Date: Tue, 19 Aug 2003 11:11:28 +0200 From: "Markus Paluschek" <warex@vsh.pl> To: "Cagle, John (ISS-Houston)" <john.cagle@hp.com>, <freebsd-smp@freebsd.org> Subject: Re: problem with smp on FreeBSD-5.1 Message-ID: <001701c36631$e0059a00$5bc8cdc3@xxxifh6kxt8och> References: <C50AB9511EE59B49B2A503CB7AE1ABD1067F2689@cceexc19.americas.cpqcorp.net>
next in thread | previous in thread | raw e-mail | index | archive | help
> -----Original Message----- > From: Markus Paluschek [mailto:warex@vsh.pl] > Sent: Monday, August 18, 2003 5:47 AM > To: freebsd-smp@freebsd.org > Subject: problem with smp on FreeBSD-5.1 > > I have Compaq Proliant ML350 server machine with configuration: > 2x Pentium Xeon 2,4 GHz > 1200 MB ram > 2x SCSI hard disks > RAID smart array 641 controller > > When i recompiled kernel from sources downloaded by cvsup, it > compiled well, > but when > i've rebooted and started booting from new kernel and booting > have stuck in > suck process: > ........................ > CPU: Intel(R) Xeon (TM) CPU 2,40GHz (2392.25-MHz 686-class CPU) > Origin = "GenuineIntel" id = 0xf27 Stepping = 7 > > Features=0xbfebf9ff<FPU,VMe,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTR > R,PGE,MCA,CMOV > ,P > AR, PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memor = 1342152704 (1279 MB) > avail memory = 1299877888 (1239 MB) > Changing APIC ID for IO APIC #0 from 0 to 2 on chip > Changing APIC ID for IO APIC #1 from 0 to 3 on chip > Changing APIC ID for IO APIC #2 from 0 to 4 on chip > Changing APIC ID for IO APIC #3 from 0 to 5 on chip > Programming 16 pins in IOAPIC #0 > IOAPIC #0 intpin 2 -> irq 0 > Programming 16 pins in IOAPIC #1 > Programming 16 pins in IOAPIC #2 > Programming 16 pins in IOAPIC #3 > > Now i can only reboot machine by manual reseting. > I haven't found anything on google. > Those FreeBSD have been installed from CD. > > best regards > Markus Paluschek >Make sure your ROM BIOS setup has the OS type configured for Linux. I have tryed on UNIXWARE, Other and Linux with same results - dont work as i've showed above. >Does it work if only 1 processor is installed? Yes, in default instalation its working couse only 1 procesor is used by default. >The next four lines in the boot log should be something like: >> >FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 >cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 >cpu2 (AP): apic id: 2, version: 0x00050014, at 0xfee00000 >cpu3 (AP): apic id: 3, version: 0x00050014, at 0xfee00000 >> >Do you see any of these lines? No, i don't it freeze in this line: Programming 16 pins in IOAPIC #3 >> >Regards, >John
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001701c36631$e0059a00$5bc8cdc3>