Date: Wed, 16 Sep 2009 15:02:03 -0700 From: Pyun YongHyeon <pyunyh@gmail.com> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: CFT: axe(4) station address patch Message-ID: <20090916220203.GJ1155@michelle.cdnetworks.com> In-Reply-To: <200909162355.05395.hselasky@c2i.net> References: <20090916185256.GI1155@michelle.cdnetworks.com> <200909162355.05395.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--1SQmhf2mF2YjsYvc Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Wed, Sep 16, 2009 at 11:55:04PM +0200, Hans Petter Selasky wrote: > Hi, > > Can you send me the patch. > Sure. > Seems like the list software stripped it off. > > --HPS > > On Wednesday 16 September 2009 20:52:56 Pyun YongHyeon wrote: > > Hi, > > > > Traditionally axe(4) didn't support reprogramming station address > > (node id) as datasheet does not mention the required command. > > However AX88178 datasheet has the command and it seems the command > > works as expected. I've attached patch which will enable changing > > ethernet address of the controller for AX88178/AX88772/AX88172. > > I couldn't test it on AX88772 and AX88172 controller. So if you > > have these controllers would you give it try let me know how it > > goes on your controller? > > > > <testing> > > Check the ethernet address and change it to other address with > > ifconfig(8). The following command will change the ethernet address > > to aa:bb:cc:dd:ee:ff. > > #ifconfig ue0 down > > #ifconfig ue0 ether aa:bb:cc:dd:ee:ff > > #ifconfig ue0 up > > After that check whether you can still use network. > > > > Hans, would you review the patch? > --1SQmhf2mF2YjsYvc--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090916220203.GJ1155>