Date: Fri, 05 Sep 2008 09:51:03 +0800 From: Chih Liang <chih.liang@ipeen.com.tw> To: Miroslav Lachman <000.fbsd@quip.cz> Cc: freebsd-stable@freebsd.org Subject: Re: boot failed after make installkernel from 6.3-RELEASE to 7.0-RELEASE Message-ID: <48C09087.2030205@ipeen.com.tw> In-Reply-To: <48BFD461.6070606@quip.cz> References: <48BFC40C.3050309@ipeen.com.tw> <48BFD461.6070606@quip.cz>
next in thread | previous in thread | raw e-mail | index | archive | help
Miroslav Lachman 提到: > Chih Liang wrote: > >> Dear all, >> >> I've tried to upgrade my FreeBSD server from 6.3-RELEASE to >> 7.0-RELEASE, but it is failed to boot after make kernel >> KERNCONF=GENERIC. >> I didn't modify any file at /usr/src/sys/i386/conf, it was all default. >> After done make kernel and reboot, system stop at: >> >> Timecounters tick every 1.000 msec >> ad0: 38166MB <Seagate ST340016A 3.75> at ata0-master UDMA100 >> >> I can't boot in single mode, but I can boot in safe mode, and it showed: >> >> Manual root filesystem specification: >> <fstype>:<device> Mount <device> using filesystem <fstype> >> eg. ufs:da0s1a >> ? List valid disk boot devices >> <empty line> Abort manual input >> >> I type "?" for list, but it only show acd0 and fdc0, "ufs:ad0s1a" or >> "ufs:/dev/ad0s1a" are not working >> >> I can boot with /boot/kernel.old now (6.3-RELEASE), I rebuilt kernel >> again and again, but still not work. >> I check the difference between old GENERIC on 6.3-RELEASE and new >> GENERIC on 7.0-RELEASE, it has not difference besides new add in >> 7.0-RELEASE. >> >> Is any one can help me? I don't want to reinstall...because I don't >> have install cd... >> >> And sorry for my poor English, thank you for reading! > > What is your hardware setup? (post dmesg) > > I have bad experience with some old PC with nForce 2 chipset. This > machine is unbootable with 7.x kernel, so I am using it with 6.3. (it > can't boot even from 7.x CD) > > Miroslav Lachman > Here is my /var/run/dmesg.boot: Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.3-RELEASE-p3 #0: Wed Sep 3 15:58:00 CST 2008 root@daxiongb:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) Processor (801.83-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x631 Stepping = 1 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow!+,3DNow!> real memory = 335478784 (319 MB) avail memory = 318791680 (304 MB) kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Sep 3 2008 15:57:08) acpi0: <AMIINT > on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> mem 0xe0000000-0xe0ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686A UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 7.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 12 at device 7.3 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 7.4 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xdfffff00-0xdfffffff irq 9 at device 13.0 on pci0 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:40:c7:81:90:ca pci0: <multimedia, audio> at device 14.0 (no driver attached) acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 801825289 Hz quality 800 Timecounters tick every 1.000 msec hptrr: no controller detected. ad0: 39266MB <IC35L040AVVN07 0 VA2OAG0A> at ata0-master UDMA66 acd0: CDRW <LITE-ON LTR-48246S/SS0E> at ata1-slave UDMA33 Trying to mount root from ufs:/dev/ad0s1a rl0: link state changed to UP Is it the VIA chipset?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48C09087.2030205>