Date: Mon, 13 Oct 2025 21:10:47 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: ivy@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-stable-15-amd64-test - Build #64 - Still Failing Message-ID: <572735064.1211.1760389847473@jenkins.ci.freebsd.org> In-Reply-To: <1840013706.1185.1760353356287@jenkins.ci.freebsd.org> References: <1840013706.1185.1760353356287@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-stable-15-amd64-test - Build #64 (3b5ec539beefb82dd3210f51c0e2e0759b20dad8) - Still Failing Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/64/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/64/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/64/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) 3b5ec539beefb82dd3210f51c0e2e0759b20dad8 by ivy: Makefile.inc1: Build source packages before sets The end of the build log: [...truncated 4.39 MiB...] epair0b: Ethernet address: 72:ad:dd:45:88:f2 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 2a:7a:03:fd:d3:bd epair1b: Ethernet address: d6:ec:79:c7:47:49 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.176s] sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 7e:b2:c5:c6:12:1d epair0b: Ethernet address: fe:4d:59:44:33:9f epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 72:ff:62:88:e2:cb epair1b: Ethernet address: b2:b4:2a:b4:62:e5 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.146s] sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: ee:de:94:bd:e7:e4 epair0b: Ethernet address: 26:c6:5e:77:e5:bb epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 9e:98:a6:8c:0e:f4 epair1b: Ethernet address: 52:48:0d:84:a1:0a epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.146s] sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 1e:e8:24:48:ab:bd epair0b: Ethernet address: ae:60:42:1c:1c:91 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: a6:f6:4e:44:82:b4 epair1b: Ethernet address: 66:46:d9:c1:43:7e epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.157s] sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: be:af:82:38:8d:2b epair0b: Ethernet address: 72:b4:a0:69:fa:ab epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: ae:10:72:18:64:f5 epair1b: Ethernet address: 86:51:e0:c7:f3:b1 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.178s] sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 0e:ce:af:75:bc:01 epair0b: Ethernet address: b6:c6:68:dc:07:9c epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 1a:75:bf:a0:f9:b0 epair1b: Ethernet address: 52:ba:89:1e:97:bc epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.145s] sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: ba:b1:bb:25:63:7c epair0b: Ethernet address: 42:13:b1:a0:1e:b4 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 96:77:1f:d9:62:44 epair1b: Ethernet address: 3e:b5:eb:49:fe:29 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.146s] sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: f2:7c:32:5d:12:f8 epair0b: Ethernet address: be:6b:8e:83:77:89 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: ca:b0:ba:b0:e6:c2 epair1b: Ethernet address: 52:e6:f6:45:9b:85 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.145s] sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 6e:71:96:fb:cf:e9 epair0b: Ethernet address: 7a:08:91:4d:48:42 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:8e:79:82:53:2b epair1b: Ethernet address: ae:94:ae:e5:7c:68 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 36:36:53:dd:13:6d epair2b: Ethernet address: 8e:6b:5b:71:9c:83 epair2a: link state changed to UP epair2b: link state changed to UP epair2b: link state changed to DOWN epair2a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.207s] sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 72:f7:53:d8:86:a5 epair0b: Ethernet address: 3a:8f:14:60:b6:fd epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 62:e7:c2:51:fc:26 epair1b: Ethernet address: 2a:92:73:46:a2:76 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: ca:24:55:02:ce:8f epair2b: Ethernet address: 4e:48:3a:0b:ad:80 epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled lo0: promiscuous mode disabled epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair2a: link state changed to DOWN epair2b: link state changed to DOWN failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [4.691s] sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 7e:5e:7f:13:de:2b epair0b: Ethernet address: 32:e6:42:78:35:6d epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: be:93:97:41:9c:4d epair1b: Ethernet address: 82:81:ae:f1:d0:0f epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 4e:cf:5d:49:bc:8c epair2b: Ethernet address: d6:ca:a1:37:e8:23 epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x18 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80c0f0e2 stack pointer = 0x28:0xfffffe008aef2980 frame pointer = 0x28:0xfffffe008aef29c0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 12 (swi1: netisr 0) rdi: fffffe008aef29d8 rsi: fffff801a0395796 rdx: 00000000ffffffff rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003 rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0 r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000 r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5 trap number = 12 panic: page fault cpuid = 1 time = 1760389831 KDB: stack backtrace: #0 0xffffffff80bc02ed at kdb_backtrace+0x5d #1 0xffffffff80b736d6 at vpanic+0x136 #2 0xffffffff80b73593 at panic+0x43 #3 0xffffffff8107bf69 at trap_pfault+0x3c9 #4 0xffffffff81051d78 at calltrap+0x8 #5 0xffffffff80d84aa9 at in6_cksum_partial_l2+0x109 #6 0xffffffff8295cab5 at fr_cksum+0xa5 #7 0xffffffff829621dd at ipf_checkl4sum+0xbd #8 0xffffffff829586f6 at ipf_checkv6sum+0x56 #9 0xffffffff8295a601 at ipf_makefrip+0x1691 #10 0xffffffff8295b6de at ipf_check+0x15e #11 0xffffffff82958c28 at ipf_check_wrapper6+0x58 #12 0xffffffff80cc33e8 at pfil_mbuf_in+0x38 #13 0xffffffff80d92b24 at ip6_input+0x484 #14 0xffffffff80cc0c48 at swi_net+0x128 #15 0xffffffff80b2d309 at ithread_loop+0x239 #16 0xffffffff80b2989b at fork_exit+0x7b #17 0xffffffff81052d9e at fork_trampoline+0xe Uptime: 1h44m25s Automatic reboot in 15 seconds - press a key on the console to abort + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-64' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./disable-dtrace-tests.sh x ./disable-zfs-tests.sh x ./auto-shutdown x ./run.sh x ./disable-notyet-tests.sh x ./run-kyua.sh + rm -f 'test-report.*' + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins7853234959048921720.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '3b5ec539beefb82dd3210f51c0e2e0759b20dad8', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: stable-15/latest_tested/amd64/amd64 -> ../../3b5ec539beefb82dd3210f51c0e2e0759b20dad8/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?572735064.1211.1760389847473>