Date: Sun, 3 Jul 2016 15:17:26 +0200 From: Kurt Jaeger <pi@FreeBSD.org> To: Andriy Voskoboinyk <s3erios@gmail.com> Cc: Kurt Jaeger <pi@freebsd.org>, "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: kismet, which cards are supported ? Message-ID: <20160703131726.GV2369@fc.opsec.eu> In-Reply-To: <op.yj0uvpmiiew4ia@localhost> References: <20160703105453.GT2369@fc.opsec.eu> <op.yj0uvpmiiew4ia@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi!
> Automatic mode switching is not supported since r178354; you should
> manually create an interface with required mode:
>
> ifconfig wlan0 create wlandev <dev> wlanmode monitor up
Thanks. On a laptop with
FreeBSD 10.3-RELEASE-p4 amd64
and this wlan hardware:
iwn0@pci0:2:0:0: class=0x028000 card=0x13118086 chip=0x42398086 rev=0x35
hdr=0x00
vendor = 'Intel Corporation'
device = 'Centrino Advanced-N 6200'
class = network
bar [10] = type Memory, range 64, base 0xf2400000, size 8192, enabled
If I do this:
ifconfig wlan0 wlanmode monitor
this is the error message:
ifconfig: wlanmode: bad value
So I tested it on another laptop:
With this card:
wpi0@pci0:3:0:0: class=0x028000 card=0x10118086 chip=0x42278086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/Wireless 3945ABG [Golan] Network Connection'
class = network
bar [10] = type Memory, range 32, base 0xdfcff000, size 4096, enabled
ifconfig wlan0 create wlandev wpi0 wlanmode monitor up
worked, but:
Jul 3 15:18:40 xdog kernel: wlan0: permanently promiscuous mode enabled
Jul 3 15:18:41 xdog kernel: wpi0: could not set power mode
Jul 3 15:18:41 xdog kernel: wpi0: error 35 settting channel
Jul 3 15:18:42 xdog kernel: wpi0: wpi_cmd: cmd 119 not sent, busy
Jul 3 15:18:42 xdog kernel: wpi0: could not set power mode
Jul 3 15:18:42 xdog kernel: wpi0: error 35 settting channel
Jul 3 15:18:43 xdog kernel: wpi0: wpi_cmd: cmd 119 not sent, busy
Jul 3 15:18:43 xdog kernel: wpi0: could not set power mode
Jul 3 15:18:43 xdog kernel: wpi0: error 35 settting channel
Jul 3 15:18:44 xdog kernel: wpi0: wpi_cmd: cmd 119 not sent, busy
[...]
--
pi@FreeBSD.org +49 171 3101372 4 years to go !
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20160703131726.GV2369>