Date: Fri, 15 Jun 2012 00:28:59 -0400 From: Charles Owens <cowens@greatbaysoftware.com> To: stable@freebsd.org Subject: mfi(4) IO performance regression, post 8.1 Message-ID: <4FDABA0B.5030702@greatbaysoftware.com>
next in thread | raw e-mail | index | archive | help
Hello FreeBSD folk,
We're seeing what appears to be a storage performance regression as we
try to move from 8.1 (i386) to 8.3. We looked at 8.2 also and it
appears that the regression happened between 8.1 and 8.2.
Our system is an Intel S5520UR Server with 12 GB RAM, dual 4-core CPUs.
Storage is a LSI MegaSAS 1078 controller (mfi) in a RAID-10
configuration, using UFS + geom_journal for filesystem.
Postgresql performance, as seen via pgbench, dropped by approx 20%.
This testing was done with our usual PAE-enabled kernels. We then went
back to GENERIC kernels and did comparisons using "bonnie", results
below. Following that is a kernel boot log.
Notably, we're seeing this regression only with our RAID mfi(4) based
systems. Notably, from looking at FreeBSD source changelogs it appears
that the mfi(4) code has seen some changes since 8.1.
How can I investigate further? Assistance with sorting this out would
be greatly appreciated.
Thanks much,
Charles
Bonnie comparison
8.3 GENERIC
-------Sequential Output-------- ---Sequential Input-- --Random--
-Per Char- --Block--- -Rewrite-- -Per Char- --Block--- --Seeks---
Machine MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU /sec %CPU
100 93580 98.3 82136 26.6 113709 78.8 152081 98.8 3223876 100.0 233590.3 240.4
8.2 GENERIC
-------Sequential Output-------- ---Sequential Input-- --Random--
-Per Char- --Block--- -Rewrite-- -Per Char- --Block--- --Seeks---
Machine MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU /sec %CPU
100 95923 99.1 84042 56.7 110568 69.8 152088 100.6 4290802 82.8 239779.4 234.5
8.1 GENERIC
-------Sequential Output-------- ---Sequential Input-- --Random--
-Per Char- --Block--- -Rewrite-- -Per Char- --Block--- --Seeks---
Machine MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU /sec %CPU
100 140708 100.0 164261 44.4 208553 48.5 153472 100.0 3298756 100.0 270325.1 238.4
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p8 #1: Fri Jan 6 12:13:34 EST 2012
cowens@newcastle.greatbaysoftware.com:/usr/obj/usr/relbuild/os/RELENG_8_1/sys/GENERIC i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5530 @ 2.40GHz (2394.28-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106a5 Family = 6 Model = 1a Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 12884901888 (12288 MB)
avail memory = 2289147904 (2183 MB)
ACPI APIC Table:<INTEL S5520UR>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
cpu8 (AP): APIC ID: 16
cpu9 (AP): APIC ID: 17
cpu10 (AP): APIC ID: 18
cpu11 (AP): APIC ID: 19
cpu12 (AP): APIC ID: 20
cpu13 (AP): APIC ID: 21
cpu14 (AP): APIC ID: 22
cpu15 (AP): APIC ID: 23
ioapic0<Version 2.0> irqs 0-23 on motherboard
ioapic1<Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd0 at kbdmux0
acpi0:<INTEL S5520UR> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0:<24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0:<ACPI CPU> on acpi0
cpu1:<ACPI CPU> on acpi0
cpu2:<ACPI CPU> on acpi0
cpu3:<ACPI CPU> on acpi0
cpu4:<ACPI CPU> on acpi0
cpu5:<ACPI CPU> on acpi0
cpu6:<ACPI CPU> on acpi0
cpu7:<ACPI CPU> on acpi0
cpu8:<ACPI CPU> on acpi0
cpu9:<ACPI CPU> on acpi0
cpu10:<ACPI CPU> on acpi0
cpu11:<ACPI CPU> on acpi0
cpu12:<ACPI CPU> on acpi0
cpu13:<ACPI CPU> on acpi0
cpu14:<ACPI CPU> on acpi0
cpu15:<ACPI CPU> on acpi0
acpi_hpet0:<High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0:<ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0:<ACPI PCI bus> on pcib0
pcib1:<ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0
pci1:<ACPI PCI bus> on pcib1
igb0:<Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0x4020-0x403f mem 0xb1f20000-0xb1f3ffff,0xb1f44000-0xb1f47fff irq 40 at device 0.0 on pci1
igb0: Using MSIX interrupts with 5 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 00:15:17:f2:1b:a0
igb1:<Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0x4000-0x401f mem 0xb1f00000-0xb1f1ffff,0xb1f40000-0xb1f43fff irq 28 at device 0.1 on pci1
igb1: Using MSIX interrupts with 5 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 00:15:17:f2:1b:a1
pcib2:<ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0
pci2:<ACPI PCI bus> on pcib2
pcib3:<PCI-PCI bridge> mem 0xb1e00000-0xb1e1ffff irq 24 at device 0.0 on pci2
pci3:<PCI bus> on pcib3
pcib4:<PCI-PCI bridge> irq 24 at device 0.0 on pci3
pci4:<PCI bus> on pcib4
igb2:<Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0x3020-0x303f mem 0xb1c60000-0xb1c7ffff,0xb1c40000-0xb1c5ffff,0xb1d04000-0xb1d07fff irq 34 at device 0.0 on pci4
igb2: Using MSIX interrupts with 10 vectors
igb2: [ITHREAD]
igb2: [ITHREAD]
igb2: [ITHREAD]
igb2: [ITHREAD]
igb2: [ITHREAD]
igb2: [ITHREAD]
igb2: [ITHREAD]
igb2: [ITHREAD]
igb2: [ITHREAD]
igb2: [ITHREAD]
igb2: Ethernet address: 00:0c:bd:00:9d:eb
igb3:<Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0x3000-0x301f mem 0xb1c20000-0xb1c3ffff,0xb1c00000-0xb1c1ffff,0xb1d00000-0xb1d03fff irq 24 at device 0.1 on pci4
igb3: Using MSIX interrupts with 10 vectors
igb3: [ITHREAD]
igb3: [ITHREAD]
igb3: [ITHREAD]
igb3: [ITHREAD]
igb3: [ITHREAD]
igb3: [ITHREAD]
igb3: [ITHREAD]
igb3: [ITHREAD]
igb3: [ITHREAD]
igb3: [ITHREAD]
igb3: Ethernet address: 00:0c:bd:00:9d:ea
pcib5:<PCI-PCI bridge> irq 34 at device 1.0 on pci3
pci7:<PCI bus> on pcib5
igb4:<Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0x2020-0x203f mem 0xb1a60000-0xb1a7ffff,0xb1a40000-0xb1a5ffff,0xb1b04000-0xb1b07fff irq 35 at device 0.0 on pci7
igb4: Using MSIX interrupts with 10 vectors
igb4: [ITHREAD]
igb4: [ITHREAD]
igb4: [ITHREAD]
igb4: [ITHREAD]
igb4: [ITHREAD]
igb4: [ITHREAD]
igb4: [ITHREAD]
igb4: [ITHREAD]
igb4: [ITHREAD]
igb4: [ITHREAD]
igb4: Ethernet address: 00:0c:bd:00:9d:ed
igb5:<Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0x2000-0x201f mem 0xb1a20000-0xb1a3ffff,0xb1a00000-0xb1a1ffff,0xb1b00000-0xb1b03fff irq 34 at device 0.1 on pci7
igb5: Using MSIX interrupts with 10 vectors
igb5: [ITHREAD]
igb5: [ITHREAD]
igb5: [ITHREAD]
igb5: [ITHREAD]
igb5: [ITHREAD]
igb5: [ITHREAD]
igb5: [ITHREAD]
igb5: [ITHREAD]
igb5: [ITHREAD]
igb5: [ITHREAD]
igb5: Ethernet address: 00:0c:bd:00:9d:ec
pcib6:<PCI-PCI bridge> irq 24 at device 4.0 on pci3
pci10:<PCI bus> on pcib6
pcib7:<PCI-PCI bridge> irq 34 at device 5.0 on pci3
pci11:<PCI bus> on pcib7
pcib8:<ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
pci12:<ACPI PCI bus> on pcib8
pcib9:<ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0
pci13:<ACPI PCI bus> on pcib9
pcib10:<ACPI PCI-PCI bridge> irq 33 at device 10.0 on pci0
pci14:<ACPI PCI bus> on pcib10
pci0:<base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0:<base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0:<base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0:<base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0:<base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0:<base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0:<base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0:<base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0:<base peripheral> at device 22.0 (no driver attached)
pci0:<base peripheral> at device 22.1 (no driver attached)
pci0:<base peripheral> at device 22.2 (no driver attached)
pci0:<base peripheral> at device 22.3 (no driver attached)
pci0:<base peripheral> at device 22.4 (no driver attached)
pci0:<base peripheral> at device 22.5 (no driver attached)
pci0:<base peripheral> at device 22.6 (no driver attached)
pci0:<base peripheral> at device 22.7 (no driver attached)
uhci0:<Intel 82801JI (ICH10) USB controller USB-D> port 0x50c0-0x50df irq 19 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x3000
usbus0:<Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1:<Intel 82801JI (ICH10) USB controller USB-E> port 0x50a0-0x50bf irq 19 at device 26.1 on pci0
uhci1: [ITHREAD]
usbus1:<Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2:<Intel 82801JI (ICH10) USB controller USB-F> port 0x5080-0x509f irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
usbus2:<Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0:<Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xb2021000-0xb20213ff irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3:<Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pcib11:<ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci15:<ACPI PCI bus> on pcib11
mfi0:<LSI MegaSAS 1078> port 0x1000-0x10ff mem 0xb1900000-0xb193ffff,0xb1940000-0xb197ffff irq 16 at device 0.0 on pci15
mfi0: Megaraid SAS driver Ver 3.00
mfi0: 36759 (393046626s/0x0020/info) - Shutdown command received from host
mfi0: 36760 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/3505/8086)
mfi0: 36761 (boot + 3s/0x0020/info) - Firmware version 1.40.232-1007
mfi0: 36762 (boot + 4s/0x0008/info) - Battery Present
mfi0: 36763 (boot + 5s/0x0020/info) - Board Revision
mfi0: 36764 (boot + 49s/0x0002/WARN) - PD 110(e0x00/s16) Path 50001017e03bdc00 reset (Type 03)
mfi0: 36765 (boot + 65s/0x0002/WARN) - PD 111(e0x00/s17) Path 50001017e13bdc00 reset (Type 03)
mfi0: 36766 (boot + 66s/0x0002/WARN) - PD 110(e0x00/s16) Path 50001017e03bdc00 reset (Type 03)
mfi0: 36767 (boot + 82s/0x0002/WARN) - PD 110(e0x00/s16) Path 50001017e03bdc00 reset (Type 03)
mfi0: 36768 (boot + 83s/0x0002/WARN) - PD 111(e0x00/s17) Path 50001017e13bdc00 reset (Type 03)
mfi0: 36769 (boot + 99s/0x0002/WARN) - PD 111(e0x00/s17) Path 50001017e13bdc00 reset (Type 03)
mfi0: 36770 (boot + 100s/0x0002/WARN) - PD 110(e0x00/s16) Path 50001017e03bdc00 reset (Type 03)
mfi0: 36771 (boot + 104s/0x0002/info) - Inserted: PD 01(e0xff/s1)
mfi0: 36772 (boot + 104s/0x0002/info) - Inserted: PD 01(e0xff/s1) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000c5001ab0d441,0000000000000000
mfi0: 36773 (boot + 104s/0x0002/info) - Inserted: PD 02(e0xff/s2)
mfi0: 36774 (boot + 104s/0x0002/info) - Inserted: PD 02(e0xff/s2) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c5001ab0d4ed,0000000000000000
mfi0: 36775 (boot + 104s/0x0002/info) - Inserted: PD 03(e0xff/s3)
mfi0: 36776 (boot + 104s/0x0002/info) - Inserted: PD 03(e0xff/s3) Info: enclPd=ffff, scsiType=0, portMap=04, sasAddr=5000c5001ab0d585,0000000000000000
mfi0: 36777 (boot + 104s/0x0002/info) - Inserted: PD 04(e0xff/s4)
mfi0: 36778 (boot + 104s/0x0002/info) - Inserted: PD 04(e0xff/s4) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c5001ab0d869,0000000000000000
mfi0: 36779 (boot + 104s/0x0002/info) - Inserted: PD 05(e0xff/s5)
mfi0: 36780 (boot + 104s/0x0002/info) - Inserted: PD 05(e0xff/s5) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=5000c5001ab0d655,0000000000000000
mfi0: 36781 (boot + 104s/0x0042/info) - Global Hot Spare created on PD 05(e0xff/s5) (global,rev)
mfi0: 36782 (393046751s/0x0020/info) - Time established as 06/15/12 3:39:11; (113 seconds since power on)
mfi0: [ITHREAD]
pcib12:<ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci16:<ACPI PCI bus> on pcib12
vgapci0:<VGA-compatible display> mem 0xb0000000-0xb0ffffff,0xb1800000-0xb1803fff,0xb1000000-0xb17fffff irq 16 at device 0.0 on pci16
pcib13:<ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci17:<ACPI PCI bus> on pcib13
uhci3:<Intel 82801JI (ICH10) USB controller USB-A> port 0x5060-0x507f irq 16 at device 29.0 on pci0
uhci3: [ITHREAD]
usbus4:<Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4:<Intel 82801JI (ICH10) USB controller USB-B> port 0x5040-0x505f irq 16 at device 29.1 on pci0
uhci4: [ITHREAD]
usbus5:<Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5:<Intel 82801JI (ICH10) USB controller USB-C> port 0x5020-0x503f irq 16 at device 29.2 on pci0
uhci5: [ITHREAD]
usbus6:<Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1:<Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xb2020000-0xb20203ff irq 16 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7:<Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib14:<ACPI PCI-PCI bridge> at device 30.0 on pci0
pci18:<ACPI PCI bus> on pcib14
isab0:<PCI-ISA bridge> at device 31.0 on pci0
isa0:<ISA bus> on isab0
atapci0:<Intel ICH10 SATA300 controller> port 0x5138-0x513f,0x514c-0x514f,0x5130-0x5137,0x5148-0x514b,0x5110-0x511f,0x5100-0x510f irq 18 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2:<ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3:<ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0:<serial bus, SMBus> at device 31.3 (no driver attached)
atapci1:<Intel ICH10 SATA300 controller> port 0x5128-0x512f,0x5144-0x5147,0x5120-0x5127,0x5140-0x5143,0x50f0-0x50ff,0x50e0-0x50ef irq 21 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4:<ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5:<ATA channel 1> on atapci1
ata5: [ITHREAD]
acpi_button0:<Sleep Button> on acpi0
atrtc0:<AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
uart0:<16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: console (9600,n,8,1)
uart1:<16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
pmtimer0 on isa0
orm0:<ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcffff pnpid ORM0000 on isa0
sc0:<System console> at flags 0x100 on isa0
sc0: VGA<16 virtual consoles, flags=0x300>
vga0:<Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: parallel port not found.
est0:<Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0:<CPU Frequency Thermal Control> on cpu0
est1:<Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1:<CPU Frequency Thermal Control> on cpu1
est2:<Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2:<CPU Frequency Thermal Control> on cpu2
est3:<Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3:<CPU Frequency Thermal Control> on cpu3
est4:<Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4:<CPU Frequency Thermal Control> on cpu4
est5:<Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5:<CPU Frequency Thermal Control> on cpu5
est6:<Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6:<CPU Frequency Thermal Control> on cpu6
est7:<Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7:<CPU Frequency Thermal Control> on cpu7
est8:<Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8:<CPU Frequency Thermal Control> on cpu8
est9:<Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9:<CPU Frequency Thermal Control> on cpu9
est10:<Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10:<CPU Frequency Thermal Control> on cpu10
est11:<Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11:<CPU Frequency Thermal Control> on cpu11
est12:<Enhanced SpeedStep Frequency Control> on cpu12
p4tcc12:<CPU Frequency Thermal Control> on cpu12
est13:<Enhanced SpeedStep Frequency Control> on cpu13
p4tcc13:<CPU Frequency Thermal Control> on cpu13
est14:<Enhanced SpeedStep Frequency Control> on cpu14
p4tcc14:<CPU Frequency Thermal Control> on cpu14
est15:<Enhanced SpeedStep Frequency Control> on cpu15
p4tcc15:<CPU Frequency Thermal Control> on cpu15
Timecounters tick every 1.000 msec
mfi0: 36783 (393046780s/0x0008/info) - Battery temperature is normal
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
mfid0:<MFI Logical Disk> on mfi0
mfid0: 278472MB (570310656 sectors) RAID volume '' is optimal
lapic18: Forcing LINT1 to edge trigger
SMP: AP CPU #10 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic17: Forcing LINT1 to edge trigger
SMP: AP CPU #9 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic23: Forcing LINT1 to edge trigger
SMP: AP CPU #15 Launched!
lapic22: Forcing LINT1 to edge trigger
SMP: AP CPU #14 Launched!
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic16: Forcing LINT1 to edge trigger
SMP: AP CPU #8 Launched!
lapic21: Forcing LINT1 to edge trigger
SMP: AP CPU #13 Launched!
lapic19: Forcing LINT1 to edge trigger
SMP: AP CPU #11 Launched!
lapic20: Forcing LINT1 to edge trigger
SMP: AP CPU #12 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
ugen2.1:<Intel> at usbus2ugen5.1:<Intel> at usbus5ugen7.1:<Intel> at usbus7ugen1.1:<Intel> at usbus1ugen4.1:<Intel> at usbus4ugen6.1:<Intel> at usbus6ugen0.1:<Intel> at usbus0ugen3.1:<Intel> at usbus3
uhub0:
<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub1:
<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub2:
<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub3:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub4:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub5:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub6:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub7:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
GEOM_JOURNAL: Journal 3746672352: mfid0s1a contains data.
GEOM_JOURNAL: Journal 3746672352: mfid0s1a contains journal.
GEOM_JOURNAL: Journal mfid0s1a clean.
GEOM_JOURNALuhub0: : 2 ports with 2 removable, self poweredBIO_FLUSH not supported by mfid0s1a.
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self poweredGEOM_JOURNAL
: Journal 137861468: mfid0s1d contains data.uhub7: 2 ports with 2 removable, self powered
GEOM_JOURNAL
uhub6: : 2 ports with 2 removable, self poweredJournal 137861468: mfid0s1d contains journal.
GEOM_JOURNAL: Journal mfid0s1d clean.
GEOM_JOURNAL: BIO_FLUSH not supported by mfid0s1d.
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub5: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus7 usbus3
ugen3.2:<vendor 0x0424> at usbus3
uhub8:<vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on usbus3
ugen7.2:<vendor 0x05e3> at usbus7
umass0:<vendor 0x05e3 USB Storage, class 0/0, rev 2.00/0.09, addr 2> on usbus7
umass0: SCSI over Bulk-Only; quirks = 0x0000
uhub8: 4 ports with 4 removable, self powered
umass0:0:0:-1: Attached to scbus0
Root mount waiting for: usbus7
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status ErrorTrying to mount root from ufs:/dev/ufs/root
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,2 (Medium not present - tray open)
cd0 at umass-sim0 bus 0 scbus0 target 0 lun 0
cd0:<TEAC DV-28S-W 1.2A> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray open
ugen5.2:<vendor 0x0557> at usbus5ugen2.2:<American Megatrends Inc.> at usbus2
uhub9:
<vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 2> on usbus5
ukbd0:<Keyboard Interface> on usbus2
kbd1 at ukbd0
ums0:<Mouse Interface> on usbus2
ums0: 3 buttons and [Z] coordinates ID=0
uhub9: 4 ports with 4 removable, self powered
ugen5.3:<ATEN International Co. Ltd> at usbus5
ukbd1:<ATEN International Co. Ltd GCS1808 V3.0.294, class 0/0, rev 1.10/1.00, addr 3> on usbus5
kbd2 at ukbd1
uhid0:<ATEN International Co. Ltd GCS1808 V3.0.294, class 0/0, rev 1.10/1.00, addr 3> on usbus5
ums1:<ATEN International Co. Ltd GCS1808 V3.0.294, class 0/0, rev 1.10/1.00, addr 3> on usbus5
ums1: 5 buttons and [XYZ] coordinates ID=0
ums2:<ATEN International Co. Ltd GCS1808 V3.0.294, class 0/0, rev 1.10/1.00, addr 3> on usbus5
ums2: 3 buttons and [Z] coordinates ID=0
eth0: link state changed to UP
--
Charles Owens
Great Bay Software, Inc.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4FDABA0B.5030702>