Date: Sat, 13 May 2006 13:59:32 +0000 From: "Angka H. K." <harikurniawan@gmail.com> To: "=?ISO-8859-1?Q?Dag-Erling_Sm=F8rgrav?=" <des@des.no> Cc: current@freebsd.org Subject: Re: DMA no active on HL-DT-STCD-RW/DVD Message-ID: <4c40c4e70605130659q4c486a64u188177bd5eb804f5@mail.gmail.com> In-Reply-To: <86wtcq6psi.fsf@xps.des.no> References: <4c40c4e70605130152s52fb3188nd847a0b8b0d46972@mail.gmail.com> <861wuy8b84.fsf@xps.des.no> <4c40c4e70605130418y3208840ctb0b1c7b1f61b7a74@mail.gmail.com> <86wtcq6psi.fsf@xps.des.no>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
This is the output :
angka# atacontrol mode acd0 udma33
current mode = WDMA2
angka#
Attach is the dmesg of verbose start.
Regards,
On 5/13/06, Dag-Erling Smørgrav <des@des.no> wrote:
> "Angka H. K." <harikurniawan@gmail.com> writes:
> > angka# sysctl hw.ata.atapi_dma
> > hw.ata.atapi_dma: 1
>
> Can't see anything wrong in your dmesg, but could you try to get a
> verbose dmesg?
>
> Also, what happens if you run the following as root:
>
> # atacontrol mode acd0 udma33
>
> DES
> --
> Dag-Erling Smørgrav - des@des.no
>
[-- Attachment #2 --]
Preloaded elf module "/boot/kernel/sound.ko" at 0xc082a2c0.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc082a36c.
Preloaded elf module "/boot/kernel/i915.ko" at 0xc082a414.
Preloaded elf module "/boot/kernel/drm.ko" at 0xc082a4c0.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc082a568.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc082a614.
Table 'APIC' at 0xf6eae88
MADT: Found table at 0xf6eae88
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
ACPI APIC Table: <HP 308F >
Calibrating clock(s) ... i8254 clock: 1193160 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1596161281 Hz
CPU: Intel(R) Pentium(R) M processor 1.60GHz (1596.16-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x180<EST,TM2>
AMD Features=0x100000<NX>
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
Data TLB: 4 KB Pages, 4-way set associative, 128 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line
real memory = 258867200 (246 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000000f24efff, 241344512 bytes (58922 pages)
avail memory = 243806208 (232 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f7bc0
bios32: Entry = 0xfd710 (c00fd710) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd710+0x25e
pnpbios: Found PnP BIOS data at 0xc00f7c10
pnpbios: Entry = f0000:c74d Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
random: <entropy source, Software, Yarrow>
ichwd module loaded
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: INT 16 interface
acpi0: <HP 308F> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25908086)
pcibios: BIOS version 2.10
Found $PIR table, 10 entries at 0xc00fdf20
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 29 A 0x6b 3
embedded 0 29 B 0x63 3
embedded 0 29 C 0x62 4
embedded 0 29 D 0x60 10
embedded 0 30 A 0x61 5
embedded 0 30 B 0x61 5
embedded 0 31 A 0x62 4
embedded 0 31 B 0x63 3
embedded 0 31 D 0x60 10
slot 6 1 0 A 0x60 10
slot 6 1 0 B 0x61 5
slot 6 1 0 C 0x62 4
slot 6 1 0 D 0x63 3
embedded 6 0 A 0x60 10
embedded 6 6 A 0x62 4
embedded 6 6 B 0x63 3
embedded 6 9 A 0x68 11
embedded 6 9 B 0x69 3
embedded 6 9 C 0x6a 4
embedded 0 0 A 0x60 10
embedded 0 0 B 0x61 5
embedded 0 0 C 0x62 4
embedded 0 0 D 0x63 3
embedded 0 2 A 0x60 10
embedded 0 2 B 0x61 5
embedded 0 1 A 0x60 10
embedded 0 1 B 0x61 5
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 0 func 0
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 10
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 10
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 5
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 5
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 4 N 0 4
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 4 N 0 4
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 4
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 11
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 11
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 11
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 4 N 0 4
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 4 N 0 4
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 4
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2590, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2592, revid=0x03
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base b0080000, size 19, enabled
map[14]: type 4, range 32, base 00001800, size 3, enabled
map[18]: type 3, range 32, base c0000000, size 28, enabled
map[1c]: type 1, range 32, base b0000000, size 18, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2792, revid=0x03
bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base 00000000, size 19, memory disabled
found-> vendor=0x8086, dev=0x2658, revid=0x03
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2659, revid=0x03
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
map[20]: type 4, range 32, base 00001840, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x265a, revid=0x03
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=4
map[20]: type 4, range 32, base 00001860, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x265b, revid=0x03
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[20]: type 4, range 32, base 00001880, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x265c, revid=0x03
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base b0040000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2448, revid=0xd3
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x266e, revid=0x03
bus=0, slot=30, func=2
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001c00, size 8, enabled
map[14]: type 4, range 32, base 000018c0, size 6, enabled
map[18]: type 1, range 32, base b0040800, size 9, enabled
map[1c]: type 1, range 32, base b0040400, size 8, enabled
pcib0: matched entry for 0.30.INTA
pcib0: slot 30 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x266d, revid=0x03
bus=0, slot=30, func=3
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00002400, size 8, enabled
map[14]: type 4, range 32, base 00002000, size 7, enabled
pcib0: matched entry for 0.30.INTB
pcib0: slot 30 INTB hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2641, revid=0x03
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x266f, revid=0x03
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=4
map[20]: type 4, range 32, base 00001810, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x266a, revid=0x03
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
map[20]: type 4, range 32, base 000020a0, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0000000-0xb003ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xb0080000
vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xb0080000
vgapci0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xb0000000
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
drm0: <Intel i915GM> on vgapci0
info: [drm] AGP at 0xb0080000 0MB
info: [drm] Initialized i915 1.4.0 20060119
vgapci1: <VGA-compatible display> at device 2.1 on pci0
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1820-0x183f irq 23 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 49
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1840-0x185f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1880-0x189f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0040000-0xb00403ff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xb0040000
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 6
pcib1: subordinate bus 6
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xb0100000-0xb01fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: Subtractively decoded bridge.
pci6: <ACPI PCI bus> on pcib1
pci6: physical bus=6
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=6, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00003000, size 8, enabled
pcib1: (null) requested I/O range 0x3000-0x30ff: in range
map[14]: type 1, range 32, base b0108000, size 8, enabled
pcib1: (null) requested memory range 0xb0108000-0xb01080ff: good
pcib1: matched entry for 6.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x14e4, dev=0x4318, revid=0x02
bus=6, slot=6, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=4
map[10]: type 1, range 32, base b0104000, size 13, enabled
pcib1: (null) requested memory range 0xb0104000-0xb0105fff: good
pcib1: matched entry for 6.6.INTA
pcib1: slot 6 INTA hardwired to IRQ 18
found-> vendor=0x104c, dev=0x8031, revid=0x00
bus=6, slot=9, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
found-> vendor=0x104c, dev=0x8032, revid=0x00
bus=6, slot=9, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
intpin=c, irq=4
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b0108800, size 11, enabled
pcib1: (null) requested memory range 0xb0108800-0xb0108fff: good
map[14]: type 1, range 32, base b0100000, size 14, enabled
pcib1: (null) requested memory range 0xb0100000-0xb0103fff: good
pcib1: matched entry for 6.9.INTC
pcib1: slot 9 INTC hardwired to IRQ 22
found-> vendor=0x104c, dev=0x8033, revid=0x00
bus=6, slot=9, func=3
class=01-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b0106000, size 13, enabled
pcib1: (null) requested memory range 0xb0106000-0xb0107fff: good
pcib1: matched entry for 6.9.INTA
pcib1: slot 9 INTA hardwired to IRQ 20
found-> vendor=0x104c, dev=0x8034, revid=0x00
bus=6, slot=9, func=4
class=08-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b0109400, size 8, enabled
pcib1: (null) requested memory range 0xb0109400-0xb01094ff: good
map[14]: type 1, range 32, base b0109000, size 8, enabled
pcib1: (null) requested memory range 0xb0109000-0xb01090ff: good
map[18]: type 1, range 32, base b0108400, size 8, enabled
pcib1: (null) requested memory range 0xb0108400-0xb01084ff: good
pcib1: matched entry for 6.9.INTA
pcib1: slot 9 INTA hardwired to IRQ 20
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3000
pcib1: rl0 requested I/O range 0x3000-0x30ff: in range
rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem 0xb0108000-0xb01080ff irq 16 at device 0.0 on pci6
pcib1: rl0 requested I/O range 0x3000-0x30ff: in range
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:c0:9f:ef:c6:21
rl0: [MPSAFE]
pci6: <network> at device 6.0 (no driver attached)
cbb0: <TI6411 PCI-CardBus Bridge> at device 9.0 on pci6
pcib1: cbb0 requested memory range 0xb0100000-0xb01fffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xb010a000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib1: matched entry for 6.9.INTA
pcib1: slot 9 INTA hardwired to IRQ 20
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x8031104c 0x02100007 0x06070000 0x00822000
0x10: 0xb010a000 0x020000a0 0x20080706 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07400114
0x40: 0x3080103c 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x08441060 0x00000000 0x000f0000 0x01a01b22
0x90: 0x606480c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x08000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fwohci0: vendor=104c, dev=8032
fwohci0: vendor=104c, dev=8032
fwohci0: <1394 Open Host Controller Interface> mem 0xb0108800-0xb0108fff,0xb0100000-0xb0103fff irq 22 at device 9.2 on pci6
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xb0108800
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:76:40:e7
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:76:40:e7
fwe0: bpf attached
fwe0: Ethernet address: 02:c0:9f:76:40:e7
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci6: <mass storage> at device 9.3 (no driver attached)
pci6: <base peripheral> at device 9.4 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xb0040800-0xb00409ff,0xb0040400-0xb00404ff irq 17 at device 30.2 on pci0
pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xb0040800
pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xb0040400
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 55
pcm0: [MPSAFE]
pcm0: <Conexant CX20468-21 AC97 Codec (id = 0x43585430)>
pcm0: Codec features reserved, headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features reserved 1, AMAP, reserved 5
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap f0f2000, 4000; 0xcbf29000 -> f0f2000
pcm0: sndbuf_setmap f0db000, 4000; 0xcbf2d000 -> f0db000
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f irq 18 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 56
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 57
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_hpet0: <HPET - High Precision Event Timers> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
acpi_hpet0: Vendor: 0x8086
acpi_hpet0: Leg_Route_Cap: 1
acpi_hpet0: Count_Size_Cap: 1
acpi_hpet0: Num_Tim_Cap: 1
acpi_hpet0: Rev_id: 0x1
acpi_hpet0: Period: 69841279 fs (14318180 Hz)
acpi_hpet0: HPET attach
Timecounter "HPET" frequency 14318180 Hz quality -200
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 59
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf800-0xd07ff,0xdf000-0xdf7ff,0xe0000-0xe3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 49880041 hz
Timecounter "TSC" frequency 1596161281 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
atapicam: atapicam0 already exists; skipping it
ad0: setting PIO4 on ICH6 chip
ad0: setting UDMA100 on ICH6 chip
ad0: 57231MB <IC25N060ATMR04 0 MO3OAD5A> at ata0-master UDMA100
ad0: 117210240 sectors [116280C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
acd0: setting PIO4 on ICH6 chip
battery0: battery initialization done, tried 1 times
acd0: <HL-DT-STCD-RW/DVD DRIVE GCC-4244N/1.02> CDRW drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 47990 Hz, will use 48000 Hz
(probe7:ata0:0:1:0): error 22
(probe7:ata0:0:1:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
pass0 at ata0 bus 0 target 1 lun 0
pass0: <HL-DT-ST RW/DVD GCC-4244N 1.02> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
pass0 at ata0 bus 0 target 1 lun 0
pass0: <HL-DT-ST RW/DVD GCC-4244N 1.02> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
Trying to mount root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
rl0: link state changed to DOWN
rl0: link state changed to UP
acd0: setting PIO4 on ICH6 chip
acd0: setting WDMA2 on ICH6 chip
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4c40c4e70605130659q4c486a64u188177bd5eb804f5>