Date: Sat, 31 Mar 2001 02:01:50 +0900 (JST) From: kaz@kobe1995.net To: FreeBSD-gnats-submit@freebsd.org Cc: kaz@kobe1995.net Subject: bin/26222: burncd(1) can NOT burn CD-RW with NEC NR7500 Message-ID: <200103301701.f2UH1ov04036@safa.kobe1995.net>
next in thread | raw e-mail | index | archive | help
>Number: 26222
>Category: bin
>Synopsis: burncd(1) can't burn CD-RW with NEC NR7500
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Mar 30 09:10:01 PST 2001
>Closed-Date:
>Last-Modified:
>Originator: NAKAMURA Kazushi
>Release: FreeBSD 4.2-RELEASE i386
>Organization:
PC shop LABBIT in KOBE
>Environment:
The CD-RW drive is connected as primary-master with M/B's IDE
connector. (It is also failed to connect to promise ATA100 line.)
The dmesg (after failed burncd 2 times) is
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT 2000
jkh@bento.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (232.19-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 61091840 (59660K bytes)
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xc000-0xc00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 10 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <VIA 82C586B ACPI interface> at device 7.3 on pci0
atapci1: <Promise ATA100 controller> port 0xd800-0xd83f,0xd400-0xd403,0xd000-0xd007,0xcc00-0xcc03,0xc800-0xc807 mem 0xeb000000-0xeb01ffff irq 9 at device 9.0 on pci0
ata2: at 0xc800 on atapci1
ata3: at 0xd000 on atapci1
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xdc00-0xdc1f irq 9 at device 11.0 on pci0
ed0: address 00:60:67:48:61:f2, type NE2000 (16 bit)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad4: 58625MB <Maxtor 96147H6> [119112/16/63] at ata2-master UDMA100
ad6: 58625MB <Maxtor 96147H6> [119112/16/63] at ata3-master UDMA100
acd0: CD-RW <_NEC NR-7500A> at ata0-master using PIO4
Mounting root from ufs:ad4s1a
ccd0-3: Concatenated disk drivers
acd0: READ_TOC - ILLEGAL REQUEST asc=24 ascq=00 error=04
acd0: MODE_SELECT_BIG - ILLEGAL REQUEST asc=26 ascq=00 error=04
acd0: MODE_SELECT_BIG - ILLEGAL REQUEST asc=26 ascq=00 error=04
>Description:
# burncd -f /dev/acd0c -s 4 audio *.raw fixate
burncd: ioctl(CDRIOCOPENTRACK): Input/output error
Immediately, this error message is displayed. And it is not burned CD-RW.
While, DATA-CD (cd1.iso is iso-image of NetBSD1.5):
# burncd -f /dev/acd0c -s 4 data cd1.iso fixate
burncd: ioctl(CDRIOCOPENTRACK): Input/output error
same message is displayed immediately, and not burned. But
# burncd -f /dev/acd0c -s 4 blank
is success.
>How-To-Repeat:
# burncd blah blah
>Fix:
Sorry, I can't fix. But I heard ATAPI CD-R(W) drives has not
a standard,(opposite to SCSI drives). So the commands to ioctl
are different by CD-R(W) drives, in case of ATAPI.
--
Ãæ¼Ï»֡÷¿À¸Í <mailto:kaz@kobe1995.net>
NAKAMURA Kazushi@KOBE <http://kobe1995.net/>;
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200103301701.f2UH1ov04036>