Date: Wed, 19 Jun 2002 07:10:53 -0700 From: Kent Stewart <kstewart@owt.com> To: John Prince <johnp@lodgenet.com> Cc: bmah@FreeBSD.ORG, Doug Barton <DougB@FreeBSD.ORG>, stable@FreeBSD.ORG Subject: Re: RFC: Errata on CDROM installs (was Re: ATA Atapi 4.6 Release) Message-ID: <3D1090ED.2070604@owt.com> References: <20020617213853.Y4899-100000@master.gorean.org> <20020617213853.Y4899-100000@master.gorean.org> <5.1.0.14.2.20020619083035.024232f8@popmail.ct.lodgenet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
John Prince wrote: > Hello Bruce.. > While this worked on a 40x > I tried 4 different 52x cdroms and 2 50x cdroms that did not > work. Both speeds were AOpen drives. > Error during Install: > ACD0: READ_BIG - HARDWARE ERROR asc=0x08 asq=0x03 error=0x00 > The cdrom works fine with same drive(s) on 4.5_release. > I will try a couple other drives that did not work (mitsumi and toshiba) > > These results are with setting the DMA per the errata doc. > I am rebuilding from src right now, (RELENG_4) and will see what happens.. > Or should I build from RELENG_4_6 ? Søren's ata patches were only added to RELENG_4. Kent > > Thanks. > --john > > > At 04:44 PM 6/18/2002 -0700, Bruce A. Mah wrote: > >> If memory serves me right, Doug Barton wrote: >> > This all looks good to me. John, can you confirm that the procedure >> below >> > works? >> >> I've written up a slightly more polished errata note; a PDF rendering is >> at the URL below. Could someone tell me if this actually works or not? >> (I'm especially interested in feedback on the CD-ROM install procedure.) >> >> I have never seen the problem first-hand, so some of you folks who've >> actually experienced it need to say if I've got it right or not. >> >> http://people.freebsd.org/~bmah/doc/errata/article.pdf >> >> If this works, I will commit it and get it onto the Web site so users >> experiencing this problem can get a workaround in one easy-to-find >> place. >> >> Thanks, >> >> Bruce. >> >> >> > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > > . > -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D1090ED.2070604>