ff53: f000ff53: f000e2c3: f000ff53: 10: f000ff53: f000ff54: f000a430: f000ff53: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 pcic-pci1: <TI PCI-1420 PCI-CardBus Bridge> irq 10 at device 10.1 on pci0 pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] PCI Config space: 00: ac51104c 02100007 06070000 00820008 10: 00000000 020000a0 00000000 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c0020a 40: 80e3104d 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 08449061 00000000 00000000 012c1222 90: 6166a2c0 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ff53: f000ff53: f000e2c3: f000ff53: 10: f000ff53: f000ff54: f000a430: f000ff53: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 pci0: <unknown card> (vendor=0x104c, dev=0x8020) at 14.0 irq 9 rl0: <RealTek 8139 10/100BaseTX> port 0x1800-0x18ff mem 0xf4004800-0xf40048ff irq 10 at device 16.0 on pci0 rl0: Ethernet address: 08:00:46:1d:3d:81 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: rl0 attached ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 adv0 failed to probe at port 0x330 on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 b4 1f 00 4f 0d 0e 00 00 06 90 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 b4 1f 00 4f 0d 0e 00 00 06 90 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode stat is 0 stat is 0 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 pcic1: not probed (disabled) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: faith0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c240, tty 631092, net 671492 bpf: sl0 attached ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ata0-master: success setting UDMA4 on VIA chip Creating DISK ad0 Creating DISK wd0 ad0: <FUJITSU MHM2100AT/5823> ATA-5 disk at ata0-master ad0: 9590MB (19640880 sectors), 19485 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA66 ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 ad0: 9590MB <FUJITSU MHM2100AT> [19485/16/63] at ata0-master UDMA66 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <HITACHI DVD-ROM GD-S200/0020> DVD-ROM drive at ata1 as master acd0: read 1722KB/s (4134KB/s), 512KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 19631429, size 19631367 : OK start_init: trying /sbin/init Linux-ELF exec handler installed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010720155119.67317.qmail>