Date: Wed, 8 Dec 2004 16:13:09 GMT From: Daniel Graupner <Daniel.Graupner@informatik.tu-chemnitz.de> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/74852: page fault: after a few days init causes page fault Message-ID: <200412081613.iB8GD9w0067501@www.freebsd.org> Resent-Message-ID: <200412081620.iB8GKMxw069146@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 74852
>Category: kern
>Synopsis: page fault: after a few days init causes page fault
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Dec 08 16:20:22 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: Daniel Graupner
>Release: 5.3 RELEASE, i386
>Organization:
Radio UNiCC e.V.
>Environment:
FreeBSD dell 5.3-STABLE FreeBSD 5.3-STABLE #1: Mon Dec 6 12:35:22 CET 2004 root@dell:/usr/obj/usr/src/sys/UNICC i386
>Description:
I installed FreeBSD 5.3 from the ISOs on a Dell SMP-Machine. Every two or three days the machine crashes. I enabled KDB and here is the screen:
kernel trap 12_ page fault with interrupts enabled
fatel trap 12: page fault while in kernel mode
cpuid=0 apic id=00
fault virtual address=0x8
fault code=supervisor write, page not present
<pointers>
processor flags=resume,iopl=0
current process = 1 (init)
[thread 100002]
stopped at sleepq_add + 0x66:movl ...
Its everytime the same output, before I enabled debugging it looked like this:
<snip>
current process=1 (init)
trap number=12
panic: page fault
cpuid=2
boot() called on cpu #2
Uptime: 2d12h15m24s
spin lock sleepq chain held by 0xc1984320 for > 5 seconds
There is another strange thing i experienced. As i turned on debugging i limited the physical memory from 512 to 256 MB (new kernel with MAXMEM), the machine works for more than 6d. Afterwards I thought everything might be ok and raised the MAXMEM to 512 MB, one day later the machine crashed with the above message.
dmesg of the machine:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #1: Mon Dec 6 12:35:22 CET 2004
root@dell:/usr/obj/usr/src/sys/UNICC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SS
E2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 536608768 (511 MB)
avail memory = 515436544 (491 MB)
ACPI APIC Table: <DELL PE1800 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic1: WARNING: intbase 32 != expected base 24
ioapic2: Changing APIC ID to 10
ioapic2: WARNING: intbase 64 != expected base 56
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
bktr_mem: memory holder loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE1800> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
atapci0: <SiI 3112 SATA150 controller> port 0xecc0-0xeccf,0xecd8-0xecdb,0xece0-0xece7,0xecf0-0xecf3,0xecf8-0xecff mem 0xdfdffc
00-0xdfdffdff irq 37 at device 5.0 on pci2
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
pci1: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xdcc0-0xdcff mem 0xdfbe0000-0xdfbfffff irq 69 at device 7.
0 on pci3
em0: Ethernet address: 00:0f:1f:f9:84:f8
em0: Speed:N/A Duplex:N/A
pci1: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbce0-0xbcff irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbcc0-0xbcdf irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbca0-0xbcbf irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
bktr0: <BrookTree 848A> mem 0xd7fff000-0xd7ffffff irq 20 at device 3.0 on pci6
bktr0: [GIANT-LOCKED]
bktr0: Pinnacle/Miro TV, Temic PAL tuner.
pci6: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
atapci2: <Intel ICH5 SATA150 controller> port 0xbc60-0xbc6f,0xbc78-0xbc7b,0xbc80-0xbc87,0xbc90-0xbc93,0xbc98-0xbc9f irq 18 at
device 31.2 on pci0
ata4: channel #0 on atapci2
ata5: channel #1 on atapci2
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xcf800-0xd37ff,0xcb000-0xcf7ff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDRW <R/RW 2x2x24/1.4> at ata0-master PIO4
ad4: 152627MB <SAMSUNG SP1614C/SW100-27> [310101/16/63] at ata2-master SATA150
ad6: 152627MB <SAMSUNG SP1614C/SW100-27> [310101/16/63] at ata3-master SATA150
ad8: 76293MB <Maxtor 6Y080M0/YAR51HW0> [155009/16/63] at ata4-master SATA150
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
GEOM_MIRROR: Device data created (id=288868608).
GEOM_MIRROR: Device data: provider ad4 detected.
GEOM_MIRROR: Device data: provider ad6 detected.
GEOM_MIRROR: Device data: provider ad6 activated.
GEOM_MIRROR: Device data: provider mirror/data launched.
If you need more information, just mail.
>How-To-Repeat:
In my case i have to do nothing, it will happen every few days. I have no idea why.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200412081613.iB8GD9w0067501>