Date: Fri, 14 May 2004 11:56:50 +0200 From: Jan Lentfer <lentferj@bio.tu-darmstadt.de> To: freebsd-amd64@freebsd.org, obrien@freebsd.org Subject: Re: Hp Pavilion zv5188EA and 5.2.1 Message-ID: <200405141156.50567.lentferj@bio.tu-darmstadt.de> In-Reply-To: <20040510175020.GA63294@dragon.nuxi.com> References: <1083687969.4097c4211d107@amdahl.bio.tu-darmstadt.de> <200405100837.23142.lentferj@bio.tu-darmstadt.de> <20040510175020.GA63294@dragon.nuxi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Am Montag, 10. Mai 2004 19:50 schrieb David O'Brien:
> On Mon, May 10, 2004 at 08:37:22AM +0200, Jan Lentfer wrote:
> > Sorry for the late response. I tried but the results were exactly the
> > same. I
>
> ...
>
> > But I am still looking forward to load FreeBSD on to my machine. Would it
> > help you if I send dmesg, lspic, etc ?
>
> It could, the more data the better. I have access to an eMachines AMD64
> laptop that I hope to get FreeBSD/amd64 running on in late June (sounds
> like a great USENIX terminal room activity).
dmesg:
Bootdata ok (command line is BOOT_IMAGE=linux ro root=302 devfs=mount
resume=/dev/hda3 splash=silent)
Linux version 2.6.3-9mdkcustom (root@neslonek) (gcc version 3.3.2 (Mandrake
Linux 10.0 3.3.2-6.1mdk)) #4 Sun May 9 19:31:38 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
BIOS-e820: 000000001ff70000 - 000000001ff7f000 (ACPI data)
BIOS-e820: 000000001ff7f000 - 000000001ff80000 (ACPI NVS)
BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
ACPI: have wakeup address 0x10000001000
No mptable found.
No mptable found.
No mptable found.
No mptable found.
On node 0 totalpages: 130928
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126832 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
PCI bridge 00:0a from 10de found. Setting "noapic". Overwrite with "apic"
ACPI: RSDP (v000 PTLTD ) @
0x00000000000f72a0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @
0x000000001ff7a9b2
ACPI: FADT (v001 NVIDIA CK8 0x06040000 PTL_ 0x000f4240) @
0x000000001ff7ee13
ACPI: MADT (v001 NVIDIA NV_APIC_ 0x06040000 LTP 0x00000000) @
0x000000001ff7ee87
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @
0x000000001ff7eee1
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @
0x000000001ff7ef09
ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @
0x0000000000000000
ACPI: Local APIC address 0x00000000fee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Checking aperture...
CPU 0: aperture @ e8000000 size 128 MB
Built 1 zonelists
Kernel command line: BOOT_IMAGE=linux ro root=302 devfs=mount resume=/dev/hda3
splash=silent console=tty0
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 16 (order 4: 256 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 797.950 MHz processor.
Console: colour dummy device 80x25
Memory: 508928k/523712k available (2322k kernel code, 14020k reserved, 803k
data, 152k init)
Calibrating delay loop... 1581.05 BogoMIPS
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 08
POSIX conformance testing by UNIFIX
Using local APIC NMI watchdog using perfctr0
Using local APIC timer interrupts.
Detected 12.467 MHz APIC timer.
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040211
Looking for DSDT in initrd ... not found!
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 33)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUS0] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUS1] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUS2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LPID] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LTID] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11
ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 10
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 10
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xe8000000
PCI-DMA: Disabling IOMMU.
vesafb: framebuffer at 0xf0000000, mapped to 0xffffff0000054000, size 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
SGI XFS with ACLs, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 54171
bytes, found (800x600, 54123 bytes, v3).
Console: switching to colour frame buffer device 92x33
pty: 1024 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3: IDE controller at PCI slot 0000:00:08.0
NFORCE3: chipset revision 165
NFORCE3: not 100% native mode: will probe irqs later
NFORCE3: BIOS didn't set cable bits correctly. Enabling workaround.
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3: 0000:00:08.0 (rev a5) UDMA133 controller
ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2088-0x208f, BIOS settings: hdc:DMA, hdd:pio
hda: HITACHI_DK23FA-60, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SD-R6252, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
Resume Machine: resuming from /dev/hda3
Resuming from device hda3
Resume Machine: This is normal swap space
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
XFS mounting filesystem hda2
Ending clean XFS mount for filesystem: hda2
Mounted devfs on /dev
Freeing unused kernel memory: 152k freed
Real Time Clock Driver v1.12
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 80 td 96
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 11, pci mem ffffff0001059000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:02.1: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 10, pci mem ffffff000105b000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci_hcd 0000:00:02.2: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 10, pci mem ffffff000105d000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
Adding 2000084k swap on /dev/hda3. Priority:-1 extents:1
NTFS driver 2.1.6 [Flags: R/W MODULE].
NTFS volume version 3.1.
ohci1394: $Rev: 1097 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e0106000-e01067ff]
Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[433f0200433f0200]
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xffffff0001072800, 00:02:3f:6f:8c:fb, IRQ 10
eth0: Identified 8139 chip type 'RTL-8101'
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (21 C)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
Yenta: CardBus bridge found at 0000:02:04.0 [103c:006d]
Yenta: ISA IRQ mask 0x00f8, PCI irq 11
Socket status: 30000006
Yenta: CardBus bridge found at 0000:02:04.1 [103c:006d]
Yenta: ISA IRQ mask 0x00f8, PCI irq 10
Socket status: 30000006
NET: Registered protocol family 17
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49514 usecs
intel8x0: clocking to 47376
mtrr: 0xf0000000,0x4000000 overlaps existing 0xf0000000,0x1000000
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
lp0: console ready
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 23202
bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 23202
bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 23202
bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 23202
bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 23202
bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 23202
bytes, v3).
bootsplash: status on console 5 changed to on
input: PS/2 Generic Mouse on isa0060/serio4
ts: Compaq touchscreen protocol output
inserting floppy driver for 2.6.3-9mdkcustom
floppy0: no floppy controllers found
inserting floppy driver for 2.6.3-9mdkcustom
floppy0: no floppy controllers found
inserting floppy driver for 2.6.3-9mdkcustom
floppy0: no floppy controllers found
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
SCSI subsystem initialized
lspci -v
00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
Flags: bus master, 66Mhz, fast devsel, latency 0
Memory at 00000000e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <available only to root>
00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6)
Subsystem: nVidia Corporation: Unknown device 0c80
Flags: bus master, 66Mhz, fast devsel, latency 0
00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
Subsystem: Hewlett-Packard Company: Unknown device 006d
Flags: 66Mhz, fast devsel, IRQ 10
I/O ports at 2040 [size=64]
I/O ports at 2000 [size=64]
Capabilities: <available only to root>
00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if
10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c80
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
Memory at 00000000e0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if
10 [OHCI])
Subsystem: nVidia Corporation: Unknown device 0c80
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 10
Memory at 00000000e0001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2) (prog-if
20 [EHCI])
Subsystem: nVidia Corporation: Unknown device 0c80
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 10
Memory at 00000000e0004000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)
Subsystem: Hewlett-Packard Company: Unknown device 006d
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
I/O ports at 1400 [size=256]
I/O ports at 1c00 [size=128]
Memory at 00000000e0002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:06.1 Modem: nVidia Corporation: Unknown device 00d9 (rev a2) (prog-if 00
[Generic])
Subsystem: Hewlett-Packard Company: Unknown device 006d
Flags: 66Mhz, fast devsel, IRQ 10
I/O ports at 1800 [size=256]
I/O ports at 1c80 [size=128]
Memory at 00000000e0003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) (prog-if 8a
[Master SecP PriP])
Subsystem: nVidia Corporation: Unknown device 0c80
Flags: bus master, 66Mhz, fast devsel, latency 0
I/O ports at 2080 [size=16]
Capabilities: <available only to root>
00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2) (prog-if 00
[Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
I/O behind bridge: 00003000-00007fff
Memory behind bridge: e0100000-e17fffff
00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4) (prog-if 00
[Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
Memory behind bridge: e2000000-e2ffffff
Prefetchable memory behind bridge: f0000000-f80fffff
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Flags: fast devsel
Capabilities: <available only to root>
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Flags: fast devsel
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 440 Go
64M] (rev a3) (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company: Unknown device 006d
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 11
Memory at 00000000e2000000 (32-bit, non-prefetchable) [size=16M]
Memory at 00000000f0000000 (32-bit, prefetchable) [size=128M]
Memory at 00000000f8000000 (32-bit, prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company: Unknown device 006d
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 00000000e0106000 (32-bit, non-prefetchable) [size=2K]
Memory at 00000000e0100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <available only to root>
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Hewlett-Packard Company: Unknown device 006b
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at 7000 [size=256]
Memory at 00000000e0106800 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
02:04.0 CardBus bridge: Texas Instruments: Unknown device ac54 (rev 01)
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 00000000e0104000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: e0200000-e03ff000 (prefetchable)
Memory window 1: e0400000-e05ff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
02:04.1 CardBus bridge: Texas Instruments: Unknown device ac54 (rev 01)
Flags: bus master, medium devsel, latency 168, IRQ 10
Memory at 00000000e0105000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: e1000000-e13ff000 (prefetchable)
Memory window 1: e0c00000-e0fff000
I/O window 0: 00006000-00006fff
I/O window 1: 00005000-00005fff
02:04.2 System peripheral: Texas Instruments: Unknown device 8201 (rev 01)
Subsystem: Hewlett-Packard Company: Unknown device 006d
Flags: bus master, medium devsel, latency 64
I/O ports at 7400 [size=64]
Capabilities: <available only to root>
hth,
Jan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200405141156.50567.lentferj>