Date: Sun, 19 Sep 2004 03:56:31 -0400 (EDT) From: "kalin mintchev" <kalin@el.net> To: freebsd-mobile@freebsd.org Subject: Re: ath problems again Message-ID: <49555.141.155.56.241.1095580591.squirrel@el.net> In-Reply-To: <49382.141.155.56.241.1095524674.squirrel@el.net> References: <49178.141.155.56.241.1095491077.squirrel@el.net> <49382.141.155.56.241.1095524674.squirrel@el.net>
next in thread | previous in thread | raw e-mail | index | archive | help
i tried again. this time the output was longer: ===> ath cc -O -pipe -mcpu=pentiumpro -I. -I/usr/src/sys/modules/ath/../../contrib/dev/ath/freebsd -I/usr/src/s ys/modules/ath/../../contrib/dev/ath -D_KERNEL -Wall -Wredundant-decls -Wnested-externs -Wstrict-prot otypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -std=c99 -DKLD_ MODULE -nostdinc -I- -I. -I/usr/src/sys/modules/ath/../../contrib/dev/ath/freebsd -I/usr/src/sys/modu les/ath/../../contrib/dev/ath -I. -I@ -I@/../include -finline-limit=15000 -fno-common -mno-align-long -strings -mpreferred-stack-boundary=2 -ffreestanding -Wall -Wredundant-decls -Wnested-externs -Wstrict -prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -std=c99 - c /usr/src/sys/dev/ath/if_ath.c /usr/src/sys/dev/ath/if_ath.c: In function `ath_beacon_config': /usr/src/sys/dev/ath/if_ath.c:1518: error: too many arguments to function /usr/src/sys/dev/ath/if_ath.c: In function `ath_node_alloc': /usr/src/sys/dev/ath/if_ath.c:1672: error: `M_80211_NODE' undeclared (first use in this function) /usr/src/sys/dev/ath/if_ath.c:1672: error: (Each undeclared identifier is reported only once /usr/src/sys/dev/ath/if_ath.c:1672: error: for each function it appears in.) /usr/src/sys/dev/ath/if_ath.c: In function `ath_rx_proc': /usr/src/sys/dev/ath/if_ath.c:1941: warning: implicit declaration of function `bpf_mtap2' /usr/src/sys/dev/ath/if_ath.c:2023: error: too few arguments to function /usr/src/sys/dev/ath/if_ath.c: In function `ath_newstate': /usr/src/sys/dev/ath/if_ath.c:2821: error: too many arguments to function /usr/src/sys/dev/ath/if_ath.c:2823: error: too many arguments to function *** Error code 1 Stop in /usr/src/sys/modules/ath. *** Error code 1 Stop in /usr/src/sys/modules. *** Error code 1 Stop in /usr/src/sys/i386/compile/KERNME521_3. > i tried to compile the net80211+ath-20040818 driver. got this: > > ../../../dev/ath/if_ath.c: In function `ath_beacon_config': > ../../../dev/ath/if_ath.c:1516: error: too many arguments to function > ../../../dev/ath/if_ath.c: In function `ath_rx_proc': > ../../../dev/ath/if_ath.c:2030: error: too few arguments to function > ../../../dev/ath/if_ath.c: In function `ath_newstate': > ../../../dev/ath/if_ath.c:2838: error: too many arguments to function > ../../../dev/ath/if_ath.c:2840: error: too many arguments to function > *** Error code 1 > > now what? > > thanks.. > > > >> hi everybody... >> >> i had to use the ath card again. >> after associating it starts dropping packets like crazy. i haven't >> changed >> anything since i used it last 3 weeks ago with the same router... >> it cuts off every 7 - 10 packets. browser is just stalled... part of the >> ping is below. >> is there a new version somewhere? can anybody help? >> >> thanks >> >> PING 192.168.1.1 (192.168.1.1): 56 data bytes >> 64 bytes from 192.168.1.1: icmp_seq=0 ttl=150 time=4.406 ms >> 64 bytes from 192.168.1.1: icmp_seq=1 ttl=150 time=2.338 ms >> 64 bytes from 192.168.1.1: icmp_seq=2 ttl=150 time=2.008 ms >> 64 bytes from 192.168.1.1: icmp_seq=3 ttl=150 time=2.122 ms >> 64 bytes from 192.168.1.1: icmp_seq=4 ttl=150 time=2.055 ms >> 64 bytes from 192.168.1.1: icmp_seq=5 ttl=150 time=2.005 ms >> 64 bytes from 192.168.1.1: icmp_seq=6 ttl=150 time=1.984 ms >> 64 bytes from 192.168.1.1: icmp_seq=7 ttl=150 time=2.017 ms >> 64 bytes from 192.168.1.1: icmp_seq=8 ttl=150 time=2.101 ms >> 64 bytes from 192.168.1.1: icmp_seq=14 ttl=150 time=306.406 ms >> 64 bytes from 192.168.1.1: icmp_seq=15 ttl=150 time=2.465 ms >> 64 bytes from 192.168.1.1: icmp_seq=16 ttl=150 time=2.433 ms >> 64 bytes from 192.168.1.1: icmp_seq=17 ttl=150 time=2.443 ms >> 64 bytes from 192.168.1.1: icmp_seq=18 ttl=150 time=2.508 ms >> 64 bytes from 192.168.1.1: icmp_seq=19 ttl=150 time=2.466 ms >> 64 bytes from 192.168.1.1: icmp_seq=20 ttl=150 time=2.810 ms >> 64 bytes from 192.168.1.1: icmp_seq=21 ttl=150 time=4.344 ms >> 64 bytes from 192.168.1.1: icmp_seq=22 ttl=150 time=2.540 ms >> 64 bytes from 192.168.1.1: icmp_seq=23 ttl=150 time=2.596 ms >> 64 bytes from 192.168.1.1: icmp_seq=29 ttl=150 time=175.933 ms >> 64 bytes from 192.168.1.1: icmp_seq=30 ttl=150 time=1.980 ms >> 64 bytes from 192.168.1.1: icmp_seq=31 ttl=150 time=2.502 ms >> 64 bytes from 192.168.1.1: icmp_seq=32 ttl=150 time=2.035 ms >> 64 bytes from 192.168.1.1: icmp_seq=33 ttl=150 time=2.046 ms >> 64 bytes from 192.168.1.1: icmp_seq=34 ttl=150 time=2.539 ms >> 64 bytes from 192.168.1.1: icmp_seq=35 ttl=150 time=2.406 ms >> 64 bytes from 192.168.1.1: icmp_seq=41 ttl=150 time=35.484 ms >> 64 bytes from 192.168.1.1: icmp_seq=42 ttl=150 time=4.065 ms >> 64 bytes from 192.168.1.1: icmp_seq=43 ttl=150 time=3.708 ms >> 64 bytes from 192.168.1.1: icmp_seq=44 ttl=150 time=2.528 ms >> 64 bytes from 192.168.1.1: icmp_seq=45 ttl=150 time=2.615 ms >> 64 bytes from 192.168.1.1: icmp_seq=46 ttl=150 time=2.581 ms >> 64 bytes from 192.168.1.1: icmp_seq=47 ttl=150 time=2.622 ms >> 64 bytes from 192.168.1.1: icmp_seq=48 ttl=150 time=2.506 ms >> 64 bytes from 192.168.1.1: icmp_seq=49 ttl=150 time=2.789 ms >> 64 bytes from 192.168.1.1: icmp_seq=50 ttl=150 time=2.006 ms >> 64 bytes from 192.168.1.1: icmp_seq=51 ttl=150 time=7.904 ms >> 64 bytes from 192.168.1.1: icmp_seq=56 ttl=150 time=876.891 ms >> 64 bytes from 192.168.1.1: icmp_seq=57 ttl=150 time=4.109 ms >> 64 bytes from 192.168.1.1: icmp_seq=58 ttl=150 time=2.652 ms >> 64 bytes from 192.168.1.1: icmp_seq=59 ttl=150 time=2.595 ms >> 64 bytes from 192.168.1.1: icmp_seq=60 ttl=150 time=2.037 ms >> 64 bytes from 192.168.1.1: icmp_seq=61 ttl=150 time=2.007 ms >> 64 bytes from 192.168.1.1: icmp_seq=62 ttl=150 time=2.038 ms >> 64 bytes from 192.168.1.1: icmp_seq=63 ttl=150 time=2.598 ms >> 64 bytes from 192.168.1.1: icmp_seq=64 ttl=150 time=2.040 ms >> 64 bytes from 192.168.1.1: icmp_seq=65 ttl=150 time=2.601 ms >> 64 bytes from 192.168.1.1: icmp_seq=66 ttl=150 time=2.757 ms >> 64 bytes from 192.168.1.1: icmp_seq=71 ttl=150 time=795.986 ms >> 64 bytes from 192.168.1.1: icmp_seq=72 ttl=150 time=7.793 ms >> 64 bytes from 192.168.1.1: icmp_seq=73 ttl=150 time=2.465 ms >> 64 bytes from 192.168.1.1: icmp_seq=74 ttl=150 time=2.033 ms >> 64 bytes from 192.168.1.1: icmp_seq=75 ttl=150 time=2.087 ms >> 64 bytes from 192.168.1.1: icmp_seq=76 ttl=150 time=2.529 ms >> 64 bytes from 192.168.1.1: icmp_seq=77 ttl=150 time=2.039 ms >> 64 bytes from 192.168.1.1: icmp_seq=78 ttl=150 time=2.066 ms >> 64 bytes from 192.168.1.1: icmp_seq=84 ttl=150 time=596.179 ms >> 64 bytes from 192.168.1.1: icmp_seq=85 ttl=150 time=2.619 ms >> 64 bytes from 192.168.1.1: icmp_seq=86 ttl=150 time=2.031 ms >> >> >> -- >> >> _______________________________________________ >> freebsd-mobile@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile >> To unsubscribe, send any mail to >> "freebsd-mobile-unsubscribe@freebsd.org" >> > > > -- > > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" > --
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49555.141.155.56.241.1095580591.squirrel>