Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 28 Apr 1995 08:08:01 -0400 (EDT)
From:      Marc Ramirez <mrami@mramirez.sy.yale.edu>
To:        "Rodney W. Grimes" <rgrimes@gndrsh.aac.dev.com>
Cc:        dufault@hda.com, joerg_wunsch@uriah.heep.sax.de, freebsd-bugs@freefall.cdrom.com
Subject:   Re: i386/369: (AHA1542A problems)
Message-ID:  <Pine.BSI.3.91.950428075610.351A-100000@mramirez.sy.yale.edu>
In-Reply-To: <199504280808.BAA05769@gndrsh.aac.dev.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 28 Apr 1995, Rodney W. Grimes wrote:

> > automatic Request Sense	disabled	(???)
> 
> If you indeed to have a jumper installed on J6 pin pair 5, please remove
> it, that is the default setting for an aha154X card.

I'm sorry; it is enabled, which is the default, as you have just said.


Another thing, let me show you the probe messages for my disks under 2.0R:

aha0: reading board settings, dma=5 int=11  (bus speed defaulted)
aha0 at 0x330-0x333 irq 11 drq 5 on isa
aha0 waiting for scsi devices to settle
aha0 targ 0 lun 0: type 0(direct) fixed SCSI2
aha0 targ 0 lun 0: <CONNER  CFA540S         090?>
sd0: 515MB (1056708 total sec), 2800 cyl, 4 head, 94 sec, bytes/sec 512
aha0 targ 1 lun 0: type 0(direct) fixed SCSI1
aha0 targ 1 lun 0: <MAXTOR  7120SCS         3330>
sd1: 121MB (248502 total sec), 1498 cyl, 4 head, 41 sec, bytes/sec 512

There doesn't happen to be a problem that I'm unaware of with mixing SCSI 
disk types, does there?

Marc.

--
You couldn't get a clue during the clue mating season in a field full of
horny clues if you smeared your body with clue musk and did the clue
mating dance. 
					- Edward Flaherty





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.91.950428075610.351A-100000>